|
|
Enraf introduced the automatic servo level gauging technology in the mid-fifties. Soon thereafter, we introduced the first automatic level gauge for bulk liquid storage tanks was be certified by leading Weights & Measures authorities.
The latest version is the unique Advanced Tank Gauge with only a few moving parts. The ATG and XTG series microprocessor-controlled servo gauges are compact and need only a 2" mounting flange.
The Enraf Servo gauge provides optimal measuring performance in any application, and can easily be integrated with existing SmartRadar, hydrostatic, or hybrid gauging installations.
Innovative ideas are geared towards user satisfaction. After more than 45 years, Enraf is still the driving force in tank gauging. |
|
| The Barksdale Tank Level Indicating Systems are sensors for remote indication level of liquid media. They operate according to the float principle with magnetic trans-mission (Permanent magnet, Reed switch and resistor chain). The liquid level is indicated on indicating instruments connected to the sensor. |
|
| WEKA tank level indicators are suitable not only for general liquid level measuring applications, but are also a cost-effective means of detecting interface levels between dissimilar liquids. These sensors are unaffected by temperature and pressure, and provide a stable and linear signal output, even with the existence of liquid agitation or the presence of a foam layer. Their ruggedness meets the requirements of the toughest operating conditions, including military applications. They are available in different configurations to so that an optimum solution can be offered for any level measuring range. With only one moving part, these sensors are simple, reliable, virtually maintenance-free, and easy to service, if such a need arises. WEKA has unique capabilities in precision fabrication of stainless steel and other specialized corrosion-resistant metals. This, together with our large selection of float designs, allows us to offer level measuring solutions precisely tailored to your needs. |
|
| Although the following packaged accelerometers are designed specifically for automobile safety testing, they may be used in a wide variety of other applications. Key features of these piezoresistive MEMS sensors include DC response, bridge output, wide measurement range, internal damping, and convenient user interface. All accelerometers come with integral cable assembly with or without custom connectors. Performance advantages of our piezoresistive MEMS sensors are wide bandwidth, high resolution, and good shock survivability. |
|
KONTINUIELICHE LEVEL MEASUREMENT
- capacitive level probes for liquids and bulks in
High-grade steel or plastic one, exit 4-20mA, for vertical installation, for
aggressive media, remarks with removable head and
exchangeable or shortenable probe staff
- Niveausonden with float principle, for liquids, exit 4-20mA
or resistance signal, Kundensprezifi remarks, in high-grade steel
or plastic ones
Level border conditions: Capacitive contactors,
optical contactors,
Float switch |
|
| ... products without technical information |
| |
| SafeCrest ESF is designed for use in rigid and flexible (bladder type) fuel tanks and fuel cells in virtually any vehicle, vessel, or aircraft. Because of its unique characteristics, special advantages, and cost-effectiveness, industry, government agencies, and organizations around the world are incorporating SafeCrest in special use vehicles of all kinds-aircraft and land vehicles, VIP vehicles, competition cars and boats, recreational watercraft, consumer vehicles-for added safety and/or fuel surge control and noise mitigation. |
|
| Explosion Suppressant Foam (ESF) has been used successfully in thousands of installations for over three decades. Proprietary manufacturing processes and special thermal reticulation techniques permit production of flexible skeletal foam structures with precisely controlled pore sizes and without cell membranes. The resultant "open pore" foam exhibits many unique characteristics and offers special advantages in fuel tanks for explosion suppression, fuel surge control, and noise mitigation applications of all kinds. |
|
Tank Cleaning can be defined as manual or automated. Cleaning can be a simple rinse with water, or cleaning with detergents and chemicals. Or cleaning can refer to sanitizing with cleaning agents that reduce microbial contaminants. No matter what, the end result of effective tank cleaning is the application of appropriate and consistent levels of rinsing, cleaning, or sanitizing at specified intervals. The goal is ultimately to prevent contamination that would alter the safety, identity, strength, quality, or purity of the final product. Spraying Systems Co. manufactures more than 80,000 different spray nozzles and accessories. Included in our line is a large selection of tank washers and tank washing nozzles. As a result, we're more likely to have available a nozzle to suit the needs of your tank washing application. And you can also be assured that the nozzle you select will be the most cost-efficient design possible. Visit our Web site @ www.spray.com for all your tank washing needs.
|
|
| The rotating heads are constructed in stainless steel 316, and are mounted on two bearings. All internal and external surfaces are worked with tools machines to high precision guaranteeing a smooth finish. The rotating heads are available with different thread: female BSP (GAS) or clip with quick coupling. |
|
A range supplements fixed or rotary heads of washing, high or low pressure, designed to be used in various applications and on many installations. To screw or clipser. Angles of Pulverization: 180° - 360°
Examples of Application:
Washing of Barrels
Washing of Engine
Rinsing of Barrel
Cleaning in Place
Washing of Containers
|
|
Lechler tank cleaning nozzles work without expensive and defectprone remote drive systems. They are self-rotating and driven by the cleaning fluid. Most types are available in stainless steel as well as in numerous other materials, e.g. PVDF.
The ingenious design of the orifices insures a powerful cleaning and low water consumption at the same time. |
|
| Our product range comprises a wide selection of rotating tank cleaning nozzles. The nozzles are driven by the cleaning fluid. Lechler tank cleaning nozzles operate at low pressures between 1 and 10 bar. The main cleaning effect is achieved by the special spray pattern and spray guidance. This saves energy, cleaning fluid and of course expensive cleaning time. Lechler tank cleaning nozzles are used for small tanks with a diameter of 1 m through to large tanks with diameters up to 16 m. You can choose between fixed installations in CIP plants or applications mounted on mobile appliances. |
|
This comprehensive range of tank washing devices have been developed for a number reasons. Primarily this is due to the quest for greater efficiency in all kinds of industrial procedures, but it is also the continuous requirement to assure a constant and higher quality level of product. Environmental considerations are also influential; the need to reduce energy use and the increasing costs involved in the disposal of effluents are also factors. Thus resulting in the need for a cleaning process that produces a totally satisfactory result and is completed using the lowest possible volume of cleaning solution; the right tank washing head can also be energy efficient.
Our range from the classic fixed head to the more sophisticated models has been developed to cope with the most demanding applications. The following basic concepts should be given proper consideration in order to determine the correct washing cycle for each single application, and consequently the most suitable type of tank cleaning device. |
|
| ... products without technical information |
| |
TRAY FOR SKIP WASHING PLATFORM
In order to respect the environment, SECATOL present a special tray for the skip washing platform to hold back the waste waters.
The tray is placed under the front part of the platform and when lifting this front part, the tray can be removed.
The tray has the following equipments:
- 4 lifting eyes to facilitate the prehension.
- An overflow outlet to evacuate the clear waters after the settling and decanting of the waste waters |
|
|
|
see the results for the following category
