|
|
|
|
|
|
LF050 codes with high resolution. With a wavelength 10 times shorter than that of a CO2 laser marker, high beam quality and superior galvanometer scanning technology the system marks with high resolution, fast, precise and with excellent legibility. LF050 works reliably and is easy to maintain. Thanks to it‘s efficient, maintenance-free laser source and the simple air cooling system. LF050 integrates easily, flexibly and quickly into any production environment. Thanks to it‘s dovetail joint with integrated fine height adjustment, a five meter detatchable fiber conduit and it‘s small and compact system design.
ALLTEC LF050 is THE laser marker for the electronics industry. The 5 W continuous wave fiber laser marker has been primarily designed to mark molded housings of discrete and integrated components as well as circuit boards, precisely, with high quality and in the shortest of time. Moreover, the LF050 is also suitable for marking foils, films, bags and composite packagings used in the packaging industries.
The range of information that can be marked is virtually unlimited, and can be applied both to stationary as well as to moving parts (marking on the fly). With the LF050 line widths well below 30 μm can be achieved, enabeling character heights of 150 μm and less.
|
|
Laser Marking System
S290
LaserPro S290 : Full Table Size Metal Marking System with the Largest Working Area
- Spacious 29" x 18" working area
- DC servo control for precise and rapid movement
- Superior engraving quality
- DPSS laser technology for metal and plastic engraving
- User-friendly features
- Auto power compensation
|
|
|
The PCB-1000 laser marking system implements in-line production laser marking of Printed Circuit Boards (PCBs) and PCB assemblies. Clean, permanent marking on panels and daughter-boards: company logo, lot, date and serial numbers, test and QA information, machine readable codes including barcodes and 2D data matrix, graphics, and more. Laser mark PCB materials, ceramic, plastic, and metal components.
|
|
General description
Application: Engraving the connectors on various sizes of computer circuit cards.
Features: This system is built around a 10 watt CO2 laser. The computer cards are hand loaded onto the infeed end of the belt conveyor and are marked as they pass under the focusing lens. The cards do not stop while on the conveyor. They pass through a series of pneumatic doors that are timed by optical sensors to open and close sequentially, assuring CDRH Class-1 guarding throughout the marking cycle.
|
|
JOLLY CO2 and JOLLY Nd: Yag
The winning solution for the horizontal marking and engraving operations with a CO2 laser on materials like wood, plastics , paper, fabric , rubber , marble and stones, metacrilate, leather and more others. The immediate “plug and play” installation with any machine or pre-existing production line and the best price/performance ratio on the market are the real “plus” of this solution, absolutely unique for flexibility. STRONG POINTS OF THE SOLUTION: - Versatility : Exceptionally compact and trasportable unit, easy to install...
|
|
|
|
|
|
Laser Marker ML-7112AH/AI
EASY ON YOUR WALLET, EASY ON THE ENVIRONMENT.
LD-pumped YVO4-Laser,
Low-Cost Laser Marker,
Born from the Needs of Our Customers.
Provides high laser beam quality at affordable prices
100 x 100mm Processing area
Includes LM-Draw application software
A market survey resulted in the following frequently asked requests
- "Make it more affordable."
- "Give us just the minimum of necessary functions without any complex features."
- "We prefer air instead of water cooling."
- “Give us the RS-232 interface for more flexible marking”
ML-7112AH/AI perfectly meets these needs as it offer the following features and benefits:
- Compact and lightweight
Ideal for production lines where space is limited.
- Energy efficient
Low power consumption, thanks to a highly efficient laser diode.
- Fully air-cooled
Maintenance is reduced to a minimum.
- Low maintenance
Except cleaning of the protection glass and two air filters no further maintenance is required. Depending on usage more extensive maintenance / replacement of consumables might occure after several years.
Application software LM Draw for creating and executing processing data.
- 2D code marking is standard
- Supports DXF file reading
- Auto hatching function
- Automatic write order optimization function
- Thanks to the strong drawing functions, processing data is created efficiently.
Guide light function
This function shows the work writing position and processing area.
Automatic backup function
The time and operation count can be specified and the operation log backed up automatically.
|
|
|
|
|
|
Définition produit (Anglais): YAG laser marking machines
Descriptif produit (Anglais): TD412
The diode-pumped laser TD412 is the best solution for high definition marks on plastics and metals
VERY HIGH MARKING QUALITY
- Excellent beam quality, due to diode endpumping, creates thin
marking lines
- Gaussian spot for optimum marking precision
- High resolution galvanometric scan head
- High quality spot for a perfect mark without any burrs
VERSATILE AND FLEXIBLE
- Wide range of settings to adapt the result to the need on a wide
range of materials
- Unparalleled marking speed up to 2,5m/sec for high productivity
- Easy integration on line or as independent marking solution
- High peak power for high contrast marking
TECHNICAL SPECIFICATIONS
- Type: ...................................... Diode-pumped Nd:YVO4 Laser
- Average power…...................12W
- Peak power……......................>25kW
- Wavelength……......................1064 nm
- Frequency range………......…from 5 to 200 kHz
- Fiber length……...................…3, 5, 10m
- Focal lens…….........................100, 160, 254, 330 mm
- Air cooling
WEIGHT & SIZE
- TD412 module............................L727xl139xh202mm, 7Kg
- UC412 control unit: ....................L483xl376xh221,5mm, 18Kg
|
|
|
|
|
|
Lamp pumped Nd:YAG Solid-State Laser Coder
ALLPRINT LN100A: High Performance for the best marking results
ALLPRINT LN100A meets the most stringent requirements regardless of whether throughput, flexibility, user-friendliness, reliability or economy is decisive for your application. No matter what has to be marked: all sorts of plastics or diverse metal parts. Wherever highest power is required at an economic price, LN100A is the most suitable system.
The solid-state system is designed for both stand-alone systems and easy integration into lines. It is capable of being completely controlled by computer and is predestined for use in fully automated production. The unique communications concept enables user-friendly and efficient administration of marking jobs with texts, machine-readable codes, graphics or individual data.
Whether as an engraving, color change, color removal or black marking – LN100A performs convincingly not least on account of its high resolution and brilliant marking quality.
High-speed marking: up to 30,000mm/s and 15m/s for on-the-fly applications, thanks to highest laser
power and fast digital galvanometer technology.
Broadest application spectrum thanks to powerful application software supports, excellent laser beam quality and high laser intensities due to adjustable mode aperture.
Highly flexible integration thanks to compact modules and a broad spectrum of beam-turning units. The unique controller and interfacing concept assure an unmatched integration flexibility.
|
|
|
ALLTEC’s new generation of diode- and lamp-pumped Nd:YAG laser marking systems convinces by an unprecedented combination of throughput, flexibility, user-friendliness, reliability, and economy.
|
|
|
Unitek Miyachi offers a wide range of standard, class I, turnkey systems for laser marking applications. Choose from manual, R&D type stations to semi-automated workstations designed for high volume part marking. Each workstation can accommodate up to a 420mm focal length optic. Custom systems also available.
|
|
|
|
|
|
Fully-automatic system for ‘UTC’ laser marking of beverage closures. The system is characterised by its compactness and the option of integration into existing production lines. The closures are fed fully automatically and in the correct position depending on the feed system selected. Depending on the layout of the feed system, closures with a diameter of up to 50 mm can be marked on the inside, but also on the outer surface (top).
They are transported by means of a vacuum band where they undergo ‘On The Fly’ marking. This significantly speeds up the whole process, since no processing time is wasted handling the products. The result is an extremely high marking speed of up to 1500 parts per minute. This depends on the material being marked as well as the text or logo.
A piece of software specially developed for the application called ‘TP_mix’ allows the user to deal with all common variants of marking of ‘UTC closures’. These range from simple logos to the marking of codes (unique message). The user can generate all these variants with great ease and, more importantly, with the level of security (passwords, logging etc.) required for this type of production.
|
|
|
|
|
|
Pulsed Fiber Laser Coder for Metals, Plastics and hard-to-mark Materials
ALLTEC LF100 & LF200: Small, flexible, reliable
ALLTEC LF100 and LF200 are small and compact, flexible, versatile and highly reliable for many applications in the electronics, automotive, tools and metal as well as aerospace, and medical devices industries. LF100/ LF200 are capable of static and on-the-fly marking on a variety of plastic, metal and other hard to mark materials with 10 watts (LF100) and 20 watts (LF200) of output power respectively. They provide an unrivalled compact mechanical design with one of the smallest marking heads of its kind and straight-out or right-angle beam exits for increased versatility in tight spaces (esp. in OEM machines). Less-frequent maintenance intervals and extreme reliability maximize uptime and reduce costs.
ALLTEC LF100/LF200 use a maintenance free, air-cooled Ytterbium fiber laser source instead of a gas laser tube or a laser rod which are used in CO2 gas and Nd:YAG solid-state laser coders. Both can quickly apply complex variable data such as high-quality identification matrix codes, bar codes, logos and serial numbers.
Additional advantages include further ease of integration due to the systems dovetail joint; the ability to decide for PC independent operation via a special software interface; the possibility to choose from a selection of languages displayed on the user interface (e.g. English, Chinese, Turkish, and many more) along with password-protected security levels provided by the flexible and proven Windows®-based Smart Graph™ software.
|
|
The Fibre200 is the ideal solution for high volume personalization.
Able to mark on both metals and plastics at unparalleled speeds in high resolution. A versatile machine providing permanent, black marking for optimum productivity. No additional consumables or external cooling system required.
Minimal maintenance needed, long diode life span (MTBF of 100 000 hours). Its speed and marking quality offer complete satisfaction.
Laser:
_Pulsed fibre laser: 1,064 nm
_ Average power: 20 w
_Peak power: 12kw
_Safety: CDRH Class 1 (EN60825)
Size and Weight:
_Casing dimensions: 590*827*806 mm
_Casing weight: 75 KG
_CCU dimensions: 483*184*376 mm
_CCU weight: 17 kg
|
|
Standard Features:
- 10-watt CO2 laser
- LaserGraf™ precision control software
- 16 bit high precision galvanometers
- Safety interlocked door
- Fume extraction port
- Computer, monitor, keyboard, mouse
|
|
Being a table top system, the NAUTILUS is suitable for stationary use as well as for mobile use. It operates with a conventional power of 230 V (110 V optional) and does not require any external cooling.
The classification laser class 1 means, the marking system has got the same safety requirements as a hifi system.
With the NAUTILUS you can mark almost any material – flat and shaped parts, standard marking tasks or serial numbers – this marking system simply offers you maximum fl exibility. Marking with NAUTILUS means high resolution and precision – great speed guarantees high effi cieny in your production process.
|
|
The table top laser marking system NAUTILUS opens up the possibility to benefit from an industry proven technology in a cost-effective way, even for smallest volume productions.
The compact table top system has a low weight and can be installed quickly. In spite of its enormous power, the NAUTILUS is easy to handle.
Due to the high resolution and precision of the NAUTILUS system, it is possible to perform quick and permanent markings on almost every kind of material.
Furthermore, the extraordinary housing of this table top system sets standards in terms of product design.
|
|
The Concorde is a computer controlled compact, self-contained CO2 system. This lightweight system, with its 360o rotating head, makes it easily integrated into a CDRH compliant enclosure.
Available in 10, 25, and 50 watt power
Long life CO2 tubes- 20,000 hours before recharging
Easy to use marking software included
High speed marking head with built-in error correction
Mark either stationary or optional "on the fly"
|
|
Our "WSM" workstation for all kinds of markings and engravings. Automatic processing of palletised jigs.
* Output power 8-50 W
* Maintenance-free, air-cooled, compact laser line
* Useable surface of the working chamber
max. 800 x 700 mm
* Laser class 1 housing design, DIN EN 60825.1
* Our "WSM" workstation for marking different plastics, metals and glass
* Ideal for the production of complex laser processes like deep engraving or glass marking.
* Once positioned, X/Y axes can be used to mark workpieces of different sizes and shapes in one go and with high repeating accuracy
Servo Z-axis, stroke approx. 260 mm
Servo X/Y-axis, stroke 300 x 300 mm
|
|
|
We manufacture laser systems with many laser wavelengths including- CO2, YAG, YVO4, UV Deep UV and Green. Control Laser produces the widest range of laser marking systems with over 200 configurations. Control Laser makes it's own beam stearing heads and we have 7 full time programs for our laser marking software. Control laser provides many types of enclosures and types of automation.
|
|
The ProWriterTM D25T is a 25 watt diode-pumped laser marker featuring a TEMoo beam profile. This compact laser system is ideal for specialized applications requiring a tightly focused beam with high energy density. The D25T marks a wide variety of marks on: metals, ceramics, composites, plastics, painted/anodized metals, and many others.
Features
Two Year Life Warranty (10,000 Hour Diode Pack)
Reduced Maintenance
Internal Stainless Steel Chiller
Lower Operating Costs
Improved Beam Density For Better Marking
Available in 4", 6" and 12" Marking Field
|
|
M655 - Laser Marking Machine
The efficient solution to lasermark medical and industrial parts, equipped with a laser of Trumpf Laser Marking Systems LTD.
Two marking stations:
- Station 1 with pallet
- Station 2 with automatic loading
|
|
Laser marking machine for piston pins type:
MÖ-BL-IN-016-H
Marking laser
VectorMark compakt VMc3 Trumpf-LASER
Wave length 1064 nm
Marking field size
120x120 mm
Lens
f = 163
Dimensions
2850x1460x2200 mm (LxWxH)
Workpieces
Shark made from aluminium pressure casting
Stroke
400 mm via motor
Lift doors
pneumatic lift 200 mm
Feeding
conveyor with separation, adjustable side guidance
Handling of the cabin
Pneumatic feed
Outlet conveyor
Conveyor with ramp adjustable side guidance
Options
Vacuum extraction system
Data-Matrix-Code camera
Mobile Stations
|
|
|
|
|
|
LP-300 series
Due to a wavelength in the lower infrared range, SUNX's LP-310-C Laser Marker is perfectly suited to permanently mark resins, enamel surfaces, glass and organic materials such as paper, wood, rubber or leather.
In comparison to conventional printing processes such as inkjet printing or tampon printing, the laser marker system is a purely optical tool that does not come into direct contact with the material it is marking. Hence it is not subject to wear and tear and requires no additional consumables such as toner, ink or solvents.
In addition to its superior marking quality with clear contours, the LP-310-C is nearly maintenance-free and hence produces few service or follow-up costs. Since it requires little space and due to its robust construction, the CO2 laser marker system can be easily integrated into assembly lines and individual workstations.
The powerful, user-friendly Windows software allows you to easily enter, edit or save texts and functions such as counters, date code and lot marking. You can easily import company logos and product specifications as graphic (DXF) files. In other words, the LP-310-C is suited to perform nearly any marking task you require.
|
|
|
|
|
|
e-SolarMark CO2 Laser Marking System
Code in stationary or on-the-fly modes on a wide variety of materials
- No consumables, low maintenance
- Compact and modular design
- Choose from 3 interface selections
- Versatile data communication options
- 21 CFR Part 11 compliant
The new e-SolarMark CO2 laser marking systems are available for standard and washdown applications. With no consumables and an average life of 30,000 working hours, these systems provide efficient coding of alphanumeric texts, dates, timers, serial numbers, bar codes, 2D codes and graphics on a wide range of materials. Right out of the box, Solaris Laser systems can be setup for both stationary and on-the-fly installations.
CO2 lasers can be used to mark materials such as cardboard, coated metals, glass, leather, paper, plastics, and wood. Applications for the new e-SolarMark include snackfood, beverage containers, cartons, candy and others. As a standard feature the new systems have the ability to turn text/codes 90 degrees and print horizontally or vertically anywhere within the entire marking area.
|
|
Designed with a combination of affordability and high quality, the Epilog Helix 24 features a 24" x 18" (610 x 457 mm) engraving area, and it features the highest engraving and cutting quality in the industry.
- Wattages: 35, 40, 45, 60 and 75 watts
- Work area: 24" x 18" (610 x 457 mm)
- Z-stroke: Holds items up to 11" tall (279 mm)
- Included features: Red Dot Pointer, Air Assist, Auto Focus, Integrated Vector Grid & Vacuum Table, RadianceTM High Energy Optics
- Options: Epilog Air Compressor, Rotary Attachment, Vector Pin Table
|
|
|
|
|
|
PIRANHA Laser marking system
- Our compact class - mobility in a small space
- Maintenance free diode pumped laser with the highest radiation quality
- Excellent price-performance ratio
- Suitable for marking parts made of metal, plastic, ceramics, carbides,
compound materials and much more.
- Can be equipped with the unique Live-Adjust-System
System
The laser system of the PIRANHA class offers high power and quality in a small space. The mobile system has space in the workshop, office or warehouse. Water cooled laser source up to 80 Watts power with high speed marking heads and precision optics guarantee the best processing results with short process times.
Applications
The PIRANHA is excellently suitable for marking on small and middle-sized pieces. Circular marking, serial numbers, barcodes, 2D codes, logos, plaintext or design elements can be precisely and permanently made. Tools, advertising material, machine parts, components, watches, jewelry and many other things from differing materials are processed by the PIRANHA on the surface or the edge.
Software
Versatile, fully graphic, based on Windows XP, you can realize your marking tasks with the ACSYS software in the twinkling of an eye. "What you see is what you get" - especially conceived for flexible procedure programs, small series or individual pieces can be produced economically. In connection with the optimal Live-Adjust-System, all wishes will be fulfilled.
|
|
|
The FiberMark G1 is a a breakthrough in laser marking technology. Epilog has taken its fiber laser technology and designed a galvo unit that produces amazing engraving speed. Using our exclusive OpenArc™ driver interface, you can print directly to the FiberMark G1 without having to convert your artwork or learn any proprietary software!
|
|
|
Our Fiber Lasers provide a wide choice of pulse durations, repetition rates and peak powers. These lasers deliver a high power 1064nm laser beam directly to the work site via a flexible metal-sheathed fiber cable. Collimated, and then typically focused to a spot size of a few microns or less, the near diffraction-limited beam can mark, drill or machine a variety of materials.
|
|
|
Multipurpose laser marking can be used for a wide variety of applications. Ornamental or identification engraving, either surface or in-depth, this technology can be used on most materials (ferrous metals, non-ferrous metals, plastics, wood, ceramics...).
|
|
Among the compact laser systems, it is the Plus that sets new standards in its class with regards to its features. It can be used for industrial coding on plastic, varnished and anodised metal, glass, paper, coated and printed cardboard, plus many other materials.
As standard, the K-1010 Plus includes an Ethernet interface and a high-speed marking head.
The marking area can be extended to 250 x 250mm simply by changing lenses. Even particularly difficult requirements, such as compliance with 21 CFR Part 11 in the pharmaceuticals sector, can be met with this laser system.
It can be operated via a handheld terminal device incorporating the Marca PC Software, direct via a PC, or a AllenView (Touchscreen terminal).
The K-1010 Plus can be used in static or dynamic coding as a standard feature. The beam exit can be selected at either 0° or 90°. The K-1010 Plus does not require a additional external control unit.
|
|
|
|
