|
|
| Agilent Technologies is the leader in commercial microfluidic Lab-on-a-Chip technology. This technology utilizes a network of channels and wells that are etched onto glass or polymer chips to build mini-labs. Pressure or electrokinetic forces move pico liter volumes in finely controlled manner through the channels. Lab-on-a-Chip enables sample handling, mixing, dilution, electrophoresis and chromatographic separation, staining and detection on single integrated systems. The main advantages of Lab-on-a-Chip are ease-of-use, speed of analysis, low sample and reagent consumption and high reproducibility due to standardization and automation. |
|
From the world's foremost microfluidic supplier comes a powerful new molecular diagnostics tool for DNA amplification and analysis. ST's In-Check lab-on-chip brings the exponential power of the Polymerase Chain Reaction (PCR) into a cost effective and convenient format.
Clinicians no longer need to compromise between sensitivity, specificity and speed.
The In-Check platform is based on a silicon chip that integrates all the functions needed to identify given oligonucleotide sequences in a sample, including microfluidic handling, a miniaturized PCR reactor and a custom microarray. The chip is mounted on a 1"x3" plastic slide that provides the necessary mechanical, thermal, electrical and fluidic connections. |
|
| ... products without technical information |
| |
... see all the products in the category
Labware
|
Pressure die-casting is mostly used when it is necessary to include special geometries for joints, integrated spacers, handles and details for assembling, sophisticated containers, heat sinks with circular fins.
Die-cast products can be finished with:
- Polishing;
- Painting;
- Anodization;
- Chromate treatment (transparent and gold).
As for prototypes and/or little series it is possible to use pressure sand die-casting or with lost wax, prior of producing the final steel die. |
|
Description:
Provided with the base unit are two filler metering systems, one resin metering system, one catalyst metering system, one base-color metering system and a two color contrast injector system. Additional raw material
systems can be supplied as needed.
The base Autocaster Ultra™continuous casting machine also includes:
· Up to 60 lbs/minute matrix production.
· Recipe based matrix control (100 recipes in control panel) with on-the-fly recipe changes and adjustments for resin %,
catalyst %, base-color and matrix output.
· Totalizer for all raw materials (except contrast color).
· Operator calibrated gear pumps for resin, catalyst and base colors.
· Operator calibrated solid-core filler metering augers.
· Filler hoppers with integrated anti-bridging devices.
· Integrated resin heating system.
· Adjustable flow contrast color injectors (up to eight units).
· High efficiency hardened steel machined mixing auger and barrel.
· Modular base-color systems with expandable base-color pump and recirculation.
· Inverter controlled motors for all raw materials (except contrast color). |
|
Chip inductor coil winding machine
NCI-0150 / NCI-0250
Core supply, winding, welding and core unload are proceeded by indexer simultaneously to shorten the cycle time.
Machine is designed for minimized floor space and less heavy weight.
Indexer is operated by direct drive motor for no maintenance needed.
Stabilize the welding temperature by NITTOKU original auto tuning system.
Special inductor winding machine
This machine is high performance winding machine controlled by 12-axes and possible to wind several spec inductors.
Cross winding is possible for transponder coils.
Type of welding process is selectable. |
|
| ... products without technical information |
| |
The concept of American Maplan's co-extrusion block permits the production of reduced weight foam core pipes or pipes with a compact middle layer of recycled material.
The pipe is generally formed using our PVC spider die technology. The special design of the extrusion blocks will allow either one or two co-extruders to provide up to three materials in the same pipe product.
|
|
Dies for profile extrusion designed to precisely manufacture your products
In close co-operation with its strategic partners, American Maplan offers a complete range of profile dies for window, foam and co-extrusion
Easy installation, handling, adjustment and disassembly for short set-up times and high productivity
Dual-strand dies allow for production of main and auxilliary profiles with maximum efficiency and flexibility
Block dies for large profiles are also available
|
|
| ... products without technical information |
| |
| The press is used for splitting adjusting, maintenance and try-out operations on dies and molds (thermoplastics, die casting, thermosetting, rubber and blanking) and it is possible to inject special waxes, at low pressure, into the mold. |
|
Our electronic mold spotting try-out presses are innovative and unique. Appreciated world-wide for their high quality and precision, they continue to provide maximum reliability years after purchase. Consistently the Millutensil presses offer outstanding advantages to all die and mold manufacturers.
ADVANTAGES:
- Quality dies and molds are produced quickly
- Fast checking, adjustment and die and mold injection testing
- Remarkable savings in labour costs
- Easy to use; error proof operation
- Movements can be repeated with absolute precision
- The upper half of the die or mold can be rotaded 100° or 180° (option)
- The lower half of the die or mold can be shifted and turned 70° to either the left or the right.
|
|
| ... products without technical information |
| |
|
... see all the products in the category
Presses
|
| ... products without technical information |
| |
Specification:
Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch mild steel, aluminum, fiberglass and plastic. Hole Sizes/Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. Pg Sizes: European standard pipe sizes. ISO Sizes: International Standards Organization pipe sizes. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.
Description:
- Round Standard Metal Punch Units are complete units consisting of punch, die and draw stud.
- Use with battery-powered, hydraulic, ratchet or manual drivers.
- Properly assembled through pilot holes, they will make clean, fast and accurate holes. |
|
|
|
see the results for the following category
