|
|
|
|
|
|
WORLD CUT 400C
SPECIFICATION
Power: 400W
Work Table: 1250mm(W)2500mm (L)
Axial Travel: X 1250mm; Y 2500mm; Z 60mm
Machine Size: 2300mm(W)3300(L)1300mm(H)
Machine Weight: about 2000KG
BENEFITS
- RF 400W laser tube made by USA Synrad
- High precision ball-screw drive system provide high-speed motion perfectly
- MITSUBISHI servo motor drive system with high precision
- Non-touched auto following system enhances the focusing precision
- Fixed beam system ensures the same cutting quality in the whole working area
MATERIALS
Metal: Carbon steel, 3~4mm, with oxygen; Stainless steel, 1.5~2mm, with oxygen;
Wood: Dieboard, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving;
...
ABOUT US
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
|
|
|
|
WORLD CUT 200C
SPECIFICATION
Power: 200W
Work Table: 1250mm(W)2500mm (L)
Axial Travel: X 1250mm; Y 2500mm; Z 60mm
Machine Size: 2000mm(W)3500(L)1280mm(H)
Machine Weight: about 2000KG
BENEFITS
RF 200W laser tube made by USA Synrad
High precision ball-screw drive system provide high-speed motion perfectly
MITSUBISHI servo motor drive system with high precision
Fixed beam passing system ensures the same cutting quality in the whole working area
Auto following system make sure the focus point do not change at anywhere in the working area.
MATERIALS
Metal: Carbon steel, 1~2mm, with oxygen; Stainless steel, 1mm, with oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving
...
ABOUT US
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
WORLD CUT 400AII
Specification
Power: 400W
Work Table: 1250mm(W)1250mm (L)
Axial Travel: X 1250mm; Y 1250mm; Z 60mm
Machine Size: 1800mm(W)2200(L)1200mm(H)
Machine Weight: about 1000KG
Benefits
High precision ball-screw drive system provide high-speed motion perfectly;
&MITSUBISHI servo motor drive system with high precision;
&Fixed beam system ensures the same cutting quality in the whole working area;
&Auto following system make sure the focus point don't change at anywhere in the working area.
Appliable Materials
Metal: Carbon steel, 3~4mm, with Oxygen;
Stainless steel, 1.5~2mm, with Oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving
...
About us
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
|
|
The SBM-1200-M Laser Cutting and Engraving System comes equipped with a CO2 laser combining flying optics with a precision Direct Drive motion system.
CO2 laser-equipped systems provide highly accurate cutting, welding, engraving and marking capabilities for multiple materials.
- Sealed CO2 laser from 50 to 500 watt.
- Ease of installation allows for quick startup and material processing
- Handles continuous roll and standard sheet size stock
- Ideal for small machine shops and sheet metal fabricators.
- Extra-large aperture on the beam benders and focusing optics allows connections of up to 1,500 CW or 3,000w pulsed lasers
- Forced air cooling of the beam benders & focusing optics for stability
- For metal applications our systems are equipped with 45 degree polarization optics to ensure high-quality, even cutting in both directions
|
|
General description
Application: Cutting battery dielectric from paper for use in pace-maker implants.
Features: This laser cutting system uses a 30 watt air-cooled CO2 laser to cut the dielectric pattern from a reel of paper. An automated feed system indexes the foil across dual vacuum-assisted platens.
|
|
|
|
|
|
Large format Laser Pattern cutter for shipbuilding, missile, aerospace and automotive industries.
When equipped with a high power Fiber Laser system can cut real size aluminum (or other aerospace grade) sheet metal components for aircraft and missile skins and deliver high throughput and unmatched accuracy in any area of a giant cutting table.
Cutting real size ship bodies components became feasible with multi kilowatt fiber lasers.
When equipped with CO2 laser system can cut Template Paper (flat or rolled 120 wide), Plywood (4 x 8 ft), and Cypress Board (2 x 24 x 16). Automatic feeding and take-up function for paper rolls is optional.
This system will achieve a level of quality and detail that is unprecedented in the industry for large size laser cutting and engraving systems. It can cut/engrave stainless steel, mild steel, copper, brass, aluminum, leather, non transparent plastics, plaques, create stencils, and more. It has the most advanced cutting head with auto focus and can perform effective N2 or O2 gas-assisted cutting under pressures of up to 250 PSI. Ease of installation gives the system plug-and-play characteristics and a quick startup time.
|
|
|
|
|
|
-HD and HD-L series are innovative 2D laser cutting machines with very compact body, high feed rate, cutting speed and acceleration. The motion unit operates according to the flying optics principle. By using this method, the acceleration can reach significant levels (2g) independently from the workpiece weight. The machine concept assures high class cutting result and efficient production prosess.
Strongpoints and Added Valves
- High performence, high precision; as a result of rigit and stable construction and high tech linear drive technology.
- High flexibility; loading and unloading is very effective, designed to decrease the preparation time and to increase the efficiency.
- The design of the machine allows you to profit from linear drive technology by housing very high speed and accurate results. HD and HD-L Laser cutting machines cut a wide range of materials and thickness with high speed and precision.
- The combination of the state of the art linear direct drives for the axis movement and the control technology of an 840D from Siemens with a CO2 slab laser from Rofin sinar.
- Extremely compact; The single welded construction design made the machine very rijit and compact. The machine can be easily moved and set-up. The machines compact design requires less floor space than standart machines.
- Low maintenance and low running cost.
- High safety standarts with fume exhaust system and dual circuit chiller.
- High speed cutting and piercing technology offers a great advantage to be one step further.
- It is possible to load material and unload finished parts during cutting moress to increase productivity.
- Effective software supports.
|
|
|
|
|
|
LASER PLOTTER SYSTEM FOR CUTTING AND ENGRAVING
Top-quality CO2 LASER source exceptionally reliable and long-lasting.
Size Working Area ( 610mm x 457mm) (24 x 18 in).
PLIII is a high speed and high acceleration machine.
It can reach a high speed within a short period of time.
This means that, with PLIII, the user can engrave an object in a very short time.
PLIII is also equipped with modulized laser system to ease the laser maintenance and Red Indicator Light (optional) to ease the laser alignment procedures.
The Printer Driver has a custom language Interface function to allow the users to change the driver default language into their local languages.
Safety Standards CDRH Class 1 CE certification
Motorized Z-axis adjustment
Computer Interface by parallel port.
Compatible with most Windows Integrated CAD programs for graphics and character generation.
Digital power control from 0-100% with automatic proportional pulsing and color linked power settings.
Intelligent memory buffer with automatic data Storage up to 99 files with all settings.
LCD display showing current file name, laser power, raster or vector speed, run time, files loaded into buffer, working time, setup and diagnostic menus.
Changeable languages.
Optimized landscape modes with raster engraving or combined vector cutting and raster engraving.
Facility Requirements
--Outside Exaust required: one 4 connection.
Available options on request
Rotary device
Honeycomb Cutting Table
|
|
|
The Trotec Speedy 500 is the ultimate laser cutting and engraving system for those who require fast processing of large volumes and/or large surface materials, where smaller laser models are often insufficient. The Speedy 500 is the most productive system in its class.
|
|
Laser cutting is being used for an increasing number of applications in sheet metal processing and represents a unique quality. The high level of production flexibility and the almost unlimited diversity of materials and shapes explain its worldwide recognition as an indispensable basic technology.
High precision of the dimensions and minimum heat distortion of the sheet parts are just two of the advantages that convince the user of the first class cutting results.
|
|
FALCON CO2
The definitive solution to obtain the maximum productivity with the automatic nesting and cutting operations with a CO2 laser on materials like wood, plastics, rubber, leather and more others.
STRONG POINTS OF THE SOLUTION
- High productivity : Full automatic charging and discharging system, with a real time recording of length and width values of the sheet and nesting optimization by software.
- Safety :Fully covered and dust-proof sealed optical path.
- Reliability : CO2 laser source produced in the U.S.A. in conformity with the most severe military standard.
- Versatility : Possility to charge and cut automatically sheets with different dimensions saving raw material.
- Easy to use : Integrated software expecially developed for a fast and simple setup of all the optimization and cutting sheet operations.
|
|
LCW laser cutting system is a popular and most trusted model in laser cutting market. It can be applied to many applications: Acrylic, Veneer, MDF board, Wood, Plywood, Masonite, Rubber, Vinyl, Foam, Cloth, Textile, Fabric, Chipboard, Cardboard, Paper, Leather and all non-metal materials.
The features of LCW includes,
Easy operation & maintenance
Durable A.C. servo motor
High cutting speed with best arcs and small line
EZ-CUT Software with Windows based software
Tilt hopper & part-catch drawer design
Path order automatically/manually
|
|
LCD series systems provide strong, stable and smooth operations for MDF, die board and plywood. It is the best choice for die board laser cutting systems
Features & Benefits:
Easy operation & maintenance
Magnetic linear scalar
Wide cut width for die-board
Path order automatically/ manually
Good control over corner cut
EZ-CUT II software with Windows based software
Mizibishi Durable A.C. Servo motor
Well sealed focusing unit
Pass-through design
Optic path compensation design
Z-axis tracer to adjust the focusing accordingly.
|
|
The C139 is a INITIATE laser cutting machine with working area 1300 x 900mm.
Features & Benefits
1. LCD Touch Panel -- Operate & modify parameters more convenient.
2. Pass Through Design -- Enable continue feeding material front to rear (1300mm width).
3. Sloping Hopper Design -- Collect the cutting work pieces automatically.
4. Collecting Drawer -- Collecting work pieces easily.
5. Modularize Design -- Enable maintenance cheaper, faster & easily.
6. High Cutting Ability -- Fast cutting speed up to 30M/min and Acrylic cutting up to thickness 30mm.
7. Red Pointer -- Help user to locate the laser beam.
8. Honeycomb Table -- Special designed to provide best support for soft material such as textile and card board ..etc.
9. CAM Software (Option) -- EZLASER CAM (CUTTER) provides special functions to make excellent product rapidly.
10. Versatile Cutting Application -- Like Acrylic, Signs, Architecture Models, Plastic Fabrication, Gaskets, Router Template Stencils, Timber and Textileetc.
|
|
CO2 LASER CUTTING MACHINES
High power, fixed laser, mobile mirrors, high-pressure focus head
Cutting equipment optimized for the following materials :
. Plastics
. Synthetic resins
. Wood and by-products
. Soft steel
. Stainless steel
Technology
. Transmission by ballscrews on all axes with double ballscrew for X axis
. CO2 laser source with rapid flow and RF excitation, continuous or pulse mode : FANUC (1000 or 2000 W)
. Numerical Control : FANUC 16OiL
. Option : SLAB ROFIN BAASEL laser from 1 to 4 KW with a SIEMENS 840Di Numerical Control
A completely-covered fast, rigid and accurate equipment
|
|
THUNDER 1 and THUNDER 2
Laser Type : CO2 / Yag / Fiber. The exclusive solution for speed and flexibility. The possibility to make marking , engraving and cutting operations using both galvo and plotter systems, the laser with up to 600 Watt power available, the capability to machine in continuos on a working area up to 2.000 x 1.000/1.500/2000mm
|
|
|
|
|
|
The LCG series have bigger working area up to 2500 x 1500mm ( 8ft x 5ft ) and high laser power for cutting big and thick material to suitable size for customer. It suits to material provider like Acrylic, MDF Board, Lasrge Puzzle and Large Wood Plate...etc.
Features & Benefits:
1. Large Working Area -- Suit to 8 ft x 5 ft thick material cutting.
2. Standalone Control Panel -- Convenient operation and provide multiple language support.
3. 5.7" Color LCD Touch Panel -- Convenient operation and provide multiple language support.
4. Lens Socket Focu Module -- Convenient to exchange and maintain lens.
5. Upper Exhaust Design -- Ehance smoke exhaust ability.
6. Collecting Drawer -- Collecting work pieces easily.
7. Smooth Feeding Design -- Make material sheet feeding easily.
8. High Cutting Accuracy -- Equip with servo motor, rigid structure and accuracte linear guide.
9. Sealed Laser Optic Path -- Ensure operating safety.
10. Modularize Design -- Enable maintenance faster & easily.
11. Upper Exhaust Design -- Exhaust eduction more efficient.
12. CAM Software (Option) -- EZLASER CAM (CUTTER) provides special functions to make excellent product rapidly.
|
|
|
The new Trotec Professional is a large format laser vector cutting machine that provides excellent results on wide range of materials including wood, acrylic, films, paper, cork & leather. The Professional can also raster engrave with exceptional detail. Your first impression will tell you that the Professional has been designed to produce high quality results with a minimum of maintenance. This is not a modified router with a laser mounted as an after thought. The chassis alone weighs over 800 kgs.(18 cwt) to provide a robust and stable work platform. All sensitive components are protected by our In-Pack Technology to minimize contamination from smoke and debris. What you cant see from the outside is the same level of high quality components that are designed into the motion system, electronics, optics, work platform and laser tube. When you see the Professional in action you will know that this machine is truly the best.
|
|
|
|
|
|
Cutting System YRC
3D cutting with fibre optical coupled lasers
Applications:
o 3D cutting
o robot
o multiple linear drive laser equipment
o cutting of thin metal sheets
o cutting of metals
System types/Lasers:
o for all solid-state lasers like Nd:YAG, disc, fibre optical and diode lasers
Features:
o complete system consisting of linear drive, cutting system, controller and collimation unit
o integrated, non-contact, patented distance sensors
o error signals if collision or cable breakage occurs or if measuring area tolerances are exceeded
o symmetrical design
o easy access to all connections (top)
o integrated collision detection
o water cooling system for optical components and fibre sockets
o all water-conducting parts made of stainless steel
o integrated collimation unit
Technical Specifications:
o max. laser power: 4 kW
o electronics: Lasermatic Z
o focal lengths focusing: 73 mm, 100 mm
o focal lengths collimation: 73 mm, 100 mm
o max. clear aperture: 26 mm
o axial lengths: 350 mm / 380 mm
o dimensions (W x H): 163 x 132 mm
o mass of complete system: about 5 kg
|
|
User-friendly and versatile
Easy-to-use, like a laser printer
Compatible with Microsoft Windows software
Expedites engraving, cutting and point drilling
Pin-Type auto focus
Easy to maintain Mirror Lens Air from Nozzle Alignment Laser Head
Easy-to-use operator controls
Integrated Controls
LED Lighting for effective observation
Four doors Open easily supports extra long working pieces
Air assist pump ensures high-quality output
Multi-lingual drivers support local requirements
Effective for high production
Max. Speed:1524mm/sec(60 inch/sec)
Stronger Structure
Higher Precision
Cutting Faster and Smoother enhances work flow and quality
Temporary Reference Point
|
|
AUREL ALS200 Scribing & Drilling CO2 laser system
Description
The AUREL ALS200 Laser System has been designed for scribing, drilling and cutting of ceramic substrates for thin film and thick film hybrid circuits.
The system is compact, reliable, safe and easy to use.
This is the result of the technical collaboration between AUREL and EL.EN, two companies with many years of experience in the production of YAG and CO2 laser generators & systems for electronic.
The basic components of ALS200 is the Laser Mainframe and the Electronic control.
The first one consists of a completely closed cabinet containing the following modules:
- The LASER SOURCE with gas (CO2) plasma tubes
- The OPTICAL HEAD
|
|
THE GREATEST ADAPTABILITY:
- It can be installed without any physical contact with machines.
- The same laser can work over several machines in one line.
- It is possible to achieve highly precise and made to measure systems, to better organize space.
POWERFUL AND GUARANTEED:
- CO2 sealed LASER SOURCE with nominal power from 40 to 400 W. Available in the following versions:
- with air cooling (low-cost)
- with thermostated cooling liquid
- BRUSHLESS MOTORS move the laser column along the bar with high acceleration, speed and stops accurately and efficently.
|
|
|
The CP SERIES and the new CV SERIES lasers are CONVERGENT LASERS latest and most modern examples of fast axial flow CO2 lasers. These lasers were designed to produce the power and high quality beam for the material processing requirements of PRIMA INDUSTRIE and PRIMA North America systems. These lasers have proven themselves in the most demanding applications around the world.
|
|
Goal 60-160
The laser technology let you think of your biggest way
OT-LAS has set-up Goal 60-160, a machine for decoration of large areas: size up to 1600x1600 mm obtained in a single useful area, or greater by means of automated devices for piece displacement.
Particularly suitable for whole leather or shaped, Goal 60-160 has been projected for the decoration diversifying: cutting, engraving, drilling...in a single run step.
The flexibility performed by Goal 60-160 satisfies your treatment requirements on every type of fabrics:from the shaped pieces to the ready-made wear, to the whole roll.
Integrable to a device for unroll and roll up, it is the best solution for continuous cycle production in high precision.
Fully designed and manufactured on site by the Group, the system combines efficiency and reliability, ensuring rapid and safe assistance.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :