|
|
| ... products without technical information |
| |
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables. We have 11 models of Broadband Current Probes. Please vist our website for more details. www.AHSystems.com
|
|
1. TL-10 High voltage probe test leads.
2. TL-20 HV lead with alligator clip.
3. TL-115A Nema 5-15 (115V outlet) test adapter.
4. TL-IEC HV test lead with 3 pin IEC receptacle.
5. TL-2 Two wire ground bond 30A test leads. ' "G " version has 30 A rated return lead. |
|
1. TL-10 High voltage probe test leads.
2. TL-20 HV lead with alligator clip.
3. TL-115A Nema 5-15 (115V outlet) test adapter.
4. TL-IEC HV test lead with 3 pin IEC receptacle.
5. TL-2 Two wire ground bond 30A test leads. ' "G " version has 30 A rated return lead. |
|
| The LEAP Si™ Metrology System is a high-performance atom probe microscope providing 3D, atomic resolution, compositional imaging and analysis to research and industry. Materials are examined by removing and analyzing individual atoms. Atoms are removed by a combination of a high electrical field and either: (1) an ultra-fast voltage pulse or (2) an ultra-fast laser pulse. The LEAP Si employs patented innovations that unlock the power of the 3D atom probe to address previously unsolved measurement challenges in semiconductors, material science, and nanomagnetics. Key features include: largest field of view, highest data rate, excellent mass resolution, and simplified sample preparation using microtip arrays. With the LEAP Si measurements that would have taken months, or been completely impossible, can be accomplished in a matter of hours. |
|
Innova SPM
The Innova scanning probe microscope (SPM) delivers high-resolution scanning and a wide range of functionality for physical, materials, and life sciences, all at a much lower price than comparable systems. Innova scans from sub-micron levels up to 90 microns, with proprietary closed-loop scan-linearization that approaches open-loop levels, all without the need to change scanner hardware. The integrated high-resolution color optics and programmable, motorized Z-stage make finding features and changing tips or samples fast and easy. The Innova's high-end functionality, compact footprint, and moderate cost make it one of the best value SPMs available today. |
|
| ... products without technical information |
| |
There is only one way to get ahead - advance.
The new FARO Laser ScanArm V3!
The new FARO Laser ScanArm V3 offers numerous new and improved features and several advantages in conjunction with the new Quantum FaroArm - making it unique on the market for measuring machines.
The FARO Laser ScanArm enables users to inspect parts in detail by capturing huge point-cloud data. Its open architecture enables the user to employ Geomagic, Polyworks, RapidForm and many other third-party software programs.
In conjunction with the right software, the FARO Laser ScanArm V3 tackles all measurement tasks such as inspection, point cloud-to-CAD comparison, rapid prototyping, reverse engineering, and 3-D modeling. Its main benefits are the exact scanning of reflective and dark objects - the biggest challenge for all scanning systems.
The new FARO Laser ScanArm V3 is compatible with the Quantum FaroArm, the Platinum FaroArm and the Fusion FaroArm.
Advantages of the FARO Laser ScanArm V3:
» NEW – up to 30% more accurate: New Laser Line Probe V3 up to 30% more accurate than V2
» NEW - improved surface scanning: Higher performance when scanning dark or reflecting surfaces
» NEW - Smaller & lighter: Improved ergonomics through 30% weight reduction compared to V2
» NEW – Faster warm-up: 50% faster warm-up time compared to V2
» Integrated 7th axis - Higher flexibility: No external electronics and fixtures
» Ergonomic handle: Easy to handle
» Cable-free scanning: The Laser Line Probe is compatible with Quantum FaroArm's Bluetooth® technology |
|
G-SCAN RX 2 is a 3D scanning probe for reverse engineering and inspection of complex forms. G-Scan RX 2 gives you minimum engineering downtime compared to all other traditional contact measuring tools.
G-Scan RX 2 is compatible with all Ethernet generation ROMER measuring arms.
G-Scan RX 2 is running with a standard 6 axis arm thanks to an integrating rotating axis inside the camera. Compatible with all existing reverse engineering and surface inspection software |
|
| ... products without technical information |
| |
The MHM and MHC series of feedthroughs were designed to produce a leak free method of passing multiple probes or conductors (MHM and MHC) from ambient through to process conditions. Glands are available to carry upto 16 tubes or probes through a single fitting and elements in both metric and imperial sizes from 0.5mm (0.020") to 3.2mm (0.125")
The bodies of these feedthroughs are machined from 316L stainless steel and leak prevention is based upon soft sealant technology using Teflon®.Viton®, Neoprene, Lava & Grafoil®. All sealents are re-usable apart from Lava. Various thread forms and process connections are available including NPT, BSP, weld-neck and Tri-clover hygienic flanges.
|
|
Electrical Feedthroughs:
Nor-Cal's extensive line of electrical feedthroughs are manufactured from ultra-high vacuum grade materials such as high alumina ceramic insulators, OFHC® copper and nickel conductors, and 304 stainless steel flanges. These robust ceramic to metal feedthroughs have electrical ratings for operation with one side in dry atmosphere while the opposite end is in a stable vacuum. They are used in ultra high vacuum systems with CF flanges or high vacuum systems with NW flanges. CF feedthroughs can be baked to 450°C and NWs to 204°C with maximum system pressure of 1 x 10-4 Torr. Our product line consists of the most commonly required feedthroughs for general vacuum applications. Customs designs or modified standards can readily be supplied. |
|
The PG series of feedthroughs were designed to produce a leak free method of passing a single probe or conductor from ambient through to process conditions.
The bodies of these feedthroughs are machined from 316L stainless steel and leak prevention is based upon soft sealant technology using Teflon®. Various thread forms and process connections are available including NPT, BSP, weld-neck and Tri-clover hygienic flanges.
Applying the correct torque to the gland cap nut will ensure a permanent leak free seal without damage to the probe or conductor. Following the removal of a probe or probes for calibration the sealant can be re-used.
Where it is necessary to remove one or more probes (perhaps for operational reasons) when using multiple probes, normal sterilising procedures can still be maintained by fitting the vacant positions with an EGB. This is fabricated in 316L stainless steel to the same diameter of the absent probe. It is constructed with a larger diameter on the chamber side to prevent movement of the blank through the sealant when exposed to chamber pressure. |
|
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software. |
|
| ... products without technical information |
| |
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software. |
|
| ... products without technical information |
| |
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software. |
|
| ... products without technical information |
| |
Measure the mass of air ingested by a gasoline or diesel engine using hot wire anemometry. The concept is simple; the implementation is unique.
At the heart of the design of Delphi's Probe Air Meters is a platinum-based, glass-coated, heated sensing element. The element is a low mass, quick responding device used in a bridge circuit configuration. It is very robust to damage from dust impingement. Delphi's Probe Air Meters feature a patented dimpled flow management pattern that provides more consistent air flow across the sensing elements, enabling outstanding performance in application-specific ducting.
Delphi's family of Probe Air Meters includes:
· Probe Single for unidirectional air flow applications
· Probe Dual features two heated sensing elements
· Probe Bypass for 4- and 5-cylinder turbo engines
Delphi has delivered more that 40 million air meters since 1993. |
|
High precision dual polarization near field measurement systems place stringent performance requirements on the probe performance in terms of pattern shape, on-axis and off-axis polarization purity, return loss and port-to-port isolation.
SATIMO has developed different families of high performance dual polarized probes covering the entire range from L to Ka band. Due to the extensive use of balanced feeding techniques, all probe designs have outstanding bandwidth.
|
|
|
