|
|
|
|
|
|
The Retsch high-speed Planetary Ball Mill PM 100 pulverizes and mixes soft, medium-hard and even extremely hard, brittle and fibrous materials. The PM 100 is a single-station unit suitable for jars from 12 ml to 500 ml. Both wet and dry grinding is possible. The Planetary Ball Mill can be used successfully in almost every field of industry and research, particularly where the requirements for purity, speed, reproducibility and fineness are very high.
The Planetary Ball Mill produce extremely high centrifugal forces with very high pulverization energies which results in short grinding times.
Product Advantages:
extreme speeds for particularly high final fineness
up to 50% higher energy input
grinding jar volumes from 12 ml to 500 ml
suitable for long-term trials and continuous use
safe and stable operation
reproducible results due to energy and speed control
10 combinations of grinding parameters can be stored
graphics display and ergonomic 1-button operation
automatic grinding chamber ventilation for grinding with solvents
2-year warranty, CE-conforming
|
|
The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, hard, brittle and fibrous materials to analytical fineness.
Grinding sets made from hardened chrome steel, tungsten carbide, agate and zirconium oxide permit a wide range of applications. The RS 200 is primarily used for sample preparation for spectral analysis.
Product Advantages:
- powerful Stabilized-Plane-Drive
- excellent reproducibility
- analytical fineness in seconds
- 1-button operation with graphics display
- 10 parameter combinations can be stored
- grinding tools in 5 different materials
- quick-action grinding set clamping device
- agate recognition for automatic speed reduction
- sealed, noise-insulated grinding chamber
- maintenance-free, CE-conforming design
- 2 year warranty
|
|
Colloid mill works with shearing，grinding high-speed stirring．Grinding process occurs in the relative movement between the two teeth with one revolving in high speed and another still，which makes the material between the teeth receive strong shearing and abrasion in addition to high frequency vibration and high speed swirl．The above forces effectively evenly disperse，emulsify，smash the material.
JM-F/L is a new equipment that wet processes superfine grain．whichisusedto homogen。emulsify。mixand smash various semi-liquids．1iquids and latex emulsion.
|
|
|
Ball mills are the most effective laboratory mills for batch-wise, rapid comminution of medium-hard to very hard samples down to the finest particle sizes. The grinding can take place dry or wet. Grinding sets of many different materials are available. The mills can also be used for mixing and homogenisation.
|
|
|
|
|
|
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
FASTER, SIMPLER AND SAFER THAN EVER.
- Revolutionary rotational speeds of up to 1100 rpm
- Ultrafine grinding results down into the nano range
- Finer grinding results in shorter time
- Sensational centrifugal accelerations of up to 95 times the force of gravity
- 150% greater energy application than conventional Planetary Mills
- For the first time, the bowl and lid form a single unit – no additional tensioning, no incorrect operation!
- Extremely easy grinding bowl change in a second with just two motions
- Grinding bowls position themselves and snap securely into place
- The bowl mountings rotate automatically into a convenient position for handling
- Automatic check of the locks in the mill
- Blockage in the event of impermissible operating states
- Automatic parameter check performed before every grinding, guarantees exact reproducibility
- Via USB, Bluetooth and Ethernet all data can be easily exported to save time
FRITSCH Planetary Mills premium line are ideally suited for loss-free grinding down to a fineness as small as 100 nm. The grinding can be performed dry, in suspension or in an inert gas as well as for mixing and homogenising emulsions and pastes or for mechanical activation and alloying.
|
|
The FRITSCH Disk Mill is most suited for size reduction
within the medium particle size range. Comminution takes
place through pressure and shearing force.
|
|
|
The RETSCH Disc Mill DM 200 is used for batchwise or continuous preliminary and fine comminution of medium-hard to hard-brittle solids (up to 8 Mohs). Thanks to its robust design, it can be used under rough conditions in laboratories and pilot plants, as well as online for the quality control of raw materials.
|
|
Planetary ball mills are characterised by very fast and effective comminution. They have a wide range of applications. Ideal for lossless comminution down to extremely high levels of fineness < 0.1 µm. The grinding can take place dry, in suspension or under inert gas, depending on the application. They are also well suited for mixing and homogenising emulsions and pastes or for mechanical alloying in materials research.
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
|
|
|
The FRITSCH Vibrating Cup Mill for fast sample preparation is found in almost every spectroscopy preparation lab as well as in ore and geology laboratories.
|
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications
|
|
These Sturtevant Sample Grinders are of the "Open Door" disc type construction and are capable of very fine work, producing products as fine as 100 mesh (coarser if desired) when working on dry, friable, soft or moderately hard materials. They also can work on many hard rocks and ores, but with somewhat reduced capacities.
Benefits
* Product fineness adjustable during operation
* Uniform product size assured by spring-loaded grinding discs
* Heavy-duty cast iron construction offers decades of dependable service
* Various grinding discs available
* Easy access to wear areas for inspection and maintenance
|
|
The type of sample preparation depends on the requirements in the analysis to be made. For this reason it is important to select the correct preparation for the analysis in question. Perten Instruments can offer two types of Laboratory Mills, the hammer type mill and the disc type mill.
Disc mills are used when grinding samples for moisture determination, whereas hammer mills are used for most other applications, such as Falling Number, Glutomatic and NIR analysis for example
|
|
The mills of series 2000 have a modular design. Within the construction size the machines are convertible to the inline dispersing machines of series 2000.
Constant speed parameters and generator geometries allow an exact scale-up.
All machines are CIP- resp. SIP-suitable.
Design, materials and surfaces correspond to the recommendations of FDA resp. EHEDG.
There are different grinding tools available.
The drives can be adapted to the respective conditions like flow rate, power requirement, protection type or ex-protection.
|
|
The horizontal disk mills type LME and LMK are improved, continuous working laboratory and production machines for wide variety of applications.
The disk agitator shaft activates the grinding media with high intensity through the entire grinding chamber. Highly efficient separation devices that are adapted to your application are available for separation of product and grinding media. This ensures that the mill is reliably operated with high viscous products as well. Depending on the product-specific requirements, the machine can be designed in different materials (e.g. PU, rubber, ceramics, chilled casting, special steel).
|
|
SRM 4555 Precision Roller-Style Coffee Grinder - Ideal for Gourmet, Laboratory, Pilot Facililty and Plant Applications
The superior grind quality of a roller style coffee grinder at the size and cost of a "disc" style grinder.
Since 1956, Modern Process Equipment has manufactured quality coffee grinding equipment, and the SRM 4555 roller style coffee grinder represents another product innovation from MPE.
The SRM 4555 is the world's smallest roller style coffee grinder producing up to 600 pounds per hour of ground coffee with an extremely uniform particle size. Utilizing the same technology as large "industrial" coffee grinders, the SRM 4555 produces grinds superior in quality to those attainable on disc or plate style
|
|
|
The material to be milled is placed between the feed and center rolls. Each adjacent roll rotates at progressively higher speeds. For example; the feed roll may rotate at 30 rpm, the center roll at 90 rpm and the apron roll at 270 rpm. Material is transferred from the center roll to the apron roll by adhesion. The dispersion is achieved by the shear forces generated between the adjacent rolls. The milled material is removed from the apron roll by a knife that runs against the roll.
|
|
|
Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability.
|
|
|
In combination with a milling system APS the laboratory dissolver DISPERMAT® changes into a closed, discontinuously operating bead mill. The system is simply adapted to the corresponding dissolver via the dissolver shaft or the adapter flange. The DISPERMAT® can be used as a dissolver as well as a bead mill.
|
|
Nano-Bead mill DISPERMAT® SL-nano for milling quantities from 100 ml
The bead mill DISPERMAT® SL-nano is a closed, horizontal operating nano bead mill with a high power input and extremely low clearance volume for for circulation and pass procedure.
A distinguishing mark for the Nano mill is:
* High grinding stock production due to pneumatic press out system
* Extremely small milling beads from 0.1 – 0.3 mm
* C-control with extensive process control
* Data interface for documentation & analyse
* Excellently suitable for research, development and quality assurance
* Compact design and very easy to clean
* High reproducibility of the dispersions
* Scale up: easy transmission from laboratory results to production scale
* Modular design: a modification to larger beads is possible at any time
|
|
Laboratory 2-roll mills
RODOLFO COMERIO laboratory 2-roll mills are suitable to satisfy any mixing, measuring and development requirement of the product arising in the analysis laboratories and research Institues. These machines are designed to combine operational constancy and easiness with simble tests data determination and, furthermore, with control and measurement requirements of the operational parameters. A computer gives the possibility to program and automate the whole mixing process, thus improving the reproducibility of the tests of the whole sequence by means of tests carried out in automatic mode.
|
|
Retsch Cross Beater mills are suitable for batchwise and continuous coarse and fine grinding. Medium-hard and brittle materials with a hardness of up to 6 Mohs can be milled. Retsch Cross Beater Mills are highly versatile: from preparing samples in the laboratory and industrial plants, through pilot installations in technical colleges to making batches in the production.
Product Advantages:
high throughput
high final fineness
versatile in use
easily changeable bottom sieves
wide range of accessories
maintenance-free direct drive
safe design to CE standard
2-year warranty
|
|
Retsch SM 2000 cutting mills are especially high performance and user-friendly machines for crushing tough, medium-hard, soft, elastic, brittle and fibrous materials. Running slowly or quickly with different rotors and hoppers, they crush a wide range of materials, eg:: waste samples, plastic parts, biological substances, food and animal feed and beverage cans. The SM 2000 mills are therefore ideal for research, testing and operational laboratories, for technical training facilities or for creating samples in production.
Further model: SM 100.
Product Advantages:
powerful size reduction, even of heterogeneous mixtures
defined final fineness
low heat build-up
wide range of accessories for universal use
central locking device
fold-back housing
easy cleaning
robust, safe design
2-year warranty, CE-conforming
|
|
|
|
|
|
In foodstuff laboratories, in chemical or biological research institutions - suitable analysis material is required everywhere for precise examination of foodstuffs. With the GRINDOMIX Knife Mill, Retsch now produces a grinding and homogenising machine that fulfills professional laboratory and analysis requirements. It processes foodstuffs with high water, oil or fat contents just as rapidly and reliably as dry, soft or medium-hard products. For the first time, Retsch provides a professional alternative to standard household mixers.
With the special cutting knife system and the variable grinding chamber of the Grindomix, the materials can be processed into an homogeneous analysis sample, quick and easy. Two straight knives at different heights, arranged at right angles to the direction of rotation, turn at a speed between 2,000 and 10,000 rpm in the centre of the mill vessel.
Product Advantages:
powerful speed-controlled 750 W industrial motor
speed pre-selectable, range 2000 - 10000 min-1
digital display of grinding time and speed
interval operation possible
three memory keys
gravity lid for automatic grinding chamber volume adaption
comprehensive range of accessories
sample vessel easy to clean and exchange
|
|
|
|
|
|
Retsch mixer mills MM 400 are particularly suited for dry and wet grinding of small quantities of material. The mills are ideal for mixing and homogenizing powders and suspensions. They are excellently suitable for disrupting biological cells as well as for the isolation of DNA and RNA. The instruments are used in the field agronomy, biology, biotechnology, chemistry, ceramics, glass, medicine, pharmaceuticals, criminology, environment, mineralogy, metallurgy.
Further model: MM 200.
Product Advantages:
quick, efficient pulverization and homogenization
higher sample throughput due to short grinding times and two grinding stations
reproducible results by digital preselection of grinding time and vibrational frequency
large range of grinding jars
safe wet grinding without loss of material with screw-top grinding jars
simple and comfortable operation
memory keys for three parameter combinations
set parameters can be locked against accidental alteration
2-year warranty, CE-conforming
mixes or homogenizees two samples from 0.2 to 20 ml at the same time
processes up to 20 samples simultaneously
|
|
The mortar grinder RM 200 comminutes inorganic and organic substances to analytical fineness. It can mix and homogenize powders, suspensions and pastes. The grinder is also ideal for the uniform trituration of homeopathic and pharmaceutical products.
Product Advantages:
loss-free processing
wet and dry grinding
7 different grinding set materials for contaminationfree grinding
reproducible results by adjustment of the pestle pressure (via a scale) and digital time setting
performance display
closed, dust-tight grinding chamber with windows
high-performance drive with electronic control
easy to operate, easy to clean
safe, CE-conforming design
2 year warranty
|
|
The SR 300 is the leader among the Rotor Beater Mills. Its high speed in comparison to the SR 200 allows a significantly higher throughput. The ground sample also has a larger fraction of fine material. Grinding chamber, feed hopper and material inlet and outlet are completely made from highquality stainless steel.
Product Advantages:
high throughput
high final fineness
versatile in use
easy cleaning
exchangeable grinding and sieve inserts
quick-action door lock and motor brake
safe design to CE standard
2-year warranty
|
|
The new RETSCH Ultra-Centrifugal Mill ZM 200 is used for the rapid reduction in size of soft to mediumhard and fibrous materials. As a result of the effective pulverization technique and the wide range of accessories the ZM 200 ensures the gentle preparation of analytical samples in a very short time.
Product Advantages:
versatile in use due to wide range of accessories
high final fineness
wide speed range, adjustable from 6 000 to 18 000 min-1
considerably increased throughput due to optimally matched frequency converter and 3-phase motor
gentle and very rapid size reduction by 2-step rotor/screen system
quiet and reliable, easy to clean
comfortable parameter setting via display and ergonomic 1-button operation
comfortable safety housing with automatic cover closure
motor compartment and electronics protected against dust and material penetration
2-year warranty, safe design to CE standard
|
|
|
|
|
|
Cutting mills are particularly well suited for comminution of soft to medium-hard, fibrous or tough materials (including plastics). They are frequently also used in the preparation of heterogeneous substance mixtures and for sample preparation for RoHS and WEEE analysis. In this type of mill, samples are comminuted through cutting and shearing. The fineness is determined by a sieve insert.
Various knife geometries and replaceable blades ensure maximum flexibility and durability. Grinding parts of various steel types as well as of hardmetal tungsten carbide can be used for controlling the abrasion problems.
All grinding parts can be removed for cleaning in just a few seconds without tools – unbeatable fast, simple and efficient!
YOUR ADVANTAGES WITH FRITSCH CUTTING MILLS
- Especially simple operation for fast work
- Unmatched ease of cleaning thanks to patented quick opening facility
- Optimum airflow for particularly fast grinding and secure protection against clogging
- More stable running and low wear due to the patented double cone bearing of the rotor
- Exceptionally long service life through use of replaceable and fixed knives
- Unique grinding chamber geometry: minimal dead space and progressive cutting geometry between the rotor and the fixed knives – for faster and simpler operation
- Grinding parts with different cutting geometries and materials - perfectly adjustable to your application
By the way:
FRITSCH Cutting Mills are available in different configurations – for each application the perfect Mill!
|
|
|
The FRITSCH Mortar Grinder is an all purpose mill suitable for a wide range of materials: hard-brittle to soft-wet and the popular choice in the chemical/pharmaceutical area. Its gentle grinding through pressure and friction makes it the ideal mill for grinding tablets in galenics.
|
|
Due to their high grinding energy, the Variable Speed Rotor Mill PULVERISETTE 14 is the best choice for grinding of soft to medium-hard, tough, brittle materials - including plastics and for sample preparation according to RoHS and WEEE (e.g. for detection of hexavalent chromium).
The material is comminuted through impact and friction forces. The final fineness of the samples depends on the selected sieve insert.
To avoid undesired abrasion, the FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 can be equipped with rotors made of stainless steel, titanium or with titanium nitride or tungsten carbide coatings.
|
|
|
|
