|
|
|
Ideal for material recovery facilities wishing to automate removal of aluminum beverage cans from commingled recyclables. Available in feed widths of 24, 36 and 48 inches (610, 914 and 1220 mm).
|
|
High intensity magnetic separators for optimum separation of paramagnetic particles from dry products
Key areas of application: to remove paramagnetic minerals; to separate fine irons from ceramic raw materials and spray dried ceramics, to eliminate fine iron contamination in granulated plastics / plastic beads in the plastics recycling industry
Most comprehensive selection: diameters of 75mm, 100mm and 300mm in a variety of widths
|
|
HIGH-INTENSITY SEPARATOR
This magnetic separator is so powerful that it can separate all paramagnetic and slightly magnetized materials from non-magnetic materials. Stainless steel that is processed through a shredder has these lightly magnetized properties and can be separated like this. This high-intensity separator is also employed for the removal of very small Fe particles from ceramic powders.
Removal of all weak magnetic particles, stainless steel, iron or nickel-bound raw materials
Continuous automatic cleaning
Suitable for the removal of particles from 50 mhu upwards in the recycling and ceramics industry
Suitable for belt-widths up to 2000 mm
Supply voltage essential
|
|
Permanent magnetic separators used for the automatic separation of ferrous metals and stainless steel
Ferrite models remove tramp and fine iron from dry bulk materials and Rare Earth models with 25 times the field strength of conventional ferrite magnets are able to separate very fine irons from both dry bulk materials/powders and slurries.
Key features: versatile, low maintenance, self-cleaning, choice of drum widths, custom-design
|
|
|
We produce custom designed and built separators for all industrial applications. We can give engineering and magnetic advice on separators.
|
|
The most common use of magnets in the plastic industry is magnetic separators.
Main applications:
Traps metals before they reach the extruder
Filters metals from raw material.
|
|
Magma is the only magnet manufacturer in Israel that provides magnetic solutions for all types of industries.
Following a cooperative venture initiated between Magma and A.B Pro Ltd, it is now possible to meet the varying magnetic needs of even the most complex mechanical engineering project designs.
Magma offers assistance in various ways, from finding solutions starting as early as the initial design stages, determining magnetic needs and properties, prototype development, to full-scale production of the finished product.
Magma operates a state of the art QA laboratory and supplies a wide variety of magnetization services, magnetism assessment and analysis.
A unique division within Magma offers engineering development and design solutions, integrating the company's physical and engineering capabilities to provide a comprehensive solution in the field of planning and magnetization.
Magma specializes in renovating, renewing and upgrading existing systems.
Magma also maintains a department specially equipped and staffed to design and manufacture magnetic separators and all types of lifting equipment, e.g. magnetic drums, candles and plates as well as magnetic and integrated conveyors.
|
|
4B offers a large range of magnetic separators for both agricultural and industrial environments.
These products have been designed for the purpose of filtering and decontaminating the products that flow through / past them and to protect the machines from destructive metallic objects.
They are available in different forms: rods, strip magnets, drum magnets, grids, etc..single or double-housed and with different strengths, up to 11000 gauss.
They allow to extract ferrous and stainless steel contaminants which result from the mechanical usage of the machinery.
|
|
|
Goudsmit magnetic systems ensure a consistently high product quality and an uninterrupted production process. This is very important with regard to increasing quality demands in (e.g.) the foodstuffs and chemical industry. Magnetic systems also prevent damage to expensive machinery and assure you of a metal free end product
|
|
Metal shavings, nuts, pins, nails, can sometimes contaminate the raw material. For this reason, we have created a whole programme of ferric particles detection systems, designed for protecting grinders and getting rid of iron particles in manufacturing process. There is a wide variety of applications. The main ones are used in the tinned food sector, ceramics and tiles, chemical industry, mining, the pharmaceutical industry, recycling, etc…
These systems, separators, filter bars, drums, etc..., may be produced in different magnet qualities, depending on the degree of ferrous particles chosen.
|
|
Metso Minerals (as Sala Maskinfabrik AB, later Sala International AB) has a long tradition in magnetic separation. Already in the end of th 19th century "Sala" built the first magnetic separators.
Metso Minerals LIMS - dry and wet low intensity magnetic separators
Low intensity magnetic separators, LIMS, are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of highest efficiency.
Metso Minerals HGMS - high gradient magnetic separators
High gradient magnetic separators available in cyclic design with process vessel diameters from 220 mm to 3 050 mm and in continuous design with matrix ring mean diameters 1 200 mm, 1 850 mm, 2 500 mm and 3 500 mm.
We are the OEM (original equipment manufacturer) for equipment manufactured under the following brand names, and is the only supplier of parts with the original drawings and design details for:
Metso Minerals, Denver, Svedala, Sala Maskinfabrik and Sala International LIMS and HGMS
|
|
Permanent magnet : automatic cleaning,stainless steel manufacture.
Control whith pneumatic or electrical actuator
|
|
Magnets remove iron particles from grainy and powdery (bulk)materials in free fall systems. This prevents damage to injection mould machines; extruders; mixing, grinding and other equipment. The magnets can be supplied in ATEX version in accordance with the 94/9 EU directive (Kema, the Dutch quality-control institute for electrical materials and appliances, workplace certification. Result: Quality improves and your expensive installations remain undamaged.
|
|
Construction : the cylindrical magnet housing as well as the cone are made in highly wear-resistant stainless-steel.
Cleaning : the automatic cleaning of the magnet is done while the core is swung out.
Options : automatic cleaning via a two-directions pneumatic flap box with control. automatic monitoring of the degree of accumulation.
Démagnétisation automatique :
In addtion : only with the electric version
|
|
MAGNETIC FILTERS
Goudsmit magnetic filters are able to remove ferrous particles of only 30 microns in size from fluids and powders transported under pressure. The filters have a wide range of applications like the foodstuffs- pharma-, and ceramic industry, but the principle is always the same. The powderful Neoflux® magnetic bars penetrate deep into the product so that they retain even the smallest ferrous particles. The bars can be removed from the product flow for cleaning by lifting the lid. Various test have confirmed that the powerful GSN 50 magnet can also catch stainless steel scrapings. These particles are so small that they would even escape a metal detector.
|
|
|
LIQUIMAG filter magnets were specifically designed and built to remove even the tiniest magnetic metal particles from many different kinds of liquid and paste products.
|
|
(PNEUMATIC)MAGNETIC SHEET SEPARATORS
Goudsmit's very powerful sheet separators loosen, lift and separate sticky or oily steel sheets from a stack in rapid succession.
- They remove the sheets systematically, one by one to ensure a smooth
production process.
- They prevent tool and die damage by eliminating double blank problems.
- Suitable for the separation of sheets of almost any length, width or shape,
inlcuding round and asymmetrical products.
- The permanent magnetic power does not decrease and is guaranteed for several
decades.
- Expensive compressed air systems are no longer required to separate the steel
sheets as separating magnets will do the job at a much lower cost.
- Pneumatic version can be switched on and off pneumatically and can be
adjusted in height and also the magnetic field's spread force can easily be
adjusted.
|
|
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 910 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 910 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
|
GF PRIMUS metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. Metal contaminants (and inclusions) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow, even at high flow rates.. Contaminated material is rejected into a container. The reject container is emptied automatically. The GF PRIMUS metal separation system is primarily used in industries where hygiene standards are less important. It is used for inspecting dry bulk materials.
|
|
High sensitivity metal separators for installation in free-fall (gravity-fed) systems
E-Z Tec 9100 Metal Separators can detect all types of metal, including stainless steel, in a variety of industries, including plastics, wood, textiles and recycling. High speed diverter ensures minimum loss of clean product.
|
|
NON-FERROUS SEPARATORS (EDDY CURRENT PRINCIPLE)
Removing non-magnetic metals, such as Aluminium, Copper, Brass) from 4 mm
Specific application: recycling, such as: incineration waste, glass, wood, household waste, rubble, plastic, WEEE scrap, refrigerators, shredder residue etc.
Cleaning: automatic, continuous
Suitable for belt widths up to 2000 mm
Electrical current required
|
|
The handling and transportation of heavy, unprocessed stone aggregate is rife with possibilities for picking up unwanted metal bodies. Separation is a simple but effective addition to traditional detectors.
Recycling
The world-wide metal recycling industry defines metals firstly as non-ferrous and ferrous. The basic separation of these two major sub-groups is achieved by magnetic means.
|
|
Suspended Permanent Magnets are employed to protect machinery, such as crushers, from damaging effects of ferrous metal contamination
They are positioned in a chute or more commonly over a moving conveyor belt specifically either over head pulley or across the belt and are used in the recycling, minerals extraction/quarrying industries as well as for other bulk materials applications, such as grain handling.
|
|
Ideal for material recovery facilities wishing to automate removal of nonferrous metals from trash, MSW, sand, glass, dirt, electronic scrap and shredded automobiles. Available in feed widths of 24, 36, 48 and 60 inches (610, 914, 1220, and 1524 mm).
Foundry Sand: remove non-ferrous metals like aluminum or brass from spent foundry sandmold chunks. This provides a remeltable metal and the sand can be treated and reused or land-filled as non-hazardous waste.
Glass: remove nonferrous metals from recycled glass monitors, fluorescent bulbs and other specialty glass.
Wood Waste: the final step in purifying shredded pallets, wood paneling and lumber before it is ground and mixed with resins to press out medium density fiberboard (MDF).
PET/Plastics: remove trace amounts of small nonferrous metallics from granulated plastic PET beverage bottles. This allows the flakes to be used to make new products including banding.
Boiler Bottom Ash: remove nonferrous metals from bottom ash generated by refuse (garbage) fueled co-gen plants. Aluminum used beverage cans (UBCs) that look like nuggets and red metals like faucets/plumbing hardware are typically repelled.
|
|
Minerals and Materials Processing (MMP) equipment includes wet drum, rare earth roll, superconducting magnetic, electrostatic, and electrodynamic separators; dry vibrating filters; as well as magnetic flocculators... for filtering iron contaminants, concentrating ores, and recycling wastes.
Separators - Magnetic
Separators - Drum
High Intensity Dry Magnetic Separators
Magnetic Separators - High Gradient
Wet Concentration
Separators - Wet Drum
High Intensity Wet Magnetic Filter
Dry Vibrating Magnetic Filters
Ball Mill Magnetic Separators
Electromagnetic Pulley
Separators - Pulley-type
Separators - Electrostatic
WHIMS Separators
Magnetic Flocculators
Demagnetizing Coils
|
|
|
For remove tramp iron automatically and continuously in process industries where granular or pulverized materials are conveyed in enclosed chutes and spouts. Diameter from 200mm to 900mm and length upto 1500mm.
|
|
Features : Efficient cost-saving recovery of harmful tramp iron in free-flowing materials.
Available in three standard strengths, sizes from 100mm through 1200 mm in 50mm increment.
Larger sizes are available to suit customers requirements.
Typical Applications:
Tramp iron removal from conveyors, chutes, duct and spouts.
They are simple to install and have no maintenance.
|
|
MAGNETIC SELF-UNLOADING SEPARATORS
They are intended to extract and to remove automatically ferromagnetic impurities and things from free-flowing bulk materials that carried by a conveyer belt from 650 to 2000 mm wide.
Extracted ferromagnetic things are disposed by conveyer belt into a storage.
|
|
DEP Electromagnet Model.
An electromagnet is a device that, when supplied with electrical energy, produces an electromagnetic force capable of attracting and retaining any ferrous metal objects that enter its magnetic field. The electromagnets described here are suspended over a conveyor belt to attract any pieces of ferrous metal that pass under them mixed in with the material to be cleaned.
DRAGO ELECTRONICA electromagnet are manufactured to work uninterruptedly in the toughest weather conditions without their physical or electrical characteristics being affected.
|
|
|
