|
|
|
|
|
|
WORLD CUT 200C
SPECIFICATION
Power: 200W
Work Table: 1250mm(W)2500mm (L)
Axial Travel: X 1250mm; Y 2500mm; Z 60mm
Machine Size: 2000mm(W)3500(L)1280mm(H)
Machine Weight: about 2000KG
BENEFITS
RF 200W laser tube made by USA Synrad
High precision ball-screw drive system provide high-speed motion perfectly
MITSUBISHI servo motor drive system with high precision
Fixed beam passing system ensures the same cutting quality in the whole working area
Auto following system make sure the focus point do not change at anywhere in the working area.
MATERIALS
Metal: Carbon steel, 1~2mm, with oxygen; Stainless steel, 1mm, with oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving
...
ABOUT US
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
WORLD CUT 400AII
Specification
Power: 400W
Work Table: 1250mm(W)1250mm (L)
Axial Travel: X 1250mm; Y 1250mm; Z 60mm
Machine Size: 1800mm(W)2200(L)1200mm(H)
Machine Weight: about 1000KG
Benefits
High precision ball-screw drive system provide high-speed motion perfectly;
&MITSUBISHI servo motor drive system with high precision;
&Fixed beam system ensures the same cutting quality in the whole working area;
&Auto following system make sure the focus point don't change at anywhere in the working area.
Appliable Materials
Metal: Carbon steel, 3~4mm, with Oxygen;
Stainless steel, 1.5~2mm, with Oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving
...
About us
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
|
|
|
|
|
|
WORLD CUT 400C
SPECIFICATION
Power: 400W
Work Table: 1250mm(W)2500mm (L)
Axial Travel: X 1250mm; Y 2500mm; Z 60mm
Machine Size: 2300mm(W)3300(L)1300mm(H)
Machine Weight: about 2000KG
BENEFITS
- RF 400W laser tube made by USA Synrad
- High precision ball-screw drive system provide high-speed motion perfectly
- MITSUBISHI servo motor drive system with high precision
- Non-touched auto following system enhances the focusing precision
- Fixed beam system ensures the same cutting quality in the whole working area
MATERIALS
Metal: Carbon steel, 3~4mm, with oxygen; Stainless steel, 1.5~2mm, with oxygen;
Wood: Dieboard, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving;
...
ABOUT US
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
Laser Photonics is proud to introduce, the First High Power Fiber Laser Precision Tool, the LINK PLCS. The Link PLCS will help quicken production time and lower manufacturing costs. This system can achieve a level of quality and detail that is unprecedented in the industry for laser cutting and engraving. It has a granite base and can perform effective N2, AR or O2 gas assist cutting under pressures of up to 250 psi. Due to its direct drive motor with integrated software control, the LINK PLCS preserves a large amount of detail when cutting and engraving.
- Fastest cutting speeds on the market for comparable systems
- Small footprint frees up valuable work and floor space
- Low power consumption for more environmentally friendly production
- No replacement parts on laser necessary
- Lowest operating cost among all laser types
- Ease of installation allows for quick start up
- Highest cutting quality available from 1064 nm lasers
- No beam delivery system maintenance
|
|
|
|
|
|
WORLD CUT 100SA
Specification
Power: 100W laser tube made in China, or made by GSI UK
Work Table: 1250mm(W)900mm (L)
Axial Travel: 1250mm(X); 900mm(Y); 40mm(Z)
Machine Size: 1750mm(W)1550mm(L)1150mm(H)
Machine Weight: about 500KG
Benefits
- Laser selectable;
- High rigidity light weight aluminum-casting gantry (patented);
- Newly designed laser cutting head (patented), light and beauty;
- High precision ball-screw transmitting system provide high-speed motion perfectly;
- Imported MITSUBISHI servo motor drive system with high precision;
- Taiwan chiller specially for laser systems;
Acceptable Material Range
Acrylic: 30mm acrylic;
Wood: 10mm MDF;
Leather, Cloth and other non-metal materials.
About us
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and meet your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
|
|
|
|
WORLD CUT 200AII
Specification
Power: 200W
Work Table: 1250mm(W)1250mm (L)
Axial Travel: X 1250mm; Y 1250mm; Z 60mm
Machine Size: 1800mm(W)2200(L)1200mm(H)
Machine Weight: about 1000KG
Benefits
High precision ball-screw drive system provide high-speed motion perfectly;
&MITSUBISHI servo motor drive system with high precision;
&Fixed beam system ensures the same cutting quality in the whole working area;
&Auto following system make sure the focus point don't change at anywhere in the working area.
Appliable Materials
200AII (with 200W DC laser tube made by GSI USA)
Metal: Carbon steel, 1~2mm, with Oxygen; Stainless steel, 1mm, with Oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting;
...
200AII (200W RF laser tube made by Synrad USA)
Metal: Carbon steel, 1~2mm, with Oxygen; Stainless steel, 1mm, with Oxygen;
Wood: Die board, 18mm and 22mm;
Acrylic: 40mm, cutting and engraving
...
About us
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
|
|
|
|
|
|
The newest edition to Laser Photonics product line is the Titan FLS 48. This system is Laser Photonics first multipurpose fiber laser cutting system with a single pallet shuttle table. It is equipped with a high-powered, energy efficient fiber laser and an advanced direct drive motion control platform. Comparable to other systems, the Titan has a lighter weight design and the fastest cutting speed on the market for comparable systems. This system offers ultra low power consumption allowing for the lowest operating costs among all laser types. The Titans fully software-controlled geometry alignment eliminates the need for special installation requirements. The Titan requires no optical system alignment, laser service or laser replacement parts making this system virtually maintenance free.
- 2,000 to 5,000 Watt Upgradeable Fiber Laser (1000 watt increments)
- Fully Enclosed Class I Safety System
- High Pressure Gas Assist N2, Ar, or O2 Gas-Assisted Cutting Under Pressures of Up to 250 psi
- Software-Controlled X-Y Orthogonality
- Smallest HAZ (heat affected zone) in the Industry
- Latest generation Ytterbium Fiber Laser with Up to 5,000 Watt CW Power
- Highest Cutting Quality Available From 1064 nm Lasers
- Easy Installation and No Reeducation required for CNC Operators (G-Code Programming)
- Water Cooled
|
|
|
|
|
|
The Excalibur Flexible Manufacturing Cell is a unique concept system from Laser Photonics, LLC. The Excalibur is the latest in lean manufacturing technology and offers a complete turnkey solution for manufacturers and production facilities. This new concept introduces the idea of using one Fiber Laser Module to control the tasks of up to four different machines with the use of one optical switch. The Excalibur is specifically designed for any manufacturer or production facility that performs applications which entail laser cutting, welding or remote welding and sheet cutting or marking. This concept is leading the way in helping manufacturers increase their production speed while lowering operating costs, floor space and initial capital spent on more expensive machines. The Excalibur is perfect in situations where robot training time is slowing down production and costing valuable time and money.
One of the main benefits of this flexible manufacturing cell is the many ways the system reduces operation costs. Since the system is operating off of one module the cost is instantly reduced by the amount of additional modules. In these cases the Excalibur can easily be upgradable when production needs to be increased.
|
|
|
|
|
|
Profile Minter 3015 - The affordable laser cutting solution
The new Profile Minter laser cutting system offers the industry unmatched performance and reliability at an extremely affordable price. The Minter is opening up the possibility of in house laser cutting to many companies that in the past couldn't justify the capital expenditure. Based on the already very popular Farley Laserlab Profile Plus laser cutting system the Minter will be sure to be a welcome solution form many companies profiling needs.
Cutting Performance
Traverse speed: Up to 60m/min
Accuracy on axis: 0.05mm
Repeatability: 0.03mm
Resolution: 0.01mm
Configuration
Cutting Widths: 1.5m
Cutting Length: 3m
Z stroke: 100mm
Mechanical
Bearings / Rails: Linear bearings
Drive System: Ball Screw with SIEMENS servos and drives
Electrical/Electronic
HMI / CNC: Farley Laserlab / Siemens 840D
Screen: 24" Touch Screen
Communication: Ethernet LAN
Laser Options
Fast Flow: CP4000 4kw Fast flow Laser
Max Material Thickness
Mild Steel: 20mm
Stainless Steel: 12mm
Aluminium: 8mm
|
|
LaserWorkStation - LWS-P
LWS-P
Hochdynamisches Laserbearbeitungssystem in Portalbauweise zur Przisionsbearbeitung
Grundgestell aus geschliffenem Hartgestein
Geschwindigkeitsabhngige Laserleistungsregelung
Verfahrwege Linearachsen:
X bis 1000 mm
Y bis 800 mm
Z bis 400 mm
Wiederholgenauigkeit X/Y bis 2 m
Linearmotoren fr x- und Y-Achsen sichern hohe Geschwindigkeiten und Beschleunigungen
CNC-Steuerung SINUMERIK 840D
|
|
The SBM-1200-M Laser Cutting and Engraving System comes equipped with a CO2 laser combining flying optics with a precision Direct Drive motion system.
CO2 laser-equipped systems provide highly accurate cutting, welding, engraving and marking capabilities for multiple materials.
- Sealed CO2 laser from 50 to 500 watt.
- Ease of installation allows for quick startup and material processing
- Handles continuous roll and standard sheet size stock
- Ideal for small machine shops and sheet metal fabricators.
- Extra-large aperture on the beam benders and focusing optics allows connections of up to 1,500 CW or 3,000w pulsed lasers
- Forced air cooling of the beam benders & focusing optics for stability
- For metal applications our systems are equipped with 45 degree polarization optics to ensure high-quality, even cutting in both directions
|
|
General description
Application: Cutting battery dielectric from paper for use in pace-maker implants.
Features: This laser cutting system uses a 30 watt air-cooled CO2 laser to cut the dielectric pattern from a reel of paper. An automated feed system indexes the foil across dual vacuum-assisted platens.
|
|
Laser Photonics is proud to introduce, the First High Power Fiber Laser Precision Tool, the LINK PLCS. The Link PLCS will help quicken production time and lower manufacturing costs. This system can achieve a level of quality and detail that is unprecedented in the industry for laser cutting and engraving. It has a granite base and can perform effective N2, AR or O2 gas assist cutting under pressures of up to 250 psi. Due to its direct drive motor with integrated software control, the LINK PLCS preserves a large amount of detail when cutting and engraving.
Materials:
Aluminum
Anodized Aluminum
Stainless Steel
Alloy Metals
Copper
|
|
|
|
|
|
Large format Laser Pattern cutter for shipbuilding, missile, aerospace and automotive industries.
When equipped with a high power Fiber Laser system can cut real size aluminum (or other aerospace grade) sheet metal components for aircraft and missile skins and deliver high throughput and unmatched accuracy in any area of a giant cutting table.
Cutting real size ship bodies components became feasible with multi kilowatt fiber lasers.
When equipped with CO2 laser system can cut Template Paper (flat or rolled 120 wide), Plywood (4 x 8 ft), and Cypress Board (2 x 24 x 16). Automatic feeding and take-up function for paper rolls is optional.
This system will achieve a level of quality and detail that is unprecedented in the industry for large size laser cutting and engraving systems. It can cut/engrave stainless steel, mild steel, copper, brass, aluminum, leather, non transparent plastics, plaques, create stencils, and more. It has the most advanced cutting head with auto focus and can perform effective N2 or O2 gas-assisted cutting under pressures of up to 250 PSI. Ease of installation gives the system plug-and-play characteristics and a quick startup time.
|
|
Spirit GX
-38"x24" (960 x 610 mm) extra large working area.
- QSM (Quality Speed Mode) maintains 100% engraving quality while operating at maximum speed.
- Patented SmartACTTM motion control technology increases your productivity by reducing ramping process and job running time.
- Drag and Engrave feature assures remarkable easy and fast set-ups.
- High speed DC motor for precise and rapid movement of laser carriage.
- Linear guide for exceptional precision under high speed.
- Pass-through front and rear doors to accommodate long work pieces.
|
|
|
In 2002 Fonon Technology acquired Laser Photonics, a high tech laser equipment manufacturing company in Florida, to commercialize the accumulated intellectual property in the form of material processing equipment. Laser Photonics has made a name for itself by producing quality industrial products for a competitive price. The uses for laser cutting and engraving systems can be applied to many industries for a variety of purposes. Aerospace contractors, automotive, and marine ship-building manufacturers use Laser Photonics' industrial-grade laser cutting and marking equipment for their production lines
|
|
|
|
|
|
WORLD CUT 100NC
SPECIFICATION
Power: 100W
Work Table: 1250mm(W)2500mm (L)
Axial Travel: X 1250mm; Y 2500mm; Z 40mm
Machine Size: 1800mm(W)3100(L)1200mm(H)
Machine Weight: about 1500KG
BENEFITS
100W RF laser made by USA Synrad
High precision ball-screw drive system provide high-speed motion perfectly
MITSUBISHI servo motor transmitting system with high precision
Fixed beam passing system ensures the same cutting quality in the whole working area
Auto focusing system make sure the focus point do not change at anywhere of the working area.
APPLICABLE MATERIALS
Acrylic: 30mm, cutting and engraving;
MDF: 15mm;
Dieboard: 18mm;
...
ABOUT US
Our main line is CO2 laser cutting machine with high quality used in cutting, engraving, etc. The materials ranges acrylic, wood, metal, and so on. We wish WORLDCUT laser cutting machines in different power (100W, 200W, 400W), different worktable, would bring you good profits, and satisfy your various needs.
For more details, please trip our website www.dahenglaser.com, or contact with us by:
Tel: (86) 10 60529761
Fax: (86) 10 60521349
Email: sales@dahenglaser.com
Contact person: Jane Wong
|
|
General description
Application: Cutting battery cathodes from aluminum foil for use in pace-maker implants.
Features: This laser cutting system uses a 355nm laser to cut the cathode pattern from a reel of foil. An automated feed system indexes the foil across a vacuum-assisted cut platen. A pick-and-place robot removes and stacks the cathodes.
|
|
|
MultiCam laser series machines are flying optic sheet cutting systems. These large format systems are capable of vector cutting and raster engraving. The welded, stress relieved all-steel frame insures rigidity and structural integrity under the most demanding conditions. Percision digital AC brushless servo drives and helical rack and pinion allow for smooth and accurate high speed cutting. The power ranges are 400 watts (water cooled), 200 watts (water cooled), and 100 watts (air cooled). To learn more about MultiCam's CNC Laser systems click the navigation to the left or an image below.
|
|
PROFILE PLUS - THE PROVEN LASER CUTTING SYSTEM
The Farley Laserlab Profile Plus is the best value for money laser cutting system available on the market today. The Profile Plus is a reliable, flexible, profitable and affordable laser cutting system.
The Profile is a complete laser cutting system incorporating a 1.5m X 3m high speed transfer table to reduce down time caused by loading and unloading. The Profile Plus comes with a Hass cutting head and Precitec Height following system. The Profile Plus runs all Siemens servos and drives with a Siemens 840D controller and Farley Laserlab HMI. The Profile Plus comes with a choice of laser resonators including PRC and Rofin. The Profile Plus is one of the best value for money laser cutting machines available with 1000's installed worldwide.
The Profile Plus is designed in Australia by Farley Laserlab!!
|
|
Modular system LWS-H
* Welded steel construction with granite table
* Laser beam source height-adjustable in the Z axis
* Travel of linear axes:
X = 200...600 mm
Y = 200...400 mm
Z = 200...400 mm
* Repetitive accuracy 2 m
* AC servo motors or linear direct drives
* CNC control with SINUMERIK 840D or Heidenhain TNC 410/426
|
|
Fonon's Zero Width Laser Dicing Technology (ZWLDT) will cover unprecedented explosive growth and demand in semiconductor markets in China, Taiwan, Japan and Korea. This technology has lead to products, such as the BlackStar, that offer the best in silicon wafer dicing over existing technologies.
ZWLDT will slice the wafer much safer than mechanical saws that may cause wafer damage, and increase the yield per wafer as well as maximum throughput while minimizing the HAZ.
With the technology Fonon acquires, Fonon Display and Semiconductor Systems (FononDSS), has been able to launch a number of products that make the most of the technology for the semiconductor and flat panel display industry.
|
|
Fiber Laser Cutting Robot :
The Fiber Laser Robot is ideally suited to integration and automation for cutting & welding applications. Fiber lasers in the multi-kilowatt range offer dynamic material processing capabilities for manufacturers. These custom-built systems offer increased flexibility, reliability, and quality. Optimum return on investment is guaranteed with these fully programmable machines.
- High Power Fiber Laser up to 5000 watt.
- Capacitive sensor for metal surfaces cutting
- A new generation of industrial laser equipment
- Fiber laser allows Multi Axis flexibility.
- Optical isolator for hi reflective metal cutting.
- Integrated aiming beam for programming and process training
- Excellent performance in material handling, machine tending and process applications
- Robotic Arm Brand: ABB, KUKA, Panasonic.
|
|
|
|
|
|
-HD and HD-L series are innovative 2D laser cutting machines with very compact body, high feed rate, cutting speed and acceleration. The motion unit operates according to the flying optics principle. By using this method, the acceleration can reach significant levels (2g) independently from the workpiece weight. The machine concept assures high class cutting result and efficient production prosess.
Strongpoints and Added Valves
- High performence, high precision; as a result of rigit and stable construction and high tech linear drive technology.
- High flexibility; loading and unloading is very effective, designed to decrease the preparation time and to increase the efficiency.
- The design of the machine allows you to profit from linear drive technology by housing very high speed and accurate results. HD and HD-L Laser cutting machines cut a wide range of materials and thickness with high speed and precision.
- The combination of the state of the art linear direct drives for the axis movement and the control technology of an 840D from Siemens with a CO2 slab laser from Rofin sinar.
- Extremely compact; The single welded construction design made the machine very rijit and compact. The machine can be easily moved and set-up. The machines compact design requires less floor space than standart machines.
- Low maintenance and low running cost.
- High safety standarts with fume exhaust system and dual circuit chiller.
- High speed cutting and piercing technology offers a great advantage to be one step further.
- It is possible to load material and unload finished parts during cutting moress to increase productivity.
- Effective software supports.
|
|
|
|
|
|
LASER PLOTTER SYSTEM FOR CUTTING AND ENGRAVING
Top-quality CO2 LASER source exceptionally reliable and long-lasting.
Size Working Area ( 610mm x 457mm) (24 x 18 in).
PLIII is a high speed and high acceleration machine.
It can reach a high speed within a short period of time.
This means that, with PLIII, the user can engrave an object in a very short time.
PLIII is also equipped with modulized laser system to ease the laser maintenance and Red Indicator Light (optional) to ease the laser alignment procedures.
The Printer Driver has a custom language Interface function to allow the users to change the driver default language into their local languages.
Safety Standards CDRH Class 1 CE certification
Motorized Z-axis adjustment
Computer Interface by parallel port.
Compatible with most Windows Integrated CAD programs for graphics and character generation.
Digital power control from 0-100% with automatic proportional pulsing and color linked power settings.
Intelligent memory buffer with automatic data Storage up to 99 files with all settings.
LCD display showing current file name, laser power, raster or vector speed, run time, files loaded into buffer, working time, setup and diagnostic menus.
Changeable languages.
Optimized landscape modes with raster engraving or combined vector cutting and raster engraving.
Facility Requirements
--Outside Exaust required: one 4 connection.
Available options on request
Rotary device
Honeycomb Cutting Table
|
|
A material perfect for laser processing. Where smooth, flat and perfect cutting is essential, eurolaser has the ideal solution.
- Displays
- Advertisements
- Sprue separation/removal
The eurolaser systems are exceptionally clean and precise, and the exact engraving functions enable the production of personal gifts. Easy operation and "soft" tool changes allow for integration into automatic production lines.
The shuttletable system developed by eurolaser automates the process and ensures a better utilization of your system.
- Increasing efficiency by minimising downtime
- Increased productivity, because loading and unloading during the cutting process possible
- Considerably easier accessibility of the pieces produced by moving the material support
- Easy replacing due to rail-guided table system
- Easy handling
- Available on the euro laser systems, M-800 and M-1600 (Processing area: 1,300x710 mm and 1,300x1,535 mm)
|
|
|
The Trotec Speedy 500 is the ultimate laser cutting and engraving system for those who require fast processing of large volumes and/or large surface materials, where smaller laser models are often insufficient. The Speedy 500 is the most productive system in its class.
|
|
Laser cutting is being used for an increasing number of applications in sheet metal processing and represents a unique quality. The high level of production flexibility and the almost unlimited diversity of materials and shapes explain its worldwide recognition as an indispensable basic technology.
High precision of the dimensions and minimum heat distortion of the sheet parts are just two of the advantages that convince the user of the first class cutting results.
|
|
FALCON CO2
The definitive solution to obtain the maximum productivity with the automatic nesting and cutting operations with a CO2 laser on materials like wood, plastics, rubber, leather and more others.
STRONG POINTS OF THE SOLUTION
- High productivity : Full automatic charging and discharging system, with a real time recording of length and width values of the sheet and nesting optimization by software.
- Safety :Fully covered and dust-proof sealed optical path.
- Reliability : CO2 laser source produced in the U.S.A. in conformity with the most severe military standard.
- Versatility : Possility to charge and cut automatically sheets with different dimensions saving raw material.
- Easy to use : Integrated software expecially developed for a fast and simple setup of all the optimization and cutting sheet operations.
|
|
LCD series systems provide strong, stable and smooth operations for MDF, die board and plywood. It is the best choice for die board laser cutting systems
Features & Benefits:
Easy operation & maintenance
Magnetic linear scalar
Wide cut width for die-board
Path order automatically/ manually
Good control over corner cut
EZ-CUT II software with Windows based software
Mizibishi Durable A.C. Servo motor
Well sealed focusing unit
Pass-through design
Optic path compensation design
Z-axis tracer to adjust the focusing accordingly.
|
|
|
|
