|
|
PROVASET 2P is an electro-pneumatic leak tester dedicated to perform pressure decay leak tests. It makes possible to tests, at bench, rigid or plastic products of small and medium size.
* Compact size
* Inox steel covers
* Graphic display 128x64 backlighted
* Wide Range power supply
85 ÷ 264 Vac - 47 ÷ 63 Hz
* Reliable pneumatic circuit
* Test pressure up to 6 bar
* Pressure resolution 0.1 mbar
* 16 tables of test parameters
* Passed/failed tests counters
* External commands interface
* Compliance to CE standards
EN61010-1, EN61326
|
|
The analysis of the market and the continuous technological development allow to obtain a product that is excellent in appearance, design and electronics.
The leak detector ET99W represents the best solution on the market in terms of precision, reliability and tests execution speed.
It is particularly indicated for end production line test in automotive, mechanical, foundry, packaging, medical and wherever leak test is requested to carry out controls.
The instrument detects leaks thanks to the “pressure drop” principle, (the method is recognized by UNI EN 1779): at the beginning it pressurizes the piece and after an arrangement time, it finds the pressure decay.
ET99W is suitable for empty or pressure tests and it is available in operation scales from - 1 to 25 [ Bars ].
This new seal control on decay pressure instrument is able to find with precision and reliability the smallest leak-off rates in the short time possible.
It is the ideal instrument in order to control and certify Your production.
|
|
The LTC-502 leak test computer is the startup model in our successful LTC leak tester series. The LTC-502 enables the complete functionality of the PC to be used for rapid and precise measurements of pressure differences and flow, even in extreme situations.
The integrated PC leaves nothing to be desired when it comes to user-friendliness. The future-oriented control using one button is intuitive and easy to operate. Inputting errors are prevented. In addition, all parameters can be easily manageable, so the subsequent assessment of the measuring processes can be carried out without difficulty.
The LTC-502 communicates directly with all the peripherals for transfer, management and analysis of
data and machine control. The test process becomes noticeably more efficient. Another technological innovation is the unique analog module with the 24-bit A/D converter. The module enables an unequalled detailed discrimination of the measuring signal. This means that a huge amount of extra information is available for monitoring the measuring process and ensuring that the measurements can be reproduced as accurately as possible.
Considering the outstanding measuring concept and the wide range of different functions, the LTC-502 is on sale at a particularly attractive price. This makes it an investment with an assured future on all fronts.
|
|
Without any doubt the smallest high-performance leak detector on the market.
Specially adapted for automatic or semi-automatic test machines, the F520 has
a full range of specifications at a very competitive price.
|
|
SDT LeakTESTER
Leak testing by measuring mass flow
The SDT LeakTESTER operates on the principle of Mass Flow for manual or automatic testing of any component which must meet rigid tightness criteria, such as taps, catheters, pouches, flasks, packaging, bottles, syringes, cartridges, cooling circuits, shock absorbers, etc.
- Tightness is measured by recording the flow of gas (air, nitrogen, etc.), not the difference in pressure, between the reference volume and the piece being tested. A measurement is made of the flow rate in a flow sensor (mass flow sensor).
- Integration of the SDT LeakTESTER into the production chain is accompanied by the installation of pneumatic equipment whose control valves are opened and closed by the SDT LeakTESTER itself.
- The SDT LeakTESTER is a centralised electronic measurement unit which provides simultaneous automatic testing for leaks of 1 to 8 pieces generally as they emerge from the manufacturing process.
Unlike the method commonly used to measure a drop in pressure (pressure decay or delta-p), the SDT LeakTESTER also meets the growing demands of all manufacturers: Large range of measurement , fast measurement and versatility.
|
|
Delta Rack Plus allows to perform pressure decay leak tests on automatic system and it is designed to meet the requirements of assembly equipment, with multiple test point, managed by PLC and/or Personal Computer.
Delta Rack Plus directly manages test times and pressures, the user must provide the external pneumatic circuit with filling and drain valves and pressure transducer.
Tecna supplies customized pneumatic modules upon request.
A programmable PLC controller can start the test with a single digital output and read the test result with two digital inputs.
A serial line is available for the supervision from the Personal Computer.
Delta Rack Plus is available in many versions and may be customized for any kind of test cycle and line pressure exigency.
* Leak test up to 6 bar
* Pressure resolution 0.1 mbar
* Panel instrument, for 3U rack assembly
* External pneumatic circuit
* Automatic test cycle
* Control of filling and drain external electropneumatic valves
* Passed and failed tests counter
* Pressure reading from the external pressure transducer
* Pressure measurement with scale selection mH2O, mbar, kPa, psi
* An aided procedure making it possible to calibrate the pressure sensor
* RS485 / RS422 / RS232 / Current Loop opto-isolated serial line with controls for computer monitoring with MODBUS protocol
* Opto-isolated interface with PLC
* Four tables of test parameters selectable from keyboard / PLC / serial line
* Test START and RESET controls from keyboard / PLC / serial line
* PASSED - FAILED - TEST IN PROGRESS - MACHINE ERROR outputs for PLC
|
|
Ultrasonic system SDT 170 MTT
Tightness control of underground tanks and associated pipe work
Widely recognized and approved method. The SDT TankTEST method by introducing a vacuum and listening to the ultrasounds is the most reliable, most cost-effective, most rapid, most simple, most comprehensive and the most accurate.
With SDT's Graphs & Measurements software for the automatic creation of authenticated reports. All data and test measurements are stored in the detector. They can be transferred to a PC. They provide evidence of testing, measurement readings and graphics
and archiving of the performances.
Control principle
- The use of ultrasonic frequencies means a far higher level of sensitivity than is possible with audible sound.
- The pressure in the tank is reduced, and the ultrasonic vibrations caused by the passage of water, air or other substances through a hole in the tank wall are detected by two sensitive sensors, one in the liquid and the other above the level of the liquid.
- The SDT 170 MTT detects the typical frequencies of leaks in underground tanks. It measures them and converts them to audible frequencies. These are fed back in three forms: visually and measured in dBµV on the detector display, and audibly through his headphones.
|
|
The Leak Test Computer Controlled Test System LTC-602 is representative for our-state-of-the-art tests for pressure differential and flow measurement systems. This product provides a scientific, reliable, exact check of anything, ranging from individual parts to complete machines, that have been molded, blown, welded, glued, and screwed.
Our long years of experience with leak test assignments, perfected compression systems, and the most modern embedded PC technology offer robust advantages for practical uses. The LTC- 602 line of diagnostic machines includes standard and specialized measuring devises like pressure increase detectors and pressure decrease detectors, as well as single, multiple, and combination test devises from the above measuring procedures.
|
|
| ... products without technical information |
| |
Flo-Check USB represents the next generation of hydraulic test equipment. This technologically advanced device simultaneously measures flow, pressure, temperature and power within a hydraulic system. Data is displayed and logged through a custom Windows®-based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The unit is bi-directional, provides an accuracy of ±1% of full scale, and includes a low-resistance load valve and internal pressure relief discs.
The Flo-Check USB Hydraulic System Analyzer can be used as a stationary or portable tester for both industrial and mobile hydraulic system diagnostics, and analysis of the prognostic health of a hydraulic system. It features flow, pressure, and temperature sensors that are monitored by a data acquisition module. This module records the operating parameters of the system and transfers them to the user’s laptop via the USB port. It can log up to 12 hours with option to capture data manually or continuous monitoring. Data can be exported to Microsoft Excel® and other spreadsheet programs.
Flo-Check is powered through the USB port of a PC, making it easy to setup and ideal for portable applications. Interfaced to the PC application, the device offers a straightforward method of monitoring system parameters complete with data acquisition.
|
|
|
Flo-tech portable testers are the leaders in state-of the-art hydraulic testing equipment. Offered in three models in a variety of sizes, the compact testers are designed for fast, diagnostic troubleshooting of both mobile and stationary hydraulic systems and components. The PFM6 measures flow, pressure, and temperature simultaneously from one point, while the PFM8 series provides an additional dynamometer for power calculation (HP and kW). In addition to portable testers, Flo-tech manufactures a wide variety of in-line turbine flow meters for hydraulic fluids.
|
|
Used to diagnose faults in hydraulic circuits, determine hydraulic horsepower and test for component wear such as hydraulic valve and cylinder leakage. Lake's analyzer consists of a flow meter, glycerinefilled pressure gauge (Style "K"), bi-metal temperature gauge/dry pressure gauge (Style "T") and a precision needle-type load valve. A comprehensive operator's manual describes testing of various system components.
|
|
An extremely user friendly, benchtop 2 cassette in-line Bright Light Station. Perfect for detecting all types of defects on wafer sizes 100mm - 200mm. Needs only power and vacuum connection for instant inspection.
Unrivalled Specification:
Intuitive Embedded Recipe Manager, allows:
Multiple Inspection Phases
within a recipe
Inspection Recipes stored locally
100mm - 200mm ready
Multiple Light Sources:
UV
Halogen
Monochromatic
Fibre Optic "spot"
Small Footprint
Wobble Chuck with joystick controls for:
Tilt X
Tilt Y
Rotation Direction
Rotation ON/OFF
Rotation Speed
Reject/Accept Options
2 cassette stations
Benchtop system
|
|
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
