|
|
Ultrasonic sensor for continuous level measurement
Especially suitable for measurement of solids with optional swivelling holder for optimum adaptation to the vessel geometry and material cone
All advantages in an overview:
- transducer of PA with stainless steel diaphragm (316L) and integrated temperature sensor for correction of the running time
- sensor in compact version or with separate transducer
- accuracy 10 mm
- ECHOFOX signal processing with Fuzzy-Logic
- adjustment with PLICSCOM, HART handheld or PC
- instrument from the plics family
Measuring range: liquids 1 ... 25 m; solids: 1 ... 15 m
Process fitting: flange with optional swivelling holder
Process temperature: -40 ... +80 C
Process pressure: -0,2 ... +0,5 bar (-20 ... +50 kPa)
|
|
UFAR Ultrasonic Analog Sensors, chemically resistant
- Type: UFAR
- Measurement ranges: Sensing range 100...1000mm
- Type of protection: IP65
- Connecting head / Material: 86 x 149 mm, Stainless steel
- Output signal: 4...20 mA (20...4 mA) via M12 plug
|
|
|
The ITC-9071 92 kHz air transducer is designed for a variety of ultrasonic sensor products. Its narrow beam makes it a good choice for demanding proximity, position, and level sensor applications. It can be used as a transmitter, receiver, or both as needed, and is equipped with an aluminum housing.
|
|
The product range Iowafe belongs to the most compact ultrasonic level indicators which are existing. Thecompact construction speaks for itself with a variety at free programmable parameters which can solve specific customer's need in a simple way.
Function possibilities
- Death band only 200mm
- Measuring range up to 25m
- Programing modul with LCD indicator
- Hart-Programmable
- Quick Setup in 5 steps
- Cennection sizezfrom NPT / R 1.5" on
- With stainless steel flange also for CIP applications
- 2-wire / 4-wire applications
|
|
For liquids
Contact 1 electronic switch
Connection G 1male
Material st. st.
Max. pressure 70 bar
Max.temperature 125C
|
|
|
|
|
|
The LMC-F-0050-1 is an opto-electronic level measuring module for industrial application like tank level measurement. The module operates on basis of non-contact comparative phase measurement with amplitude modulation. The laser diode (cw operation) has a divergence of 0.6 mrad for measurement with pinpoint accuracy. The measured result is available on the RS 232 / RS 422 data interface. Optional also Profibus, Canopen, Ethernet or WLan Interface are available. A digital switching output (second as option), an analogue 4..20mA output and optional a Profibus output is also available. The sensor alignment can be easily achieved with the help of the red pilot laser. The Measuring range is on any natural surface between 0,2 to 30m, for 30 to 100m it depends on the surface reflectivity coefficient.
Features:
- Laser class 2 for eye safe operation
- Non-reflector measurement
- Millimetre accuracy measurement on any surface
- Easy installation and commissioning
- Allows field bus integration (Profibus).
- Meets IP 66 protection class for industrial use
|
|
Sludge Finder - effective sludge level detection and control :
Sludge Finder is a reliable, effective sludge interface monitor. A single controller may be used to measure up to four tanks. Sludge Finder uses an underwater acoustic sensor to provide continuous, reliable sludge level detection that lets you reduce pumping, optimise dosing and gives staff time to concentrate on other things.
|
|
Radar Level Meter for distance, level and volume of liquids, pastes and solids
OPTIWAVE
works better than any radar ever before.
In contrast to earlier radar devices, the new OPTIWAVE with its more advanced design solutions is able to operate over a larger bandwidth. This ensures a sharper resolution and higher accuracy. The higher signal dynamics of OPTIWAVE allow the detection of even the smallest level changes.
|
|
* LST-500 Level transmitter :
A stainless steel version of its continuity output ESS, specifically for use in food industry applications. And is suitable for applications, requiring more precise level sensing than that provided by multipoint switches. And can be fitted externally 2NPT connection or externally an flange. The operating temperature range is -30to +125. The working pressure is 1.0 to 2.5 Mpa, testing rod length is 500mm. LCD disply, Providing a continuous output 0~5Vdc or 4~20mA.
* LST-1000 Level transmiter :
New developed a stainless-steel version sensor, its continuous output signal is (0~5Vdc or 4~20MA), the sensor combines the proven reliability of magnetic reed switching with resistors net worked to provide a variable output proportional to the float position (Liquid level). Testing rod length is 1000mm, standard flange mounting.
|
|
Continuous level measurement over a measuring range of up to 8 meters
The Tower-Sens is a rod detector based on the well-known level gauging system LB 490 Uni-Probe. It has been designed specifically to monitor large measuring ranges.
With only one electronic unit and only one flameproof-housing, the Tower-Sens is significantly more economical than systems comprising several short, cascading detectors. Moreover, the wiring efforts and the risk of complete system failure are drastically reduced.
The combination of good value, reliability, accuracy and low source activity make the Tower-Sens the ideal solution for measuri
|
|
Ultrasonic Liquid Leveller
The Link Instruments ULLC2001 Ultrasonic Level Comparator is one of the most advanced Liquid Levellers on the market. Both extremely easy to use and micro-pic controlled for greater precision in measurement. The transducer is placed against the cylinder body 120mm below the calculated liquid gas level, (normally mathematically calculated). While retaining the transducer at this point the Comparator's ultrasonic level is set to around two or three divisions / bars-, by use of the 0-10 Tune Control. This gives a reference level against which the signal at the gas level / air interface is compared.
By slowly sliding the transducer up the cylinder body, you will arrive at the gas level / air interface. At this point the signal will rise sharply and this is visible on the Comparator usually as all 16 divisions / bars- appear and is due to the enhanced propagation of the Surface Acoustic Wave (SAW), across the liquid gas.
|
|
FLOMOTION 600B Ultrasonic level meters from Flomotion Systems are designed for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 800C Explosion Proof
Ultrasonic level meters from Flomotion Systems are perfect for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 1100 Ultrasonic level meter
Excellent for tank level or contents measurement of liquids or bulk solids.
FLOMOTION DR5000 SINGLE & DUAL PEN CHART RECORDERS Offers the best of both worlds, ink cartridge or thermal printing.
|
|
MUW-Mini Ultrasonic Level Monitor
The MUW-2000, an ultrasonic level monitor, is a small but high-cost performance level monitor in use of ultra sound. It has a compact and clean body made of polypropylene. It is suitable for level management of pure water and/or chemical substances. 4 to 20 mA DC current output, two alarm output for high and low level detection as well as RS232C output for maintenance are standard outputs. MUW-2000 enables you simple and easy level monitoring and controlling.
|
|
Radar EM540: the suitable solution for tank barges, inland river and ocean going vessels
The 8" EM540 radar is especially designed to be integrated within a dedicated cargo monitoring system for inland river or ocean going vessels and tank barges.
The EM540 radar is based on the use of smart sensors including microprocessors performing signal processing. In addition to transmitting tank level, pressure, and temperature data to the central monitoring system, it offers such capabilities as self-diagnostics, self-monitoring and remote configuring.
The use of an intrinsically safe two-way digital signal transmission, between the radar and the central monitoring system, provides for an easy integration of the EM540 Radar into any type of control system.
|
|
Enrafs SmartRadar FlexLine combines modern technology with maximum flexibility. The basis for this is formed within Enrafs new FlexConn architecture which enables the tank gauging system to precisely synchronize with your application environments and requirements.
The complete digital signal processing technology, the optimum connectivity and the compact, innovative planar antennas make the SmartRadar FlexLine the ultimate measuring system.
Not only does the SmartRadar FlexLine prove its flexibility on installation, but also the level measuring system has no equal. Our new Enhanced Performance Signal processing makes it possible to measure level with extreme precision under the most difficult circumstances!
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
