|
|
industrial application - lift applications :
This scisors lift platform is a Standard automotive lift table for automotive industry
A lift table, running on rails, enables vertical positioning of a car chassis to enable weld checks to be carried out, the table being fitted with a full wrap around security skirt.
lenght : 5000 mm
width : 1300 mm
lower position : 470 mm
higher position : 1200 mm
|
|
The wide range of Bolzoni lift tables, with their usual safety and reliability features provide an effective solution to most lifting problems. Vertical double scissor lifts allow to achieve greater stroke without increasing the platform size are mainly used to transfer goods from one level to another.
Capacity from 500 to 3000 kg and wide range of accessories availabl to meet specificic requirmentes and customised solutions and to achieve eaven higer safety functions where conditions require.
Our tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 98/37/EC and Safety requirements for lift tables EN 1570.
|
|
The wide range of Bolzoni lift tables, with their usual safety and reliability features provide an effective solution to most lifting problems including heavy duty applications throughout industry (as part of production process, for machine feeding or stacking etc).
Ergo-lift range is designed as a “work station” to provide improved ergonomic conditions to ensure the health, safety and comfort of the operator together with improved productivity and efficiency.
Capacity from 500 to 10.000 kg and wide range of accessories available to achieve eaven higer safety functions where conditions require.
Our tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 98/37/EC and Safety requirements for lift tables EN 1570.
|
|
The Stowaway features a generous work surface of 72-1/4" x 96-1/2" [1835 x 2450 mm] with a rugged, long-lasting felt top designed to reduce vacuum stick when used for cutting glass or other nonporous materials. High-strength construction provides durability without excess weight. Crossed support legs ensure a rigid and stable, 35" [889 mm] high work surface with a 500 lb [225 kg] load capacity.
The scissor-action tilt design of the Stowaway floats the pivot point forward as the top lifts, providing nearly effortless manual tilt . . . without the extra weight of a counter-balanced system. Bronze pivot bushings and nylon washers make movements smooth and quiet. Rubber rollers support glass, laminate or other sheet materials when tilted and flip out of the way when not needed.
|
|
|
Double Pantograph lifts provide their operators with a high traveling and adjustable work platform. These units also utilize a minimum amount of floor space. This style of lift allows a standard platform size with larger travel. This family incorporates the Autoquip Standard of Quality that is respected worldwide. They bring the work to the worker and increase a workstation's productivity.
|
|
Features:
500 - 2000 lb capacities
30", 36", & 48" vertical travel
Standard hand control
Optional foot control available
Internal 1/3 HP 115/1/60 power unit
Lift time start at 5' per minute
Optional power units available
Hinged platform allows for easy access to cylinders and power unit in the collapsed position
Custom designs available
|
|
Spacesaver Lifts
LSH Spacesaver lifts can be used as personnel work platforms,
as cargo lifts, between levels as mezzanine lifts, and for positioning
test apparatus or tools. These lifts are available with vertical travel
up to 12 feet. Capacities range from 1,000 to 12,000 pounds.
|
|
When our standard products can not meet your requirements, our team specialised in mechanical construction, the technicians of the R&D Department, (equipped with 2D and 3D CAD systems) work with you to design tailor-made products.
The means at their disposal and their combined experience in the field enable us to find the solutions to the constraints of your projects.
The ACI elevation R&D Department, composed of creative and experienced men, will draw 3D drawings taking into account your environment, your specifications and other technical constraints...
|
|
Vision™ Series
Designed from the ground up, Vision lifts incorporate design features
that provide unequaled quality, performance and safety. Vision lifts
increase productivity and reduce worker strain in today’s harsh industrial environments. By lifting and accurately positioning the load, Vision lifts eliminate unproductive lifting and stretching that ultimately leads to worker fatigue and injuries.
|
|
With 2,000, 4,000 and 6,000 lbs. capacities and a variety of platform sizes, these rugged, dependable scissor lifts are perfect for just about any work positioning or assembly application.
Features:
- Choose 24", 36", or 48" vertical travel
- Hand control pendant (foot control option available)
- Heavy-duty hydraulic cylinders with chrome plated rams
- Polyurethane seals on cylinders
- Rugged 3/4" steel plate scissor legs
- Lifetime lubricated bearing on all rollers and pivot points
- Hinged platform for convenient cylinder access
- Supersized 48" x 96" platforms available on standard lifts
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
- Air cushion transporters of all sizes, up to a load of 1000 tons, with friction wheel drive and automatic , proportional air volume regulation of the air cushions and with the following options:
+ direct or remote controlled
+ wireless with infrared - or radio control unit
+ full automatic with induction loop or passive guiding tape
- Air cushion special equipment and devices (also for explosion-protected areas)
Here are some examples of our products based on air-cushion technology:
-Scissor lifts
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double vertical lifting tables are used for heavy and very high lifts.
|
|
Standard and custom table solutions
up to 10 t load, up to 8 m lift
High positioning accuracy and repeatability over the entire lifting stroke
Extreme rigidity of the elevating platform, even where transverse loading occurs due to the design with 4 independent scissor arms and the provision of a scissor pivot bearing point at each corner of the upper frame.
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded structure
High service life, even under rough, continuous operation
Rapid interchange of all drive components
All bearings are lubricated for life
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
APPLICATIONS
Personnel work platforms
Freight lifts between floor levels.
Mezzanine lifts,
Automated palletising systems
Positioning test apparatus or tools.
These tables are available up to 4000kg capacity and 4000mm of lift. Contact Safetech for applications outside this range.
|
|
Up to 50 t load, up to 8 m lift
Short assembly and maintenance times
Durable welded construction
High service life, even for rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability.
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
umerous accessories and special designs round off the product range
|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and pneumatic components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al)
|
|
Up to 10 t load, up to 3 m lift
High positioning, accuracy and repeatability over the entire lifting stroke
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded construction
High service life, even under rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
Hydraulic Platforms
PES model
Hydraulic platforms of this model are realised on customer specifics and used for particular jobs as lifting machines, structures or caissons in variable quotes according to weight and dimension as seen from above.
PED model
On specific customer request it is possible to realise double pantograph hydraulic platforms, used for particular jobs as lifting machines, structures or caissons in variable quotes according to weight and dimension as seen from above.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double horizontal lifting tables are used for lifting long material.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
|
|
Special made lift table with a tilting top for handling euro pallets
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
Our scissor lift tables can be equipped with extras such as turntable, bottom frame for truck handling, bottom frame with wheels, a tilting top platform and rollers.
|
|
Safetech can supply scissor lift tables with tilt decks that both elevate the load and present it to the operator. This option is available on most standard scissor tables and is ideal for use as a workstation where loading or unloading of componentry is required.
Tilting tops can be supplied in a variety of finishes including stainless steel and the deck can be modified to retain stillages, crates and boxes.
CAP.(kg): 1400
VERT. STROKE 915mm
MAX HEIGHT 1290 mm
PLATFORM SIZE 1300x1150 mm
ELEVATION TIME: 42 seconds
TILT 40 degrees
|
|
| ... products without technical information |
| |
|
|