|
|
| Our lensed fiber is processed with accuracy. The end face is crafted and polished into many kinds of micro-lens with different optical performance. Its application is mainly applied to active component output and input coupling, excellent coupling efficiency, simple and convenient to use, make Chuxing your number one choice when using lensed fiber. |
|
| Optical Fiber Cables are designed to guarantee the integrity of data transmission through the optical fibers in the cable by protecting the Optical Fibers against mechanical stress during the life of the cable. In order to do so, a peripheral reinforcement of man-made fibers like Twaron® and Technora®, is necessary. In addition to protection, other demands on the cable can be made like non-conductivity, weight or diameter limitations, and specifications concerning flexibility and handling. |
|
In the 1990’s Fiberguide developed 2-dimensional arrays of single mode fibers to meet extraordinarily demanding specifications of Lucent Technologies’ Bell Laboratories. They needed the centerlines of 361 fibers in a 19 x 19
array to be positioned to an absolute accuracy of ± 2.0 microns over the entire array. This required a positioning accuracy beyond that possible with conventional machining methods. The solution developed and patented by the technical staff at Fiberguide is to use an alignment plate with holes
in it to guide the fibers into position. The plate is made from a wafer of silicon and the position of each hole is established by the same photolithographic and etching methods that are used to make electronic integrated circuits. |
|
| The ASM series (Advanced Signal Multi-scanner) offer a great time-saving automatic solution to calibrate multiple temperature sensors at the same time. The ASM series is an eight channel scanner controlled by JOFRACAL software on a PC. Up to 3 ASM units can be stacked to calibrate up to 24 sensors at the same time. It can handle signals from 2-, 3- and 4 wire RTD’s, TC’s, transmitters, thermisters, temperature switches and voltage. |
|
Description
The Optical switch 1x8 is a compact and low-cost device which provides easy setup and extension of the measurement network. The optical switch has 1 input channel and 8 output channels. The switch is software controlled using RS 232 connection and does not require any other external power supply.
The Optical switch 1X8 product family was specifically designed to meet the diverse needs and challenging requirements of the fibre optic sensor community. The speed, low loss budget and repeatability make it excellent for optical sensing applications.
Features
- 8 optical channels
- Fast switching time
- RS 232 connector
- 5V power is required
Applications
- Pipeline Stress Monitoring
- Offshore Oil Platform Riser Stress Monitoring
- Oil well Temperature and Pressure Monitoring
- High-Tension Line Temperature Monitoring
- Geotextile Strain Monitoring
- Security / Defense Fence Monitoring
- Civil Structure Stress and Strain Monitoring
- General purpose Optical Spectrum Analysis |
|
MRV provides several families of Ethernet, IP and MPLS Switching and Routing solutions, including both chassis-based systems accepting interface modules, and fixed-form switches and routers.
The OptiSwitch product line is designed to meet the needs of high-density fiber optic switching applications. With a variety of chassis styles and over ninety modules, the OptiSwitch family provides an exceptional level of versatility. It supports both high-end switching and IP routing functionality and is ideal for broadband data communication service.
The OptiSwitch-M provides a wire speed IP/MPLS routing solution and subscriber management platform, without sacrificing any of the features required to build a scalable network. This is achieved by using a powerful hardware engine with network processors implemented on every port. These custom programmable processors are highly efficient and capable of analyzing and modifying any part of a frame at wire speeds. Additionally, the network processor can classify and prioritize each frame and enable per flow decisions such as: scheduling, routing, forwarding, rate limiting, and filtering. The OptiSwitch-M family has both modular products, and fixed form products. |
|
| The FAC 1000/2000 is a multiplexer oriented to multi-point communication with several devices using fiber optic. It provides one or two inputs and multiple outputs. |
|
The Lambda Driver series consists of multi-functional, compact and modular CWDM/DWDM systems specifically designed for metropolitan service providers and enterprises requiring a flexible, cost-effective system to multiplex, transport and switch high-speed data, storage, video and voice applications. The LD systems can create up to 64 independent virtual fiber links over a single pair of fibers over distances of up to 100km. The system supports different network topologies such as Point-to-Point, Star, Linear Optical Add/Drop Mux and Ring. Service providers and Enterprise customers deploy the LD systems to maximize the bandwidth and service flexibility of their networks.
LD1600 chassis can host 16 transponders plus OADMs, Muxes/Dmuxes, 1+1 redundancy, service and 2 management modules (for redundancy).
The LD800 chassis can host 11 transponders, OADMs, Mux/Dmux, 1+1 redundancy, service module and 1 management module.
The LD400 chassis can host 5 transponders, OADMs, Mux/Dmux, 1+1 redundancy, service module and 1 management module. |
|
The Lambda Driver series consists of multi-functional, compact and modular CWDM/DWDM systems specifically designed for metropolitan service providers and enterprises requiring a flexible, cost-effective system to multiplex, transport and switch high-speed data, storage, video and voice applications. The LD systems can create up to 64 independent virtual fiber links over a single pair of fibers over distances of up to 100km. The system supports different network topologies such as Point-to-Point, Star, Linear Optical Add/Drop Mux and Ring. Service providers and Enterprise customers deploy the LD systems to maximize the bandwidth and service flexibility of their networks.
LD1600 chassis can host 16 transponders plus OADMs, Muxes/Dmuxes, 1+1 redundancy, service and 2 management modules (for redundancy).
The LD800 chassis can host 11 transponders, OADMs, Mux/Dmux, 1+1 redundancy, service module and 1 management module.
The LD400 chassis can host 5 transponders, OADMs, Mux/Dmux, 1+1 redundancy, service module and 1 management module. |
|
MRV provides several fiber-optic multiplexer products, which combine several streams of data onto a single fiber:
FiberDriver Modular, Managed Transport Solutions
E1/T1 Multiplexers
E1/T1 and Ethernet Multiplexers
FiberDrver-MM Unmanaged Standalone Solutions
E1/T1 Multiplexers
|
|
MRV's eWDM systems provide a simple, efficient, flexible and cost effective solution for deploying Gigabit Ethernet services in Campus, Metropolitan area access networks, highways, the transportation industry and Cable TV MSOs.
The Ethernet WDM (eWDM) solution's building blocks are:
OptiSwitch WDM
pluggable module with WDM SFP
LDP300 All Optics Chassis (passive)
CWDM Optical Add-Drop Multiplexers (OADMs)
Easy Deployment and flexible implementation:
Passive Optical Solution
No-power required
No configuration needed
Can work with standard LD family OADM/MUX modules
Interfaces directly to WDM (SFP/GBIC) pluggable optics
High availability and redundancy protection:
OADM: O-BPSR and O-UPSR for system and fiber cut protection
OptiSwitch GER module for fiber signal redundancy
Protocol (RSTP, MPLS) redundancy
Investment protection: |
|
Multiplexers 4 to 16 synchronous or asynchronous lines RS232 on fiberoptics.
Presentation in rack 19 "
Interfaces RS232 Taken subD 9 pins, fiberoptic ST or SMA.
Range 2.6km minimum on a fiber 50/125.
Adaptable and modifiable easily with a particular need.
|
|
Combine a 100Mb Fibre Media Converter and a 2-port 10/100 copper Switch. Add in fibre port choices for all multi-mode and single-mode fibre connector types plus AC or DC input power selection and multiple application environments, and you have a new flexible edge-of-the-network Ethernet product: the CS14 Converter Switch. The compact package is ideal for network edge installations, and is able to be conveniently mounted to suit any application.
The CS14 regular-package units are for office and indoor wiring closet environments. The ambient temperature rating is 0ºC to 40ºC. A robust metal case with convection cooling is featured. Metal mouting clips are included, and rack-mounted tray options are available.
The CS14H hardened units are for factory floor applications. The ambient temperature rating is for industrial use. No internal air flow is required for cooling, so it resists dust, dirt, moisture, smoke and insects. Mounting option include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
The CS14P Premium-rated units are for temperature uncontrolled sheltered applications. Mounting options include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
Please visit our website for the full product information. |
|
For any user who needs a 10Mb fibre link connected to one ot two 10/100 copper devices, the "go anywhere" CSN14 Converter Switch is a versatile and handy solution.
The CSN14 family of Converter Switches, with a 10Mb Fibre port built-in covers the full range of application environments with regular (office), hardened (factory floor), and Premium-rated (outdoor) versions.
The CSN14 regular-package units are for office and indoor wiring closet environments. An external AC power supply for either North America (-d, 115vac 60Hz) or international (-i, 230vac, 50Hz) is included. The ambient temperature rating is 0º to 40ºC. It is convection cooled. Metal mounting clips are included, and rack-mount tray options are available.
The CSN14 Hardened units are for factory floor applications. It resists dust, sirt, moisture, smoke and insects. Mounting options include stand-alone panel mounting, DIN-rail, or rack-mount tray.
The CSN14 Premium-rated units are for temperature uncontrolled applications. In addition to a Premium-rated AC power option and jack, terminals for internal DC power choices at 8 to 15V, 24V or -48V DC are included. Mounting options include stand-alone panel-mounting, DIN-rail, or rack-mount tray.
Please visit our website for full product specifications. |
|
The JetCon 3401G, the industrial Gigabit Ethernet media converter, is equipped with a rugged aluminum alloy case with IP-31 grade ingress protection against
damages of solid objects or dust. With the excellent characteristics of heat dissipation, JetCon 3401G is capable to perform better than ordinary Gigabit Ethernet media converters which are enclosure by steel metal with various of heat dissipation holes.
Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a real Industrial Gigabit Ethernet Media Converter with the non-stop transmission.
*Converts 10/100/1000TX to Gigabit Fiber
*Flexible SFP Fiber transceiver design
*Auto Fault Detection and Alarm
*Fault Alert for port and power
*Two way Link loss forwarding
*Power redundancy with wide range input
*IP-31 grade protection with wide range operating temperature
*1.5KV Hi-Pot testing passed |
|
| ... products without technical information |
| |
|
|
see the results for the following category
