|
|
EE Electromechanical Level Measuring System
Microprocessor based controller
Standard measuring range of 45M, with maximum of 70M available
Different types of sensing weights to choose from
Alarm output for sensing probe buried and probe wire broken condition
Application:
ore, clinker, coal, cement, grain, plastic powder, feedstuffs, granule, and any liquid |
|
Designed to remain non-intrusive, the Sentry SR offer viable alternatives in demanding applications where other technologies fail.
The Sentry SR Series of professional lasers are the latest in laser technology designed for both level and positioning applications. The Sentry SR operates up to 25 m and is housed in a rugged, explosion-proof enclosure.
|
|
Portable open electronic gauge
The UTImeter Otex is a portable liquid level caliber designed to be operated under open conditions on petroleum and chemical tanks where open gauging is permitted. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature probe is a RTD element. The characteristics of the RTD are stored inside the sensor. The sensor is sending true temperature values to the electronic box. Therefore changing a sensor or a tape does not require a new calibration. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. The HERMetic UTImeter Otex is set on the open gauging hatch.
The unit enables 3, optionally 4 measurements in one single operation
- Ullage
- Temperature
- Oil-water interface level
- Innage, Reference height (Visc Version) |
|
Features:
- Discontinuous level measurement for nearly all kinds of bulk goods and interface measurement
- Simple and reliable measuring principle
- Sensor weights in various designs suitable for every application
- Insensitive to dust, dielectricity, conductivity, humidity, caking
- Easy installation, maintenance-free operation
- Very precise results covering large measuring ranges
- Suitable in hazardous locations (dust explosion)
- Detection of solids in liquids |
|
Buy plastic float switches below $5.00!
Our FS01- is an economical choice for many general applications.
Polypropylene Float Switches offer an economical solution for general applications and are also good for many acids where chemical resistance is important.
Nylon Float Switches with Buna-N Float are ideal for petroleum oils and other fuel applications. This highly bouyant float switch is designed to be used in fluids with specific gravity of .5 or higher.
View the SMD "Application Notes" to check chemical compatability and specific gravity for your fluid. |
|
SMD Fluid Controls is focused on providing customized manufacturer of float switches and liquid level sensors suppliers at the costs of others standard products.
Click "More info" below, select the desired part and "Configure" your own part and we will be sure to give you quick and personal response. It's That Easy ! |
|
Pulsarpoint 600 - non-invasive point level metering :
The Pulsarpoint 600 is ideal for situations where it is undesirable or impossible to make an entry into a liquid storage vessel, yet for example a high level alarm is required. Simply fixing onto the outside of the vessel, the Pulsarpoint 600 operates as an acoustic monitor, ultrasonic soundwaves being transmitted through the wall of the professional tank to detect the presence or absence of liquid. |
|
Sludge Finder - effective sludge level detection and control :
Sludge Finder is a reliable, effective sludge interface monitor. A single controller may be used to measure up to four tanks. Sludge Finder uses an underwater acoustic sensor to provide continuous, reliable sludge level detection that lets you reduce pumping, optimise dosing and gives staff time to concentrate on other things. |
|
| Pulsar's innovative dB range of transducers has taken ultrasonic level measurement into a new era. Unlike the high voltage, frequency dependent transducers of other manufacturers, which require special, protected interconnect professional cables, or low powered transducers built with intrinsic safety rather than performance in mind, the dB series combines low electrical power that meets intrinsic safety requirements with extraordinary high sonic power to give range and performance. |
|
| The Pulsarpoint 200 series range of point level measurement systems offers the very latest state of the art technology applied to the well respected vibrating blade principle of operation. All units in the range are manufactured to the highest standard from 316 solid stainless steel for maximum strength durability and corrosion resistance. Series 200 provides highly reliable, fixed point level indication or control with a repeatability of 1mm or better. Versions are available to measure solids and slurries with relay output. The Pulsarpoint 200 series uniquely combines solid rugged construction with high sensitivity to produce maximum reliability. The unique blade design allows 'tip sensitive' control and the unit does not react to troublesome material build up on vessel walls. Standard units may be extended using fixed or flexible extensions to suit the application. |
|
| Measurement Specialties' Ultrastable transducers are packaged for liquid level measurement. The LM series mounts externally onto a tank, and the LP series is fully submersible in water or corrosive liquids. |
|
| Although the following packaged manufacturers of accelerometers are designed specifically for automobile safety testing, they may be used in a wide variety of other applications. Key features of these piezoresistive MEMS sensors include DC response, bridge output, wide measurement range, internal damping, and convenient user interface. All accelerometers come with integral cabling assembly with or without custom connectors suppliers. Performance advantages of our piezoresistive MEMS sensors are wide bandwidth, high resolution, and good shock survivability. |
|
| ... products without technical information |
| |
AMO's proven and original technology for length and angle measurements uses techniques for scanning high precision graduations
consisting of structures photo-lithographically etched onto steel. Based on this, inductive transducers and integrated evaluation electronics
(in ASIC) have been developed further, to create a new and powerful generation of industrial measuring systems.
® The AMOSIN angle measuring systems are open hollow-shaft measuring systems, and generally therefore do not have their own
manufacturers of bearings, nor do they require any couplings for mechanical connection.
® Operating entirely on an inductive basis, the AMOSIN systems achieve high precision figures as close as +/- 5 µm arc length, but
are nevertheless ver y well able to resist environmental influences such as dust, humidity and so forth, and also feature extremely high
resistance to shock and vibration.
The high precision is mainly due to the procedure used to manufacture the rigid steel measuring ring, and to the exceptionally high
quality sensor signal, with deviations in the sine wave down to < 0.1 % harmonic content, as a measure of the achievable interpolation
precision within the grating pitch. |
|
Angle industrial encoders
The term angle encoder is typically used to describe encoders that have an accuracy of better than ± 5" and a line count above 10000. These devices are used in applications such as NC manufacturers of rotary tables, swivel heads of unit tools, dividing apparatuses, high-precision angle measuing tables, precision devices in angular metrology, professional antennas and telescopes.
Shaft encoders
Rotary encoders from HEIDENHAIN serve as measuring sensors for rotary motion, angular velocity and also, when used in conjunction with mechanical measuring standards such as leadscrews, for linear movement. Application areas include electrical motors, machine tools, professional printing machines, woodworking machines, textile machines, professional robots and handling devices, as well as various types of measuring, testing, and industrial inspection devices.
With incremental angle encoders and rotary encoders, the current position is determined by starting at a datum and counting measuring steps, or by subdividing and counting signal periods. Incremental encoders from HEIDENHAIN feature reference marks, which must be scanned after switch-on to reestablish the datum. Incremental rotary encoders with commutation signalssupply the angular shaft position value - without requiring previous traverse - with sufficient accuracy to correctly control the phases of the rotating field of a permanent-magnet three-phase motor.
|
|
The RESR and SiGNUM%u2122 RESM angle industrial encoders feature a ±5 arc second professional scale graduated axially onto a stainless-steel ring. Available in a range of 20 diameters (from Ø52 mm to Ø550 mm), Renishaw's angle encoders have a low cross-section and a large internal diameter to position easily around large internal rotors, payloads or services.
The rings also feature a unique taper mount which corrects for eccentricity of the rotor/shaft and ensures excellent accuracy, offering easy and robust fine adjustment of the ring's form and all installation tolerances. In addition, the rings offer a very low moment of inertia ensuring that whatever the installation, the system can be positioned with minimal torque and maximum speed.
|
|
Precise speed regulation directly on the suppliers of conveyor belt
Compact unit for path measurement
Ensures continuous material flow
Gewährleistet kontinuierlichen Materialfluss
Differing surfaces provide adaptation to all common conveyor suppliers belt types
Highly wear-proof
Plug & play
|
|
| The Schaevitz® line of rotary position transducers offers high reliability for absolute rotary position measurements in a range of specialized applications. Standard features include a non-contacting design, 120 degree measuring range, 360 degree free rotation, virtually infinite rotational life, infinite resolution, a wide operating temperature range and a fully signal-conditioned output. Applications include industrial controls, cock position, robotics and throttle controls. |
|
Measurement Specialties develops innovative custom packaged solutions for rotary sensing applications using magnetic sensing technology. An encoder is a sensing device that translates either linear or rotary motion into a predictable electrical output. Magnetic encoder technology has shown to be superior to existing optical encoder technology in areas of temperature range, contamination resistance, operational life, shock and vibration, critical assembly operations and in many cases, cost. Two main encoder applications are panels (for user inputs) and feedback (for OEM – PCB assemblies and packaged industrial encoders). Common uses include vending machines, equipment controls, flow meters and medical devices.
|
|
The Schaevitz® line of rotary position detectors offers high reliability for absolute rotary position measurements in a range of specialized applications. Standard features include a non-contacting design, 120 degree measuring range, 360 degree free rotation, virtually infinite rotational life, infinite resolution, a wide operating temperature range and a fully signal-conditioned output. Applications include industrial controls, cock position, robotics and throttle controls.
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as splicer, bending and/or punching, performed by industrial robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range. |
|
| ... products without technical information |
| |
| Our systems for gas permeability measurement for plastic and rubber samples have simplicity, excellent selectivity, high sensitivity and wide dynamic range. The measurable permeating components include water vapor, hydrogen-sulfide, methane, ethane, carbon-dioxide, BTEX (Benzene, Toluene, Ethyl Benzene and Xylene), ammonia etc. There are two basic forms of our systems; the first one, which is based on photoacoustic industrial gas detection, is optimal for measurements at normal pressure and temperatures up to 120 ° C. The second one, which is based on photothermal beam deflection method, can be used also at extreme pressures (up to 1000 bar) and also at high temperatures. An outstanding feature of our system is that due to the very high dynamic range of the measuring method, it is possible to fit numerically the early part of the permeation curve, which results in a considerable reduction of the measurement time |
|
The oxidation stability of biodiesel can easily be determined with the 873 Biodiesel Rancimat from Metrohm, a modern and reliable instrument with a 3 years’ warranty. In addition to reliable hardware and easy operation, it offers all the comfort to be expected from a PC-controlled instrument.
The method: oxidation stability according to EN 14112
The determination of the oxidation stability according to EN 14112 is an accelerated oxidation test. The sample is held in a sealed reaction tube at a constant temperature of 110 °C while a continuous flow of air is passed through the sample. The fatty acid methyl esters (FAME) in the sample are oxidized to peroxides as the primarily oxidation products. After some time, the fatty acids are completely decomposed into the secondary oxidation products. In addition to volatile organic compounds, these are low-molecular organic acids, mainly formic and acetic acids. An air flow transports them to a measuring vessel containing distilled water as the absorption solution. |
|
PetroOXY
Automatic Rapid-Oxidation-Stability Test of FAME
a new method to evaluat | | |
