|
|
HAYDON dual motion actuators are based on unique, patented designs and incorporate Haydon’s proven motor technology.
Three sizes are offered from 35 mm to 57 mm, providing independent linear and rotary motion from a compact package.
In certain applications, it is required to have both rotary and linear motion. Such an application, for example, is in the robotic picking and placing of components where it may be required to axially move a component to an insertion position and then rotate the component to screw it in place.
The linear/ rotary unit allows for simplified system design and a reduction in the number of components. It is ideal for use in tight fitting applications requiring precise two degrees of freedom, controllable motion, pick and place equipment, robotics, and a wide array of instrumentation.
|
|
Programmable electric linear rotary actuators with either direct drive or gearbox equipped rotary units. Fully programmable in force/torque, velocity and position with 100% data capture and feed back facility. Standard linear resolution is 5micron with 1micron and 0.5micron options available.
The SMAC unique “Softland” routine within the actuator allows the rod to approach at high speed then land on the surface of a component with a low programmable force. This unique feature is extremely useful whenever delicate or high value components are being handled.
SMAC electric actuators are used widely in packaging, labelling, automotive, SMT, robotics, pharmaceutical, medical assembly, laser cutting, high speed scanning, glass cutting, dispensing, switch testing, spot welding, soldering & measuring applications to name but a few.
|
|
|
Canon Precision's actuator units are developed and designed by utilization and implementation of simulation techniques combined with motors, our core technology. These small sized, lightweight actuators, designed to customer specifications, have already been used in many applications, such as water boiler valve actuators, with very high levels of customer satisfaction.
|
|
|
SKF rotary actuators are designed to provide rotary motion. Fast or slow. Heavy or light duty. Complex or simple arrangements. You can chose from a wide variety of application areas. You will find a solution with both technical and economic advantages. Since the gearing is produced in one stage, through the use of a ball screw, you can also rely on a high degree of efficiency. Select the zero-backlash versions for maximum precision.
|
|
The BEI Kimco Magnetics RA models are used in many applications ranging from Z axis control in semi-conductor lead bonding equipment to gimbal torques and pick-and-place robotics. Actuators feature maximum stroke of +/- 60 degrees, maximum torque of 20nm, through hole and set screw hole for easy shaft coupling and two through holes for field assembly mounting. Choices include arc-segment and cylindrical designs.
|
|
| ... products without technical information |
| |
Standard 2SA50.. 10 to 4000 Nm
Modulating 2SA55.. 15 to 2800 Nm
Speed ranges 1,25 bis 160 1/min
mechanical connection DIN ISO 5210 oder
DIN 3210
SIPOS 5 Flash
• Integrated frequency converter
• Upgradeable functionality
• Valve protection
• High positioning accuracy
• Variable positioning times
• Modular design
• minimal type variance
|
|
Multi-turn Actuator AVA01 ~ AVA10 are installed on the automation of Globe valves, Gate valves, sluice valves, penstock and some dampers.
AVA01 ~ AVA10 combined with BA bevel gearbox for large torque valves.
AVA01 ~ AVA10 combined with ZJ worm gearbox for large torque ball valves, butterfly valves and dampers.
Multi-turn Actuator AVA01 ~ AVA10 torque range is from 45Nm to 2500Nm (35ft-lbf to 1843ft-lbf). For higher torque, they shall combined with BA bevel gearbox or ZJ worm gearbox.
-Voltage Supply: 110Vac ~ 660Vac, 50Hz/60Hz, single or three phase.
-Enclosure Protection: IP68, Double-seated structure.
-Isolation : Class F, Class H (optional)
-Output Speed: 18/21rpm ~ 96/115rpm,
-Optional Function:
Modulating I/O signal 4 - 20mA (AVAM01 ~ AVAM06)
Explosion Proof
Fieldbus System: Modbus, Profibus, etc.
|
|
Electric Oden P30R3, P50R, P220R and P500R control valve actuators for rotary applications.
High precision through the Oden Gear System.
Fits most types of valves using ASAB standardised turning modules and assembly kits
Voltage 24 VDC.
Analogue control 4-20 mA or digital.
Torque up to 400Nm.
|
|
RACO's turn and part-turn valve actuator is a completely electromechanical final control element for operating fittings, valves and flaps, etc. with rotational movement ranging from less than 1 revolution to several revolutions.
The DM IV is assembled from components of the same proven building block system from RACO's electric actuators. This allows us to offer every customer the special turn and part-turn valve actuator for his needs at a low price.
The DM IV consists of the gear, motor and accessories.
|
|
-Explosion Proof rotary Actuators without spring return with torque from 10Nm up to 4500Nm
-For ball valves
-Power Supply from 24V AC up to 240V AC
-On-Off, 3 Point, Modulating
-Auxiliary switches
-Suitable for zone 1,21,2,22
-II 2GD EEx d IIC T6
-IP66
|
|
|
|
|
|
Standard EA Series Rotary Actuators
The standard EA series of actuators contains both gear driven crankshaft and hydraulic powered axial shaft actuators. They can be used with combustion air dampers and a wide variety of low, medium and high torque rotary shaft valve bodies with crankarms. The EA series can accommodate applications requiring position to be held or returned to normal position during power interruptions. Used for two-position floating and proportional electric control, these actuators are employed wherever it is desirable to move a load in either direction or to stop it at any point in the stroke. Typical applications include heat treat furnaces, ovens, heat recovery systems, and water and oil cooling systems. Eight base models plus variants are included in the complete product range, offering a variety of control action, motor voltage and frequency, torque, return action and optional features.
Features
- proportional actuators with builtin feedback potentiometer
- spring return and non-spring return
- 24Vac, 120Vac and 240Vac
- oil immersed gear train
- SPDT auxiliary switch
- compatible with VB series valves
|
|
* Complete, fitted rotary table
* Mechanically and electrically ready for connection
* Hole diameter: 100 mm
* Servo motor ECOSTEP® series 23S
* Reference sensor and holding brake optional
|
|
Frame sizes: 60 mm, 130 mm, 200 mm
Max. speed: 200 r/min (200 mm-type: 110 r/min)
Max. thrust force: 100-4000N
Repetitive positioning accuracy: ±0.004°
Max. permissible torque: 0.9Nm - 50 Nm
Resolution: microstep 0.002-0.04°/step
Power supply: 230V AC for 130 mm/200 mm-type, 24V DC for 60mm-type
Marking: CE, UL and cUL
|
|
DG Series Hollow Rotary Actuators
The ouput table of the hollow rotary actuator allows direct installation of your load.
* Large-Diameter, Hollow Output Table
* Accurate Positioning
* Shorter Positioning Time
* Simple Home Hunting
* RoHS compliant
|
|
|
|
