|
|
Series HTT :
Tilt Table
Capacities: 1,000 to 6,000 lb.
Platform Sizes :24" x 36" to 72" x 72"
Tilt Angle : 45° |
|
Lift Products MAX-Tilt & MAX-LIFT & TILT tables are designed for those applications where tilting or lift and tilting the load provides for improved access to the product. Table available with 45, 60 or 90 degree tilt.
Both series are electric hydraulic with the 45 degree models powered up and gravity down while the 60 and 90 degree models are powered both up and down with double acting cylinders. With capacities of 2,000 - 6,000 lbs., the MAX-series table can handle most applications.
FEATURES:
* 3/4 or 1 1/2 hp motor. 115/230 volt single phases or 230/460 3 phase voltage. Motor is internally mounted on most models and externally mounted on table sizes with 24" wide base.
* Push button magnetic back control box standard with 6' cord
* 10' power cord standard
* Hydraulic gear pump with check valve, solenoid valve, filter and velocity fuse standard.
* Smooth steel deck with 4" high lip on hinge end.
* High quality chrome plated cylinder.
* Control box includes magnetic starter transformer, thermal overload and fuses
* Designed for surface mount or lift table mounting.
* Powered up on 45, 60 and 90 degree tilt. Gravity down on 45 degree and powered down on 60 and 90 degree tilt.
* Tilt limit switch
* Color yellow top with blue frame.
OPTIONS:
* Foot control switch.
* Tapered toe guards for pit mount.
* Lowering beeper.
* Remote power unit.
* Accordion bellows safety skirting.
* Special color.
* Adjustable tilt limit switch.
* Raised base. |
|
The parts to be oriented are delivered to you in: containers, cases, boxes, loose or in bags.
You need to tip the parts into orienting hoppers which will supply the vibratory bowl feeders. |
|
Extraflat tables for transpaletas, models in painted, galvanitzado or stainless.
Extraflat table with access to transpalet and reclining table.
Extraflat table with access to incline.
|
|
| Technical details series PL3 is realized in order to resolve the problems of balanced long cargo raising puts off center to you or furnish. Equipments of series: • Built-in or separated telephone exchange • Trap door of inspection on the pianale • Perimetrale chassis of emergency • Arms of emergency for the maintenance • Commandos to pulsantiera or pedal-key, present man • Feeding 400 V/50 Hz, Aux. 24 V.A.C. • Valve of block to the base of the oleodinamici cylinders • Rotary parts on self-lubricating bearings or ears-ring • Paint job standard: green - orange • Construction to norms CE, in compliance with EN 1570 Upon request the several requirements of the customer come realized particular applications second. Capacity (kg) Until 50.000 Length (milimeter) Until 16.000 |
|
| ... products without technical information |
| |
| These fixed height "tilt tops" can be mounted on legs, workbenches or directy on the floor. They are ideal for odd shaped or sized containers or odd loads. |
|
Plate 800x800 / 1000x1000
Capacity load 4000 Kg
Tilt 0 - 90°
CN tilting table for milling operations
- Tilting axis
- Cast iron structure
- Mechanical drive through worm screw
- Hydraulic clamping
- Hydrostatic support system |
|
The Key Advantages;
Application
For precise two axis or compound angle settings on precision machines for measuring or fine machining of precision components requiring platen sizes between 200mm and 1200mm diameter.
Construction
All principal castings are manufactured from high grade stabilised cast iron. The tilting movement is a motor powered system employing a ball screw and nut mechanism.
Bearing
Preloaded axial-radial roller bearings are incorporated on each axis, to provide high rigidity, sensitivity and fine positioning in both planes.
Clamping
Distortion-free clamping systems on both axes.
Measuring Systems
High precision Heidenhain angular encoders with DRO or NC systems.
Motors
Various motors available
Construction
All principal castings are manufactured from high grade stabilised cast iron. The tilting movement is a motor powered system employing a ball screw and nut mechanism.
|
|
Application
Additional rotary and tilting axis for your machine. High accuracy and loading capacities make these tables suitable for machining and metrology applications.
Bearing
All sizes are equipped with pre-loaded axial-radial roller bearings, with a high-loading capacity in both horizontal and vertical planes. This ensures sensitivity for the fine adjustment of the table platen.
Clamping
Distortion free passive clamping by preloaded spring elements with hydraulic release.
Measuring systems
Heidenhain ROD 250/700/800/905, RON or Rotary Inductosyn are typical.
Motors
DC and AC motors.
The modular construction provides the widest possible freedom for application variations. |
|
Peiseler two-axis table combinations are available as NC units with backlash adjustable split worm drive, direct drive, or indexing units positioning over Hirth gears. The trunnion axis (A-axis) turns (tilts) the table axis (C-axis). The high quality Meehanite-casting, distortion free axis clamping, manifolds with hardened steel shaft running in bronze bushings, as well as the appropriate selection from several types of high grade bearings, assures the highest possible precision. Diverse gear ratios or gear reducers allow for the optimal adaptation to any load condition. The use of very accurate measuring systems in combination with a high mechanical accuracy, results in only a few seconds of arc positioning deviation. The robust design enables simultaneous five axis machining even under heavy machining load. Special face plates, pallet-receivers, collets, and large through holes are available or can be designed to meet customer requirements.
Face plate diameters from 100 to 1,000 mm.
Adaptive to all drives.
Please request our comprehensive catalog.
|
|
| ... products without technical information |
| |
Open or sealed transfer of solids from drums to process equipment
Flexicon "open-chute" and "lift-and-seal" drum dumper models accommodate all popular drum sizes and are available in carbon steel with durable industrial finishes, or in stainless steel with material contact surfaces finished to industrial, food or pharmaceutical standards. All models can discharge directly into process equipment or into hoppers equipped with outlets for connection to Flexicon flexible screw or pneumatic conveyors, or to other process equipment.
|
|
| ... products without technical information |
| |
Skips and tipping containers from polyethylene (PE) or steel
Due to their low height, compact tipping skips are ideal for use as an auxiliary container to be attached to fork-lift trucks and machinery for example, for the disposal of waste and chippings.
A cable located at the driver’s seat activates the unlocking device and the container then tips forwards
automatically. Subsequently, by lowering the forks the tipping trough is brought back to its loading position. |
|
Self dicharging boat skip
The AUTOVID PB Boat Skip is designed for handling rubble, earth and other materials around a construction site. The skip is fitted with a hinged reinforced bale arm which offers three advantages over traditional circular tipping skips.
1. With the skip sitting on the ground the bale arm hinges to the rear and this, coupled with its low profile, enables easy loading.
2. When discharging, the vertical position of the skip along with its design ensures a quick and complete operation.
3. The skip can be used by the crane operator without the need for an assistant. The cycle of operation is very simple as the crane operator only has to lift and lower the crane hook. |
|
The BAB is the ideal piece of equipment on the building site, to be use with a forklift truck.
Especially suitable for moving, storing materials or rubbish, the BAB skip is shock-resistant.
By means of a lever operated system, and by unlocking the skip, the forklift truck operator controls the tipping movement of the skip from his driving position. The skip comes back automatically in locked position after discharging with the reverse lever operation. |
|
Car-tilting bucket of type "BBA"
For the collection of all your waste
Volume from 250 to 3000 liters
Resumption of the bucket on the 3 dimensioned by forklift truck or pallet truck
Control of opening by a lever has latch of safety
Interlocking of the bucket automatically by simple slope of the chechmate of the forklift truck backwards
Opitions:
Wheels, completion hot galvanization, marking, valve of draining, lid etc.... |
|
| ... products without technical information |
| |
O.ME.P.S. SRL knows what the customers expect from a tipping silo semi-trailers manufacturer: innovation, quality and economization. For that reason our engineers have designed a new chassis for the tipping silo semi-trailers, creating the new range of the CR Light Liner.
The choice of new aluminium extrusion sections allow to reduce the dead weight of the CR 59 silo semi-trailer, just 6.600 kg and to raise its payload: the chassis has been entirely bolted with special self-braking bolts, the oil tank has been put on the front side of the frame, so that the rear transom supporting the lending legs is lighter during the tipping step.
Moreover the safety for the vehicle stabilization has been improved thanks to the application of a double bolt die on the manual lending legs and a double locking valve on the hydraulic lending legs.
The main characteristics of such a light tipping liner is the lowest barycentre of the loaded semi-trailer and the particular care for the details. |
|
TIPPING LIFT TRAILERS
CASE EQUIPMENTS
> 1 Very thick stainless steel or painted steel monocoque case.
> 2 Right and left side with supports realised by pressing.
> 3 Panels in front and in the back also pressed.
> 4 Anti-swirl peripheral superior supports.
> 5 Stainless case strips or epoxy, welded on the case.
> 6 Headings consolidated by stainless or steel wire stretcher, welded on the case strips.
> 7 Anti-splashes cover flaps on both sides of the door.
> 8 Anti-deformation door supports.
CHASSIS EQUIPMENTS
> The structure of the chassis is done in sheet steel with a thickness of 8 mm.
> The chisels are done in rectangular profile steel.
> The cradles and the supports of jacks are also very thick, in order to avoid any deformations.
> Adjustable arrow 2 positions.
> Screw crutch.
> Hydraulic dumping by hoses.
> Anti-scrap protection on jacks.
> Parking brake.
> Lighting in conformity with the law in vigour.
> Hydraulic braking on models BBE 60 and 60.
FOR OTHER OPTIONS AND DIFFERENT MODELS, PLEASE SEE THE DATA SHEET OR CONTACT THE COMMERCIAL DEPARTMENT... |
|
The tipping horizontal pressure tank O.ME.P.S. type CM 25 is manufactured of Peraluman 45 R light alloy to transport powdery foodstuff (flour) for a total capacity of 25 m3. It is tested at 2 bar pressure according to the standard PED 97/23/CE.
The vertical discharge system is equipped with:
n° 03 load manholes with 3 wing nuts’ closing;
atoxic and polyvalent unloading system;
n° 1 aluminium bottom for the product unloading, complete of butterfly valve, Ø 150 mm;
atoxic rubber pipeline;
accident protection (n° 1 anti-slip ladder, n° 1 gangway with a pneumatic safety handrail) according to the standard C.M. 294/93;
n° 2 unloading hoses, Ø 100 mm, 6 m long, complete of their hosetubes;
tank chassis in S 355 JR steel, equipped with n° 2 saddles for the tank support;
hydraulic system compound of tipping cylinder, valves group for the control, hydraulic circuit with pipeline and connectors, hydraulic oil tank, rear stabilizing legs, kit hydraulic pump
Tank painting: unique tint O.ME.P.S. WHITE (different colour/logo application on demand)
Structure guarantee: 24 months.
The tank is homologated in accordance with the standard PED 97/23/CE
* Supply and assembly of N° 1 GHH - RAND COMPRESSORS TYPE CG 80, PTO not included (supply by your side). |
|
|
|
