|
|
|
|
|
|
The laboratory hotplates and stirrers from SI Analytics demonstrate the kind of creative design that results when practical laboratory experience is paired with the most advanced materials know-how.
Our variety of 4 laboratory hotplates enables speedy heating up (SLK 1, SLK 2), with a temperature control if required (SLK 2-T, SLK 6).
The laboratory stirrer (SLR) is the optimum solution for a careful to intense mixing of liquids. It can also be used for speedy heating up or controlled temperature adaptation.
Both product families have the benefits of the glass ceramic heating surface which as proven in millions of households. Chemical resistance, a high sur face quality, and a resistance to temperature shocks of more than 700 °C provide the user with maximum benefits compared to conventional heating surface materials. The poreless smooth surface enables even most stubborn dirt to be easily removed. The high infrared permeability ensures that the heating energy is transferred quickly and with a low loss rate, i.e. it heats liquids faster than other heating surface materials, and thus saves energy.
|
|
|
|
|
|
Stuart CB/SB162 Hotplate stirrers
Choice of robust aluminium or chemically resistant ceramic tops
Advanced safety features:
- Flashing "Hot" warning light
- Spillproof design
- Independent safety circuit to protect against overheating
Microprocessor control for accurate temperature setting
Stylish and economical general purpose stirrer hotplates designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.
Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.
Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.
Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.
|
|
Extremely flat electronic multipoint magnetic stirrer without moving parts.
For the flexible use in the laboratory.
HMC Cyclone 6
- Electronic multipoint magnetic stirrer with 6 stirring points
- Extremely flat without moving parts
- Microprocessor-controlled
- Elegant design with stainless-steel housing
- 6 synchronically working stirring points, for example 6 x 1 litre Erlenmeyer flasks
- Ideal device for mass screenings
- Speed range 100-1000 rpm
- Hermetically sealed
- Simple operation
- Indestructible
|
|
| ... products without technical information |
| |
|
|
|
|
The newly developed Series MKP-Bio offers you an excellent solution for aseptic applications in the pharmaceutical, biotech, food industry and other sanitary processes. The pump has been developed and designed according to the EHEDG recommendations and takes in to account VDMA 24432 and EN 12462 standards.
Options:
• Internal bearing in tungsten carbide
• Diamond coated internal bearing
• Jacketed casing
• Temperature protection sensor PT-100 (recommended) to protect against dry running
• Double shroud system
• Special frame mounting
• Special O-ring material available on request (Viton®, EPDM, Silicone).
• Different suction - and discharge - connections available (clamp, T-I-Live, flange and buttweld)
Vertically mounted Magnetic Drive Pump with patented drive system.
The pump is totally self-draining through the suction connection eliminating requirement for additional flush drain and vent connections.
Due to the inherent design of the internal bearing lubrication and the gasket construction according to DIN 11864, the pump is deadspace free.
Specially designed flushing in the internal bearing guarantees excellent lubrication and cooling.
All wetted components meet a surface finish of min. 32ra standard, other finishes available on request.
All wetted corners are radiused for complete drainability.
All wetted surfaces are finished with a minimum 3° slope.
Microorganism cannot enter from the atmosphere into the pump.
CIP/SIP - able in place.
Reliable and easy assembly and reassembly.
For assembly and reassembly of the pump there is no special tool required.
All wetted materials are made of FDA approved components.
|
|
IMO OptiLine magnetic coupled pumps, also called mag drive pumps, are an investment in a leak-free future. The benefits are unmatched: a dramatic reduction in maintenance and spare parts costs, improved safety and low environmental impact.
An extension of the low pressure ACE and ACG pump series, the OptiLine design features a sealed-off pump with inner rotor and permanent magnets coupled to the pump, which is then sealed by a non-magnetic can. On the atmospheric side, an outer rotor, also with permanent magnets, is coupled to the driver. With no sliding contact seals, there is no way for oil to escape.
OptiLine covers a flow range up to 70 m3/h. A small fraction of the pumped media is used for cooling of the coupling, so there is no requirement for an external cooling device. Nor is there any need for ventilating openings in the coupling chamber, eliminating wearing debris.
|
|
KRAL pumps with magnetic coupling are hermetically tight, the pump station as well as the site itself stays clean. As magnetic couplings work without wear and maintenance-free, the life cycle costs are favourable comparative to conventional sealing systems.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
Pumped Liquid
Chemically neutral, lubricating, e.g. fuel oils, lubricating oils, hydraulic oils, cutting oils, coolant oils, cutting oils and other lubricating liquids
Main Fields Of Application
Firing, hydraulics, mechanical engineering, general industrial technologies, chemical and petrochemical industries, marine and offshore engineering
|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline fitting and provides environmental protection up to 80°C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They provide up to 2NC 1NO circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
|
|
The Idemag WPR Non Contact Interlock Switch range offers a robust wide fitting and provides environmental protection up to 80C. They are suitable for high pressure hosing (IP66/67) and are resistant to many organic and non organic chemicals.
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, and a high tolerance to guard misalignment.They are designed to fit to medium to large guards.
They offer 2NC high power (up to 2A.) circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1. An auxiliary signalling contact is available. The high power components and de-rating with an internal fuse mean they may be suitable for use in lower risk applications (subject to a risk assessment for the application).
|
|
The Hygiemag WMR Magnetic Non Contact Interlock Switches offer a wide industry robust fitting and provides environmental protection up to 105°C.
The housings are fully Stainless Steel 316 with mirror polished finish and they are designed to cope with the rigours of CIP and SIP cleaning in food processing industries. (IP69K High Pressure Chemical Cleaning).
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, provides up to 2NC 1NO power circuits (up to 2A.) and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
Features:
Fully Stainless Steel 316 housings
Mirror polished finish
High Mechanical Life
IP69K enclosure protection - High Temperature Cleaning
Wide robust fitting - 30mm wide
M12 Flying Lead connector versions
|
|
|
|
|
|
SAFETY CODED MAGNETIC SENSOR, SR series
Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions.
Both series are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
- Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
- Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
- Centering mark on the housing as a reference for the operating distances
- Possibility of connection in series more sensors also with mechanical switches.
- Actuation from two different directions.
- Available with cable or M8 integrated connector.
- Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit the web-site www.pizzato.com
|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline fitting and provides environmental protection up to 80°C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They provide up to 2NC 1NO circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
|
|
The Idemag WPR Non Contact Interlock Switch range offers a robust wide fitting and provides environmental protection up to 80C. They are suitable for high pressure hosing (IP66/67) and are resistant to many organic and non organic chemicals.
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, and a high tolerance to guard misalignment.They are designed to fit to medium to large guards.
They offer 2NC high power (up to 2A.) circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1. An auxiliary signalling contact is available. The high power components and de-rating with an internal fuse mean they may be suitable for use in lower risk applications (subject to a risk assessment for the application).
|
|
The Hygiemag WMR Magnetic Non Contact Interlock Switches offer a wide industry robust fitting and provides environmental protection up to 105°C.
The housings are fully Stainless Steel 316 with mirror polished finish and they are designed to cope with the rigours of CIP and SIP cleaning in food processing industries. (IP69K High Pressure Chemical Cleaning).
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, provides up to 2NC 1NO power circuits (up to 2A.) and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
Features:
Fully Stainless Steel 316 housings
Mirror polished finish
High Mechanical Life
IP69K enclosure protection - High Temperature Cleaning
Wide robust fitting - 30mm wide
M12 Flying Lead connector versions
|
|
|
|
|
|
SAFETY CODED MAGNETIC SENSOR, SR series
Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions.
Both series are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
- Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
- Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
- Centering mark on the housing as a reference for the operating distances
- Possibility of connection in series more sensors also with mechanical switches.
- Actuation from two different directions.
- Available with cable or M8 integrated connector.
- Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit the web-site www.pizzato.com
|
|
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Corken SC-Series pumps are a rotary side channel design. They produce a maximum differential head of 1,150 ft (350 m). The side channel pump is offered in six different sizes, each ranging from one to eight stages. This provides for a wide range of pressures and capacities ranging from 1gpm to 185 gpm (3.8–700 L/min). These pumps can handle discharge pressures up to 580 psig (40 bar).
* Magnetic Drive (shown)
* Stainless steel construction
* Double seal option
* High Temperature options
* Bronze or steel impellers
* DIN spec or ANSI drilled flanges
Versatility
Corken's SC Series pumps have provided solutions for a good number of problematic applications over the past 6 years. The capability of this pump to handle NPSH (Net Positive Suction Head) as low as 1 ft coupled with its ability to pump liquids with high vapor content have made it particularly attractive to many of our customers.
|
|
| ... products without technical information |
| |
Permanent electro-magnetic clamping of moulds on injection mould presses adapted to all sizes and shapes of mould.
STÄUBLI offers a complete range of products serving the PLASTICS INDUSTRY including:
- quick mould clamping,
- quick connection of services using quick-release couplings and multi-couplings,
- automatic ejector hook-up,
suitable for all methods of mould changing: vertical or horizontal loading and existing or new machines.
|
|
|
|
|
|
Quad-Press: A magnetically clamped mold is subject to neither deformations nor to inner tensions.
The force is distributed uniformly throughout the contact area, instead of only being applied on the external edges of the base-plate, as it happens when traditional clamping methods are used.
The quality of the molded part is constant in time.
Each 80HC square pole generates a constant, predictable and concentrated force of 1000 kg.
This force improves the performances to an unbeatable level, giving a greater available force in a smaller contact area.
Lead time is strongly reduced; now the SMED production is a reality.
Moulds of any size, even bigger than the machine plates are easily clamped with no modification.
Quad-Press is maintenance free, due to it doesn't present any mechanical component inside.
The new IPC system is available on request with the touch-screen device.
IPC follows step-by-step the machine operator during mold change procedure and give in real-time the actual clamping force generated on the mold.
|
|
|
|
|
|
HotMAG
permanent electro magnetic system for quick clamping of high temperature moulds.
The new permanent electro magnetic system HotMag is the final answer to all the needs to make quick change operations on press machines working with high temperature moulds.
The innovative magnetic circuit, made of special solenoids and high energy permanent magnets, allows to
operate with temperature up to 250° C. (482 ‘F).
The full metallic surface allows the perfect stability and uniformity of clamping all over the contact area
granting high performances in the long run.
Quick: Few seconds only to activate and deactivate the system. Simply pushing a button!
Ergonomic: The operator that can remain always at a distance from the mould. No risk!
Easy and practical: No modification to the machine, no modification to the moulds and no special tools are required.
Time saving: The mould can be preheated outside the machine with a great advantages!
Safe: Only the high strength generated by the permanent magnets will hold the mould at indefinite period of time.
Convenient: The low investment and the high efficiency grants a quick pay back.
|
|
|
|
|
|
AGIMAG - Magnetically driven agitation - for ultimate leak tightness
Designed to be cleaned and sterilized (in place or in autoclave) and build with FDA components, the AGIMAG® agitators from MIXEL are optimized for all the pharmaceutical, cosmetics and food processing.
INDUSTRIES CONCERNED
Pharmaceuticals, food processing,
light chemicals, cosmetics
APPLICATIONS
* storage
* mixing low viscosity products
* fermentation
PERFORMANCE
From 10 litres to 10,000 litres (enquire for higher
capacities)
High pressure (up to 16 bar)
Up to 150°C
FDA approved MATERIALS
316 L stainless steel polished to Ra < 0.2µm electrolytic
polishing
Bearing blocks made from silicon carbide with no free
silica (other configurations please enquire)
POWER
0.18 to 2.2kW
Transmission by magnetic coupling
MAJOR INNOVATIONS
- tachometer built into agitation head (cleanness,
control, safety by instant stopping of drive)
- clutch device for the magnetic coupling
(maintenance operations made easier)
- compliant with EHEDG cleanability criteria.
|
|
| ... products without technical information |
| |
|
|
|
|
Magnetic clamping technology, magnetic clamping plate, especially designed for injection moulding machines, rubber processing machines, die casting machines and presses for various types of metal forming. Stable from 80°C up to 240°C. Dies and moulds, even if not standardised, can be easily and swiftly changed. Evenly distributed clamping force all over the clamping surface ensures clamping almost without distortion, which means higher product quality and less tool wear, reduced downtimes and set-up costs and hence increased productivity.
The "M-TECS" product line embodies magnetic clamping technology, means quick clamping at highest level and offers the user substantial benefits:
• moulds, even not standardised, can be easily and swiftly changed without need for retooling
• the evenly distributed clamping force all over the clamping surface ensures low-distortion clamping, which results in higher product quality and reduced tool wear
• the evenly distributed magnetic force all over the clamping surface ensures optimum contact between the mould and the magnetic heating plate
• lower cost of maintenance and repair is the logical consequence
• no downtime for heating up or cooling down in the press
• shorter stay in the hot area, less burning
• no T-slot between the heating plate and the mould
• more homogeneous temperatures inside the mould
• reduced downtimes, less set-up costs, thus more productivity
• reduced set-up times allow small batches to be processed
|
|
Quick Mould Change magnetic chucks for High Temperature presses
WALKER BRAILLON MAGNETICS offers on-request clamping solutions for every High Temperature application.
Plastic Injection & Compression (Rubber, Silicon) or metal Aluminium, Zamac, Magnesium).
- Quick mould and dies change
- Flexibility and universality: application for any size of mould, no standardization of the mould back plates required
- Compatibility with all types of machines
- Service temperature : up to 250°C
- Important holding force
- Possiblity of integration of any type of heating system : rods, heating fluid, cables etc..
- Utilization without human intervention
|
|
Magnetic roll
Materials: HF 28/15, soft iron, brass
Temperature: maximum 200°C
Execution: Magnet raw, zinc coated iron magnetised
|
|
Several types of magnetic rollers for can conveying systems are produced by Walker Magnetics
rollers for single transport
As part of our mass conveying program, we produce magnetic wide size rollers in any width. Rollers of 2500mm long are in regular production.
magnetic plates
All our rollers are built to complement our magnetic plates,
thus ensuring a good flow.
This range covers most of the requirements for modern can handling. For special applications, we produce tailor-made rollers, plates and curves according to customer's requirements.
|
|
|
|