|
|
| Distributed Feedback (DFB) Diode Lasers are fixed wavelength single mode diode lasers. Typical geometrical sizes of the laser chip are 1000µm x 500µm x 200µm (length x width x height). The laser chip is grown by MOVPE of compound semiconductor material. The optical gain is provided by double heterostructure which include several Quantum Wells for electronic confinement. Typcal emitter width range between 3µm and 7µm. The single mode emission is enforced by a Bragg grating with the laser chip. The surfaces of the laser chip act as cavity mirrors due to the difference of the refractive index of the laser material and the surrounding air. The rear facet of the laser chip is provided with a high reflection coating. The front facet of the laser chip is provided with a high quality antireflection coating for avoiding the Fabry Perot modes of the laser chip. Distributed Feedback (DFB) Diode Lasers are available at almost any wavelength between 760nm and 2800nm. |
|
BC4 series diode laser beam combiners can combine up to four laser diodes with similar (at least two different wavelengths with 50 nm spacing) or disimilar wavelengths (at least 50 nm spacing) .
Photo monitor of the combined power output is an optional addition.
The standard package features an SMA receptacle for multimode fiber coupling. The combiners can accept both 5.6 mm and 9.0 mm TO packages. |
|
| The Pilot PC is benchtop, highly precise, low noise, microprocessor operated, controller for laser diodes. The laser current or the optical output power and the temperature of the connected laser diode can be precisely regulated. For automated control, a GPIB / IEEE 488.2, a RS232 and a USB computer interface allows remote programming and readout from most computers |
|
-High stability, low noise output
-Dual output ranges on most models
-Constant current and constant power operating modes
-Multiple laser protection features
-Up to 15V compliance available with 4-Wire voltage measurement on select models
-Pulsed and CW modes
|
|
| The OP250 is a configurable stabilized light source with a variety of Lasers and LEDs. Available in a single port or dual port configuration, selectable wavelengths, and various power levels and industry standard optical interfaces this instrument offers all the features and functions necessary for the development, testing and inspecting of optical components and cables. |
|
Flat-Top2:
StockerYale's Flat-Top˛ Generator is a laser beam shaping module that converts a Gaussian beam into a focused, collimated, or diverging flat-top profile. This innovative product can maintain a high degree of uniformity, power, and intensity over large distances.
The Flat-Top˛ Generator is compatible with lasers that emit at UV, visible and near-IR wavelengths. The module can be easily integrated with our world-renowned Lasiris™ lasers, as well as other laser types, both standard and fiber-coupled. |
|
| The Pilot OEM is an industrial grade, highly precise, low noise, microprocessor operated controller for laser diodes, especially designed for rough enviroments. The laser current or the optical output power and the temperature of the connected laser diode can be precisely regulated. For automated control a RS232 computer interface allows remote programming and readout from most computers. Several security concepts are implemented: Slow Start, Interlock, Compliance Voltage Protection, Passive Polarity Protection by separated current lines. |
|
| ... products without technical information |
| |
| As automated processes are increasing in number and steadily being integrated into new industrial areas, the requirements for industrial sensors are also increasing. Special attention lies on quality, reliability and availability. Our industrial-use sensors are designed to allow easy integrability, but also to provide a maximum in productivity. Equipped with standard interfaces, they may conveniently be integrated into manufacturing lines or host systems. |
|
OPTODYNE'S MCV-2002 Linear and Angular Machine
Calibration Instrument calibrates CNC machine tools, CMM's
(Coordinate Measuring Machines), and other precision
measurement machines and stages. Angular, straightness and
flatness measurements can be made "onthe-fly". The unique dual
beam design provides a rapid means to measure the surface
flatness of surface plates, optical tables, machine tools, and
bearing guides.
OPTODYNE'S machine calibration instruments are based on
our proprietary and patented Laser Doppler Displacement
Meter (LDDMTM) technology. The total system is compact
providing easy, convenient storage and transporting. Easy set-up
procedures reduce overall machine calibration time, especially
where multiple axes are involved. This, coupled with a modest
initial investment, provides continual savings.
The MCV-2002 dual beam system design provides the user a
simple, easy-to-operate angular and linear capability in a single
instrument. It is like "having two interferometers in one". One
beam collects the angular data while the other beam monitors the
linear position. The user friendly software, running on a laptop
or notebook computer, collects and analyzes this data. The data
can then be displayed on screen or printed in tabular or graphic
form. |
|
Characteristics
Position sensing (also of moving targets) up to a distance of 240 m. With reflector.
Type LE-200
Measuring range 0,2 - 240 m
Resolution (max.) programmable 0,7 mm
Accuracy (typ.) +/- 2 mm
Reproducibility (max.) /- 2 mm
Characteristics
Position sensing of quasi-static targets without reflector up to a distance of 65 m, with reflector up to 500 m
Type LLB-60 D
Measuring range
0,05 - 65 m without reflector
0,05 - 500 m with reflector
Resolution (max.) programmable 0,1 mm
Accuracy (typ.) /- 1,5 mm or /- 3,0 mm according to device type |
|
The Photon Laser Module is a self-contained module designed as a complete laser diode solution for OEM use. Applications include industrial alignment, machine vision, measurement & positioning, medical fluorescence and bar code readers.
Wavelengths range from 635nm-830nm, with an elliptical output beam and powers from 0.9mW to 85mW. The laser modules can be supplied with various coloured sleeves to assist in wavelength and power identification. Other wavelengths and power options are available - please contact our sales department to discuss your requirements.
The customer-adjustable lens for collimated or focused beam may be replaced by other optical systems such as line and cross generators.
The laser module consists of an anodised aluminium housing, laser diode, drive circuit and collimating lens, either cylindrical or with a 25mm mounting flange. Mechanical dimensions are 12 mm diameter x 43mm length and all standard Photon Module options are available. Electrical connections are made via external flying leads. |
|
T-MFL Lasers:
StockerYale’s Lasiris™ T-MFL lasers produce long telecentric lines as thin as 9.0 µm at 1/e2 at a specified working distance and are designed for applications where utmost accuracy and precision are required.
This technology benefits applications such as inspection of microelectronics, solar cell inspection, high resolution 3-D contour mapping and other machine vision systems.
Lasiris T-MFL lasers use refractive uniform line generator optics without beam clipping.
- Line width remains constant along line length
- Extremely thin lines down to 9.0 µm at 1/e2
- Line length up to 60 mm
- ESD, over-temperature, over-voltage and reverse-polarity protection
- Two year warranty
Applications:
Precision inspection of small parts (chips, wafers, small pins, resistors, semiconductor components)
Solar cell inspection
High precision surface analysis
Machine vision
3-D contour mapping
Industrial inspection
Bio-detection |
|
Laser diode of alignment for industrial use, uasn in many applications that need the aligned one precision to cut, positioned of precision to mark, to make holes, to make borders...
Applications and sectors type:
- aligned marble pieces in cutting machines
- aligned tables or trunks in the sector of the wood
- aligned fabrics, botenes, pockets... in the textile sector
- aligned planxas or blocks in iron and steel industry
- aligned tables and leaves in premsas
- To aim positioned in cranes
- ecc ............
The comfort of this system is in seeing early where the requested work will be developed, then the work will be faster and with less errors.
Laser Rasnel produces lasers for 20 years and we can count between our European clients more than 100 constructors of machinery for the industry. |
|
The 300-0600-00 series of Thermo-Electrically Cooled, (TEC), red and infrared laser diode modules offers exceptional wavelength and power stability, (better than 1%), good pointing accuracy and significantly increased laser diode lifetime.
Designed for applications demanding consistency and repeatability such as machine vision, alignment, industrial inspection, high-resolution printing, biomedical instrumentation, spectroscopy, microscopy and genomics, the TEC laser modules are compact, versatile and highly cost effective.
The laser module produces a circular output beam and output powers of 0.9mW to 32mW at 635nm, 25mW at 690nm, 55mW at 785nm and 24mW to 120mW at 830nm.
We can fit almost any laser diode in a 9mm or 5.6mm package into our TEC laser modules. If you need a wavelength or power that we do not offer as standard, please contact our sales team to discuss your requirements. |
|
Powerline lasers:
StockerYale’s Lasiris™ PowerLine structured light laser is a line generator developed for demanding industrial machine vision and scientific applications. Bridging the power gap between the popular SNF and Magnum series lasers, this thermoelectrically cooled device is able to emit uniform laser lines at high powers, up to 1 W at 810 nm and 500 mW at 670 nm.
With exceptional beam pointing and focusing stabilities, the PowerLine laser can be operated in extreme environments ranging from -20°C to +55°C. The laser beam can be modulated by an external signal through a DB-9 connector on the back panel and all models can operate in either CW or external modulation mode. The laser is protected against over-voltage, reverse polarity of the power supply, over-temperature, and ESD. |
|
| Coherent's Laser Diode Modules combine the technology of the diode laser with quality optics, sophisticated electronics and rugged modular packaging to provide a reliable laser source suitable to a variety of application needs. |
|
Features:
- Uncooled operation at 1310 nm
- MSA compliant XMD (10 Gbit/s Miniature Device)
- Field-proven high reliability
Applications:
- OC-48 and STM-16 (2.5 Gbit/s), OC-192 and STM-64 (10Gbit/s) trans-mission systems
- Long haul and Metropolitan DWDM systems
- Small form Transponders and Transceivers |
|
| New Source Technology can provide you with a variety of Laser modules, which are offered for use as a building block "engine" in the development or production of rod laser systems, or as a drop-in replacement for arc lamp pump chambers in industrial lasers. They are well suited for applications such as laser marking, materials processing, and scientific research. |
|
| Silver Bullet diode laser sub assemblies (ASMs) are offered with optional soldering kits. CEO® can also attach Silver Bullets to customer-supplied heat exchangers to make completely packaged laser diode arrays. Extreme care should be taken when handling these components. We recommend that they be only used by customers who are experienced in the handling and packaging of laser diode bars. |
|
| ... products without technical information |
| |
|
|
