|
|
The Z32Embedded DOS is the base components for realizing a Z32 CNC system. It is installed in the electrical cabinet, and it come sin two versions:
- Embedded DOS.
DOS Operative syetem.
Simply connecting a standard qwerty keyboard and a SVGA monitor to Z32 Embedded it is possibile to use the simple, but complete, DOS interfaces.
If it is connected (through Ethernet cable) with an external console PC, the strongest point of the Z32Embedded DOS is the complete and definitive separation between the real time controller (axes and PLC) and the supervisor connected with an Ethernet cable.
- Embedded WRT
Windows Real Time Operative System
The Embedded WRT has the same features of the Embedded DOS, but the Windows operative system permits to use evolute human-machine-interfaces without needing an extern console PC.
(HMI) -- Human-Machine-Interface:
D.Electron has developed a full software suite ("Z32 for Windows") for installing, servicing and using the Z32 CNC's.
It is however possibile for the machine manufacturer to develop its own interface. |
|
Concentration, Water Content and Dry Substance measured by microwaves
Your Advantages:
High selective sensitivity to water
High accuracy and long-term stability
even for difficult products
Simple installation, insertion directly
on the existing pipelines, vessels, chutes etc.
Simple start-up, system supported sample taking,
automatic calibration and graphic display
Accurate and reliable measurement
due to two highly stable PLL-synthesizers
and multi-frequency technology
Durable sensor measuring cells with wear resistant
smooth walled PTFE lining
Contactless measuring cell without installed
measuring antenna
High operational safety and standards of quality |
|
Features and applications
Gravity position indicators are suitable with handwheels or knobs on spindles with horizontal or max 60° inclined axis
|
|
| ... products without technical information |
| |
The SEAL-PLUSTM
restraining end features...
- A proven wedge-shaped gasket... a
Dresser benchmark for over 100 years
- Common end assures uniform installation procedure for the entire product line...no need for additional training
- Mechanically loaded gasket pressure for a positive seal
- Volume compensating spring washer adjusts and maintains gasket pressure
- External grip on plastic...meets all D.O.T. code requirements
- Bottom-out tightening provides a visual verification of proper installation
- Simple, quick installation...easy stabbing at low temperatures
- Pressure and temperature ratings equal to the P.E. pipe
The design of the SEAL-PLUSTM Restraining End delivers many proven features which contribute to both ease of installation and permanent, leak-free service. There's a proven wedge-shaped gasket, a Dresser benchmark for over 100 years. And a volume compensating spring washer that adjusts and maintains the gasket pressure, even at extremely low temperatures.
Visual verification of proper installation is attained through ottom-out tightening of the nut against the body. A color code on he insert verifies that it is properly sized for the wall thickness of he tubing on which it is being installed. |
|
Honeywell electromechanical shifters are designed for off-highway applications requiring direction and speed control. They are completely sealed and are built to withstand the harsh environments of the off-highway industry. Mounting clamps for shifters and turn signals are available to order separately, with or without locating pin, for column sizes shows in order guides.
|
|
| The Jetline CMC 1000 uses an industrial computer work station hardened for GTAW environment. The operator is supplied with a keyboard and mouse, plus a rugged hand pendant coupled to a 15" LCD touch screen running the 2 GHz Intel P4 Processor. |
|
| ... products without technical information |
| |
The Concorde is a computer controlled compact, self-contained CO2 system. This lightweight system, with its 360o rotating head, makes it easily integrated into a CDRH compliant enclosure.
Available in 10, 25, and 50 watt power
Long life CO2 tubes- 20,000 hours before recharging
Easy to use marking software included
High speed marking head with built-in error correction
Mark either stationary or optional "on the fly" |
|
ProWriterTM F20
Blazing Fast Marking Times
High Repetition Rates Providing High Production Throughput
Exceptionally Clean Marks with little Heat Affected Zone
Means no detrimental effect on sensitive applications
High Contrast Marking Ratios
Important for Character & Logo, Visibility, Barcode & 2D Matrix Code Readability
Excellent for Marking : Metals, Plastics, Ceramics, Composites & More!
Annealing - Black surface marks on metals created by bringing carbon to the surface
Surface Etching - Creating high contrast surface marks by changing the material characteristics without material removal
Ablation - Shallow, permanent marks with some material removal
Engraving - Deep marks in all materials for performance or 2D, 2½ D and 3D effects
Ultra Compact Marking Head Design for Easy Integration into any Automation System
Integrated Fiber Laser Marking Systems for all Industries - Automotive, Aerospace, Commercial, Electronic, Medical, Tools & Tooling, Packaging, and Trophies & Awards
Automatic, Semi-Automatic, and Manual Parts Handling Systems
Most Powerful CAD/Graphics Based Software in the Laser Marking Industry - Laser Marking Studio
Total Software Control of all Marking & Engraving Processes with our Graphical Point & Click Interface
Advanced Interface for Seamless Coupling of Automation and Marking Parameters
3D Layering of CAD & Graphics Files
Most Comprehensive list of Barcodes & 2D Matrix Codes - includes free updates for two years |
|
IC Tray Marking Systems are designed for marking parts transported in JEDEC trays. The flexible, graphical operator interface provides the easiest setup for IC and JEDEC tray configurations. Our systems allow the users to serialize and mark parts including those in tray configurations with missing or an odd numbers of parts.
BCL's systems verify part position in the tray, pin location for orientation of the part, and the part type to ensure the correct part is loaded into the tray. Our systems are fully automated and provide real time power measurement to ensure marking parameters are within tolerances before marking begins. |
|
The ProWriterTM D25T is a 25 watt diode-pumped laser marker featuring a TEMoo beam profile. This compact laser system is ideal for specialized applications requiring a tightly focused beam with high energy density. The D25T marks a wide variety of marks on: metals, ceramics, composites, plastics, painted/anodized metals, and many others.
Features
Two Year Life Warranty (10,000 Hour Diode Pack)
Reduced Maintenance
Internal Stainless Steel Chiller
Lower Operating Costs
Improved Beam Density For Better Marking
Available in 4", 6" and 12" Marking Field |
|
| Diode-pumped lasers have gained popularity with today's manufacturers and are an attractive alternative to lamp-pumped laser markers. While similar in construction to a lamp-pumped system, the diode laser uses a diode pack to "pump" or energize the crystal. Unlike the "white" light produced by the Krypton lamp, the diodes produce a wavelength optimal to the YAG crystal. Thus, the diodes use less energy to generate the same relative power output. Because of the increased efficiency, less heat is generated so an external chiller is not required. |
|
| ... products without technical information |
| |
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss |
|
Workstation
Clean Room compliant Class i enclosure
Pressure sensitive joystick for mask navigation
Ultra fine thumbwheel focus override
Available mask Auto Loader and Mini-Environment
Advantages
Unique Ultrafast Femtosecond Laser
Image Processing Sub-micron Repairs and Other Machining Applications
Laser Ablation and CVD
Repairs without Subtrate Damage, loss of DUV Transmission, Splatter or Edge Roll-up
Advanced Platform and Motion System provides vibration isolation |
|
CUTMASTER
Micrometer adjustable or programmable focus
Completely sealed to eliminate contamination
Quick change focusing lenses to accommodate multiple processing
Gas assist
Economical
Capable of cutting, trimming, welding, scribing, slotting, drilling, & marking
No tool wear or breakage
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss |
|
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss |
|
Advantages
Deep penetration without sacrificing the need for a narrow weld bead
Faster weld times
Miminal heat with no part distortion and no secondary processing
Seam tracking through vision systems
Superior accurate positioning tables for gauranteed repeatability
Laser Processing Parameters
Beam On/Off
Gas On/Off
Processing Delays
Shapes - Lines, Arcs, Circles, Rectangles
DXF conversions from CADD Drawings
Preview Screen
Real Time Table Path Plotting
Real Time Table Positions
Real Time Laser Parameters
Line by Line Program Flow
Loops (for step and repeat)
Subroutines
Digital Inputs and Outputs |
|
Application Materials
Steel Aluminum Diamond Ceramics Copper PCB Laminates Plastics Many others
Advantages
Excellent Process Control
No Tool Wear
Increased Throughput
Sub-micron Drilling
Fast and Repeatable Production |
|
The RETINAMATIC 2000 equipments are in use for the detection in real time of foreign contaminants as stones, metals, glasses, plastic, etc. In already stiff products or bulk productions with judging sensibilities that can come to 0.5mm (diameter of sphere) depending on the characteristics of the product (density of the same one).
The area of industrial application is indicated for the sectors of food: conserve, pre-coocking, frozen, 4th range, etc.), pharmaceutical, cosmetic, detergents, aerosols, etc...
This equipments allow to inspect different formats of products presentations: groups inside box, bags and metallized trays, carton, tin, etc., covering a great variety of widths and heights of product configurables. |
|
|
