|
|
Widely used for warehouse and factory operations
- Especially designed for palletized loads transported by manual pallet trucks or powered pallet trucks
- Moving heavy equipment either onto or off a vehicle in a level mode
|
|
LoProfile™ lift tables provide lifting
power from a very low elevation. This low collapsed height provides easy access for pallet jacks, 4 - wheeled carts and other devices requiring low profile. The LoProfile™ is also an excellent choice for conveyor transfer.
|
|
For lifting and positioning of lighter loads, Presto Light-Duty scissor lifts are the answer. They come in a variety of configurations to suit just about any need.
Features:
- Foot operated hydraulic pump provides lift
- Hand controlled release for lowering
- 1/2" steel plate scissor legs
- Lifetime lubricated bearings
- Wide base models
- Oversized & custom platforms available
- Hinged platform allows easy access to cylinders
- Chrome plated ram cylinders
- Custom designs available
|
|
MODELS ELT150 / ELT300 / ELT350 / ELT500
ELT800
Capacity Kg 150 / 300 / 350 / 500 / 800
Raised height mm 740 / 900 / 1300 / 900 / 1000
Lowered height mm 225 / 340 / 348 / 340 / 420
Overall size (W x L) mm 450 x 780 / 500 x 925
500 x 980 / 500 x 925
515 x 1150
Handle height mm 825 / 925 / 980 / 970 / 996
Table size (W x L) mm 450 x 700 / 500 x 855
500 x 910 / 500 x 855
515 x 1000
Wheel mm Ø100 / Ø127/ Ø127 / Ø127
Ø150
Foot pump to max. height mm 25 / 32 / 55 / 45
55
Weight Kg 46 / 82 / 120 / 87 / 115
|
|
SHT 100: The mobile, ergonomic high-speed lift table
- with a flexible goal height for production and logistics
With our mobile high-speed lift table goods are brought again and again very quickly, securely and comfortably on a selectable goal height. The goods can be then infered from all sides.
vertical lift: selectable from 700mm up to 1400mm
speed: 1400mm in 6 seconds
goal height: 800 up to 1400mm
load width: 800 up to 1400mm
load length: 800 up to 1600mm
additional load according to agreement
You adjust the goal height of the table at the place of work and lower the plate to the ground. You push the goods on the plates and bring them on goal level in only 6 seconds. Now you can push the goods on a bordering table.
Discover the various application types!
|
|
Backsaver Lite Lifts
These industrial grade lift tables are specifically designed for those applications involving lighter loads of up to 1,500 lbs.
They are available in four standard configurations:
Stationary, Compact with high lift and small footprint, Portable with easy rolling casters, and Powered Portable with battery powered drive.
|
|
HYDRAULIC LIFTING TABLES
150 kg, 250 kg, 300 kg, 550 kg, 800 kg
Données Techniques fondamentales
Scissor tables in accordance with NEN EN 1570
standard and CE mark requirements. Hydraulic
speed control valve, castors with foot protection.
The LT-WH300-15 has a double scissor mechanism.
• Speed centre.
• Anti-overload safety.
• Double brake.
• Foot protection
|
|
Bishamon ESX Series MobiLeveler® work positioners are fully adjustable, weight sensitive, self-leveling scissor tables with push-bars and casters. ESX Series work positioners provide improved ergonomics, productivity and efficiency by automatically raising and lowering during loading and unloading so the worker does not have to stoop, bend or strain.
Standard Features
- Load weight compensating
- Easily accessible gauged weightselector knob
- Single and dual spring models
- Heavy-duty maintenance, scissor locking pin
- High quality casters with brake
- Steel work platforms
- Rugged construction, with heavy-gauge steel and sturdy welds throughout
- Clean design with minimum of maintenance requirement
- Durable powder coated finish
|
|
Ideal for transporting loads to and from work cells, where they can be used as work platforms or raised and lowered to facilitate load transfer to tables or benches. Choose from Manual (foot pump) or Electric (pushbutton) configurations.
Features:
- Capacities from 300 - 1,500 lbs.
- Lifting heights up to 45 1/2"
- Convenient foot pump for easy lifting
- Adjustable speed lowering via hand release
- 1/2" steel plate scissor legs
- Lifetime lubricated bearings
- 2 fixed and 2 swivel casters for manueverability
- Oversized/custom platforms available
- Hinged platform for convenient cylinder access
- Foot operated floor lock
|
|
Bishamon EZU Series Pneumatic Lift Tables are the convenient way to use air to raise, lower, and position a load. Pneumatic lifts contain no electrical or hydraulic components. They require little maintenance and provide the ideal tool where cleanliness is a must and where sparks can be hazardous.
Standard Features
- Firestone Airstroke Actuator raises and lowers the table platform to vertically position the load to the desired height
- Durable and attractive polyester powder coating adds life and superior corrosion resistance to the finish
- Heavy-duty structural steel construction with rugged base frame
- Entrapped rollers on base and platform for added stability
- Dual attached maintenance blocks
- High quality brass hand lever controls allows easy operation
- Clean design with minimum of maintenance needed
- Fork truck transportable without the need for additional options
|
|
Southworth's conventional Manual Turntables are available in a full range of capacities up to 6,000 lbs and sizes from 24"x24" to as large as 60"x60".
Features include:
- Baseplate sized to the platform.
- Low 2 3/4" silhouette to maximize useable working height for increased unit -- load capacity. 1/2" thick, solid steel platform.
- Oversized 1 3/8" center pin.
- Lubricated-for-life center pin bushing.
- Load rollers are sealed bearings.
- Maximum platform support.
- Two years parts and labor warranty.
|
|
When our standard products can not meet your requirements, our team specialised in mechanical construction, the technicians of the R&D Department, (equipped with 2D and 3D CAD systems) work with you to design tailor-made products.
The means at their disposal and their combined experience in the field enable us to find the solutions to the constraints of your projects.
The ACI elevation R&D Department, composed of creative and experienced men, will draw 3D drawings taking into account your environment, your specifications and other technical constraints...
|
|
Vision™ Series
Designed from the ground up, Vision lifts incorporate design features
that provide unequaled quality, performance and safety. Vision lifts
increase productivity and reduce worker strain in today’s harsh industrial environments. By lifting and accurately positioning the load, Vision lifts eliminate unproductive lifting and stretching that ultimately leads to worker fatigue and injuries.
|
|
With 2,000, 4,000 and 6,000 lbs. capacities and a variety of platform sizes, these rugged, dependable scissor lifts are perfect for just about any work positioning or assembly application.
Features:
- Choose 24", 36", or 48" vertical travel
- Hand control pendant (foot control option available)
- Heavy-duty hydraulic cylinders with chrome plated rams
- Polyurethane seals on cylinders
- Rugged 3/4" steel plate scissor legs
- Lifetime lubricated bearing on all rollers and pivot points
- Hinged platform for convenient cylinder access
- Supersized 48" x 96" platforms available on standard lifts
|
|
Tilt-A-Lift® Forklift Service and Maintenance Lift
Fast, Safe and Easy Maintenance for Forklift Trucks
The Tilt-A-Lift® service lift simplifies maintenance and repair of forklifts and other short-wheel based industrial vehicles. Just set the width of the portable unit to the required distance and drive the vehicle onto the loading ramp and into position. The Tilt-A-Lift® tilts the vehicle as much as 60° from horizontal using no cables, chains, or worm screws and allows easy access to underside parts for lubrication, repair or part replacement.
Two standard service lift models are available:
The S-15-A has a 15,000# G.V.W. capacity and the C-25-A can handle vehicles up to 25,000# G.V.W.
|
|
For the ultimate in precise positioning, nothing is better than a lift and tilt table. Operators control the height of the load as well as the angle of access. Thes units are ideal for handling parts in shallow containers, totes or gaylords. They are available in Hydraulic, Pneumatic, and Floor Level styles.
Features:
- 2000 - 4000 lb capacity
- 33" vertical travel
- 30 degree tilt
- Pedestal mounted control available
- Optional foot control available
- External 1 HP 115/1/60 power unit
- Optional power units available
- Floor level lowered height
- No ramps or pit required
- Custom designs available
|
|
- Standard Lift tables and to measure
- Other products
Tables TEUP, tables of quay,
tilting lift tables,
tables for installation
of workstation,
palletization/depalettisation
- Examples of uses
Logistics/Storage
Bottling
Agribusiness industry
Industry
Pharmacy
Metallurgy
Car
Aeronautics
Glass, wood...
|
|
Lifting type NIVO PIK ref. YOU
Apparatus allowing the loading of a pallet the level of the ground per pallet truck or forklift truck and to have a movement of rise to keep an ergonomic position lasting the loading or unloading of the pallet
Charge with 250 to 2000 kg
Assembled control/descent by knob with maintained contact
Electrohydraulic rise
Électropiloté valve fixed on the cylinder
EC normalizes
Option:
dimensions of the plate or the forks
Revolving plate
Roller conveyer free or motorized
Tilting plate 30°
|
|
- Air cushion transporters of all sizes, up to a load of 1000 tons, with friction wheel drive and automatic , proportional air volume regulation of the air cushions and with the following options:
+ direct or remote controlled
+ wireless with infrared - or radio control unit
+ full automatic with induction loop or passive guiding tape
- Air cushion special equipment and devices (also for explosion-protected areas)
Here are some examples of our products based on air-cushion technology:
-Scissor lifts
|
|
LIFTING TABLE WITH BELLOW
Lifting table with manually swiveling plate and bellow the ease the handling of stacked items in one or two containers.
Main characteristics of the platform with bellow shown on the photo :
Lifting capacity : 2000 daN
Platform dimensions : 2,400 m x 1,600 m
Collapsed height : 0,440 m
Vertical stroke : 0,160 m + 0,500 to ease the maintenance
Mechanical drifting of the swiveling plate every 180°C.
Basic frame with two fork pockets to allow the entire unit to be lifted and moved by fork truck.
Feeding : tri-phased
Main options : motorized swiveling plate, manual or powered mobility on ground or on rails, galvanization, radio-control.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking parts to fill in or to empty containers....
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double vertical lifting tables are used for heavy and very high lifts.
|
|
Standard and custom table solutions
up to 10 t load, up to 8 m lift
High positioning accuracy and repeatability over the entire lifting stroke
Extreme rigidity of the elevating platform, even where transverse loading occurs due to the design with 4 independent scissor arms and the provision of a scissor pivot bearing point at each corner of the upper frame.
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded structure
High service life, even under rough, continuous operation
Rapid interchange of all drive components
All bearings are lubricated for life
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
APPLICATIONS
Personnel work platforms
Freight lifts between floor levels.
Mezzanine lifts,
Automated palletising systems
Positioning test apparatus or tools.
These tables are available up to 4000kg capacity and 4000mm of lift. Contact Safetech for applications outside this range.
|
|
Up to 50 t load, up to 8 m lift
Short assembly and maintenance times
Durable welded construction
High service life, even for rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability.
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
umerous accessories and special designs round off the product range
|
|
GRUSE-Eurolift are modern CAD constructions using a building block system and meet the newest european regulations. They are particularly robust , precise and long lasting but never the less offer good value for money. New equipment packages make it easy to choose the right table for your particular application and save money.
Examples of the many employment possibilities of the GRUSE-Eurolift:
- underframe constructed of angle-profile
- plattform as integral part of overframe
- differential cylinder
- easily changeable roller-, pivot-, scissor and cyclinder pins
- foot contact board
- inspection support
|
|
PH Series Mobile Hydraulic Lift and Assembly Tables
The basic PH Series table can be configured with many special features and options to meet specific requirements including cleanroom and other electrostatic-free operation, or as part of lean manufacturing assembly systems. Stainless steel models are available for sanitary or corrosive environments such as food and beverage, pharmaceutical and chemical processing.
Custom configurations, utilizing other Unidex products such as manipulators, workstations, etc. can be designed to create flexible work cells and more productive production areas. The PHL Series incorporates the lift, transport, and assembly features of the PH Series mobile tables with the mobility and positioning function of our PE Series mobile electric workstations.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
|
|
LIFTING TABLE FOR WOOD INDUSTRY
Mobile lifting table on guiding rails for transversal travels. Equipped with a free rollers conveyor for the transfer of planks or furniture elements in wood industry.
Main characteristics of the lifting table for wood industry shown on the photo :
Lifting capacity : 1500 daN
Platform dimensions : 2,500 m x 0,900 m
Collapsed height : 0,250 m on rollers
Vertical stroke : 0,750 m
Rollers are blocked during the lifting of the load. Rollers are free again only when the table is in low position, down on its mechanical stops. Then horizontal transfer of loads to other stationary conveyors is possible.
Feeding : tri-phased
Main options : motorized rollers, powered travel on rails, galvanization, radio-controls...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Wood industry but also metal workshop and all kind of industries.
Stacking and un-stacking of planks, or others at a constant and ergonomic level for the operator.
|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and pneumatic components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al)
|
|
|
|
