|
|
Level sensors are used to detect the level of liquids. In contrast to mechanical limit switches the switch points can be freely selected within the measuring range. One level sensor can replace up to four binary switches. Another advantage is direct level indication on the display. Adjustment to the medium is done automatically. The sensor is suitable for many liquid media.
> Reliable function even in coolant applications
> No time-intensive cleaning of mechanical components
> One sensor for all media – no adjustment necessary
> Selectable switch points for applications as required
> Direct level indication by LED display
> Modular concept saves time and money
|
|
Products Level Measurement - Capacitive level sensors
All of the capacitive level sensors are now available with automatic calibration should the overall length need to be changed.
The required length can be easily adjusted by the user. Once the length has been shortened the unit will require to be re-calibrated. This is now very simple, just requiring the "Zero Adjustment" button to be pressed with the tank empty and the "Maximum Value Adjustment" button to be pressed with the tank full. The calibration is then done automatically by the integrated micro controller.
The advantages of these level sensors includes the ease of adjustment, voltage or current outputs, extremly robust by virtue of the coaxial measuring principle and a 2" BSP head. Additional switching points are available optional.
|
|
|
The capcitive filling level systems operate according to the three-electrode principle. With this principle the container or an additional electrode serve as a counter-electrode to the probe electrodes. For this reason it is necessary with this system that the container is of a conductive material or a "substitute electrode" is fixed to the container wall, e.g. copper foil. These systems are available with probes for analogue filling level measurement of for detection of 1, 2 or 3 measuring points. The position of the switching points and the analogue measuring area is user-definable within the possible effective range and therefore it can be determined for optimal matching of each application. Level measurements of bulk material, liquids or pastes are possible with a dielectric constant as of εr 1,1.
|
|
The vessel, capacitance electrode and medium to be measured form together an electrical capacitor. The level change is monitored as a direct result of the variation in capacitance value around the probe, dependent upon the degree of immersion.
Advantages
- Rugged sensors suitable for universal applications
- High chemical resistance
Applications
- Level measurement and level detection of liquids and solids
|
|
|
Resistive sensors emit a virtually linear and continuous signal which, controlled by a suitable instrument, indicates the level of fluid in a tank
|
|
Fuel level sensor DUT-E is designed for precision fuel level measurement in tanks of vehicles, tractors, fixed installations. Fuel sensor DUT-E is mounted in the standard hole of fuel level sensor or in the special hole in vehicle fuel tank.
Fuel level sensor DUT-E is to be used together with Fuel Monitoring Systems, Fleet Management Systems, GPS tracking systems, AVL Systems.
Advantages:
- Allows cutting “at place” up to 30% of initial length without recalibration
- Hermetic case made from cast duralumin
- Protection of sensor output from short circuit
- Protection from voltage overload (up to 50 V)
- Electrical noninteraction with tank body
- Possibility of sealing
|
|
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged transmitters, submersible level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid level sensors and switches, flow, oxygen and force sensors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring detectors. Fluid control devices include miniature solenoid valves, diaphragm pumps and electronic pressure controllers.
Sensortechnics has more than 25 years of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide.
|
|
CONTINUOUS LEVEL MEASUREMENT
capacitive level probes for liquids and bulk materials in high-grade steel or plastic
Exit 4-20mA,
for vertical installation,
for aggressive media,
Remarks with removable head and exchangeable or shortenable probe staffs
|
|
LLS 20160 DIGITAL fuel level sensor for vehicle tracking and telematics
Fuel level sensor LLS 20160 is intended for determining the level of light oils and other liquids in metal and non-metal vessels. Fuel level information is transmitted to on-board equipment of monitoring systems periodically or upon request.
The main features of the fuel level sensor LLS 20160:
- probe length from 100mm to 3000mm
- adjustable length in field conditions
- long-term stability of measurements
- built-in galvanic decoupler
- interfaces RS-232 and RS-485
- resolution 1023-4095 points (adjustable)
- data transmission rates from 1200 to 115200 bps
- powered from on-board power system, power supply 7-50 VDC
|
|
Gill Fuel Level Sensors use capacitive technology to accurately sense the level of fuel. The sensors have no moving parts and are ideal for use in extreme environments. All sensors feature fully integrated on-board electronics so there is no need for additional bulky electronic modules. The sensors are factory calibrated in the applicable fuel and are provided with our free ProbeMON calibration software to allow you to re-calibrate the sensors to your requirements.
Our fuel level sensors will operate to temperatures of 125°C and are compatible with all grades of:
- Petroleum
- Gasoline
- JetA
|
|
These are used where it is necessary to control with a high degree
of security the level of non conductive substances both liquid
and solid.
They are particularly used for controlling the level in silos for
cereals and foodstuffs, in feed plants, foundries and cement
works.
They function in the vicinity of the material to be controlled.
-Supply voltage 24 Vac or 110/220 Vac
-Relay output with 1 pole changeover from 5A to 220 Vac.
-Led incorporated
-Sensitivity adjustment
-Selector of min/max level
-SC series with power supply-amplifier incorporated within probe
-SCD series with power supply-amplifier separated from probe
-SX2 type with power supply-amplifier in plastic body
-Bar electrodes of teflon in standard lengths of 300/500/800 mm
-Plastified cable electrodes in standard lengths of 1/2/3/4
metres
-Housing in aluminium alloy with threaded fitting 1.1/2 inch GAS
|
|
The capacitive working LevelCheck 350C builds up a high-frequency, electrical field over the sensor surface.
If materials touches or is close to this field, the electrical field changes and the electrical signal changes within the sensor.
This is converted into a switching process. The sensitiveness of the sensor can be adjusted continuously to the adaptation
to different products.
|
|
OptiLevel is the leading edge system for liquid level measurement in smaller storage tanks. The OptiLevel tank gauging system is the best choice for your above and underground storage facilities.
The OptiLevel tank gauging system can be used for all applications in petroleum and petrochemical installations.
The state of the art HLS 3010HF level sensor and designed system architecture enable open interfacing to the Entis Inventory systems and other protocols.
|
|
Fully insulated, capacitive rod electrode for level measurement
For use in conductive liquids
All advantages in an overview:
- robust and maintenance-free
- easy installation and mounting
- measurement along the complete probe length
- insulation thickness 2 mm
- instrument from the plics® family
Version rod: - fully insulated
Insulation: PE, PTFE
Length: 0.1 ... 6 m
Process fitting: thread from G¾A
Process temperature: -50 ... +200 °C
Process pressure: -1 ... +64 bar (-100 ... +6400 kPa)
|
|
|
|
|
|
Ink Level Sensor, Adblue Level Sensor, LAB Level Sensor, Paint Sensor
The 'other' level sensors categorises liquids not covered by our 'fuel', 'oil', 'bio-fuel' or 'water' level sensors categories. Our level sensors will work with most fluids, using capacitive technology to accurately sense the level of the liquid. The sensors have no moving parts and are ideal for use in extreme environments. All sensors feature fully integrated on-board electronics so there is no need for additional bulky electronic modules. The sensors are factory calibrated in the liquid type and are provided with our free ProbeMON calibration software to allow you to re-calibrate the sensors to your requirements. We can produce sensors using alternative materials if the standard Aluminium, Stainless Steel and Titanium options are not compatible with your liquid.
Our level sensors will operate to temperatures of 125°C and are compatible with most fluids:
- Ink
- Adblue
- LAB
- Paint
We offer two ranges of level sensors, 'M-Series and 'R-Series'. An M-Series sensor is fully custom designed to your requirements, an R-Series sensor is our standard design, available at any custom length.
|
|
Limit switch made of plastic for liquids and bulk goods
CPS 01
Features:
Quick and easy setting via programming by keystroke
Electrical connection: Cable or plug M8
PNP transistor output Housing made of PP or PVDF
Make contact or break contact
Outstanding price-performance ratio
Functional LED display Small and compact
Thread BSP G½"
Description:
Immersing the CPS 01 into the medium will cause a change in capacitance in the electrical capacitor. The change in capacitance is detected by the electronics and the switching operation is initiated.
Adjustment to the corresponding medium is carried out with the help of a programming key (programming via keystroke).
Application:
Designed for level limit detection of liquids and powdery or fine-grained bulk goods.
|
|
| ... products without technical information |
| |
Non-contact capacitive displacement sensors of the capaNCDT series measure distances, lengths, dimensions, or positions of any electrically-conducting targets (e.g. metals). A linearisation function is integrated for measurement against insulator materials.
A wide range of sensor and electronic unit options allows optimum solutions even for the most demanding measurement tasks. The product range includes custom design versions for specific customer requests as well as low-cost versions for OEM applications.
|
|
High resolution, noncontact, capacitive sensors.
Available in compact, embedded systems or modular cabinets.
Ranges: 10µm to 10mm
Resolution: as low as 0.4nm
|
|
|
The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications.
|
|
|
Significant scientific and engineering enhancements in advanced materials, Pre-Process and In-Process production methods and in-site testing methods are driving the demand for displacement sensors that can handle extremely high temperatures up to 1832°F (1000°C). Contemporary producers of aircraft engine rotational alignment, plate glass, materials testing extensometry, continuous flow steel, now use standardized high temperature Capacitec sensor solutions for in-process applications to control the quality of their production on a real time basis. Qualification testing of disc brakes, jet engine dynamics and high speed shaft rotations also rely on Capacitec sensors. Advanced materials for automobiles, structural components, and aircraft are also tested for strength and durability with the use of Capacitec's line of extensometers and clip gauges.
|
|
|
Microprocessor chips have found their way into a surprisingly high number of products that are around us every day in our home, car and office. This explosion in worldwide demand has forced semiconductor manufacturers to enhance quality and throughput in ways never before imagined. Capacitec's microinch level positioning sensing systems assist chip processing and handling equipment manufacturers to sense silicon wafers for exact positioning prior to deposition, etching and other processing where generating unwanted particles is preferred. This is accomplished without coming into contact or damaging their highly sensitive surfaces. Other industries where sensitive surfaces must be measured damage free are printing presses, photocopier rollers, computer hard disc drives and molten materials.
|
|
Laser Hologage LGH (resolution 0.01 um):
- High-accuracy type with high displacement accuracy (0.1 um), high repeatability (0.02 um), and a length measuring range of 10 mm
- Optimal as a master gage of measuring instruments.
- For detailed information, leaflet is available on request.
Linear Gage LGB2 (slim type, resolution 0.1 um):
- Optimal for incorporation in equipment owing to a slim head type.
- Resolution: 0.1 um, accuracy: 0.8 um, measuring range: 5 mm
- For detailed information, leaflet is available on request.
Linear Gage LGF (resolution 0.1 um):
- A new model with a resolution of 0.1 um added to the lineup in the LGF series.
- A drastic cost reduction has achieved compared with the conventional type. Measuring range: 10 mm, 25 mm depending on the type
- For detailed information, leaflet is available on request.
|
|
| ... products without technical information |
| |
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged transmitters, submersible level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid level sensors and switches, flow, oxygen and force sensors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring detectors. Fluid control devices include miniature solenoid valves, diaphragm pumps and electronic pressure controllers.
Sensortechnics has more than 25 years of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide.
|
|
|
|
|
|
|
The Series 4000 Capacitec® amplifiers and racks were designed to offer the best signal to noise ratio and wide band width response options in a simple modular package. The 4000 Series was built upon our 20 year proven foundation of 3000 Series amplifiers (3101-SP, 3200, 3201-SP) still in operation. Utilization of individual pins in a 32 pin DIN connector increases reliability for more industrial applications where vibrations are present. The small Euro-style 2U size boards have appeal for small portable packaging as well as high (but lightweight) density applications. When coupled with Capacitec® non-contact displacement probes, they produce a linear output voltage proportional to the gap spacing between the probe and a ground plane. The systems are designed to produce stable and reliable operation with excellent gain and zero shift stability with respect to changes in ambient temperature. Stability is achieved with a digitally derived sine-wave oscillator, having a crystal clock as the frequency reference.
|
|
| ... products without technical information |
| |
|
|
