|
|
SXE2 Series
Ideal for operator workstation protection , finger, hands, arms and legs detection
SXEMC series
Ideal for area, access and perimeter protection |
|
Ideal for the protection of robotised areas, assembly lines, automatic storage.....
The SR4 barrier integrates safety and muting functions.
With a working range of 60m, the SR4O immaterial barrier of type 4 is ideal for the protection of loading and unloading workstations, chariots access areas. IP65, display for installation supply.It's signal importante margin allows to work in difficult environnement.
SX4 series: Ideal for operator workstation, area, access, access with muting and perimeter protection. Micro barrier with excellent performance/price ratio
SR4AP series: ideal for access protection. Simple to install, this type 4 barrier is very ergonomic and ensure the protection of people working on machines.
SL series: Ideal for workstation protection. Autonomous & Intelligent
SXE4CFB series: For applications requiring the introduction of an object while the machine is working
SXE4 series: Ideal for operator workstation protection, acces and perimeter protection as well as area protection
SXE4CM/E series: ideal for operator workstations & access protection
This type 4 multibeams barrier is particulary adapted for machines ,which have an important downtime.The technology used permit to secure small ereas and reduce installation cost. |
|
| Biosystems, LLC, a Bacou-Dalloz® Company, is a leading supplier of gas detectors, respiratory maintenance equipment and monitoring systems, worldwide. Founded in 1981, Biosystems is headquartered in Middletown, Connecticut. |
|
| In many industrial applications, safety is ensured around the clock by a fixed gas detection system. Hazards can have several origins: the release of toxic gases, oxygen deficiency or enrichment as well as the presence of combustible gases and vapors. When detected at an early stage, countermeasures can be initiated to protect personnel, workplaces and equipment. |
|
| Dräger's product range covers a wide variety of types: catalytic bead or infra-red IR sensor technology point or open path detection increased safety, intrinsically safe or explosion proof analog 4 to 20 mA, digital HART or RS 485 signal output with or without local display with or without on-board relays low budget or high end equipment Your local representative will gladly help you determine the right product for your application |
|
The Dräger-Tube system is an established method for measuring and detecting contaminants in the soil, water and air. The Dräger-Tube method of measurement is used for investigating soil pollution, for investigating liquid samples, and for air analysis.
More than 500 substances can be detected and measured using the Dräger-Tube system. Typical applications include the monitoring of workplace air, emission measurements, quality control, process control and monitoring of compressed air for breathing apparatus, as well as environmental and hazardous substance detection applications.
|
|
| Dräger‘s IR gas detectors provide state of the art technology. They perform reliable measurements even in harshest environments and come with a lot of configuration options. Continuous self test routines result in fail-safe operation. |
|
| The need to continuously and simultaneously measure the concentration of several gases arises frequently in industrial and community applications. For these kinds of measurements, Dräger offers a complete product line to provide our customers with custom solutions. |
|
Open Path Gas Detectors measure combustible hydrocarbons along a line of sight, between an optical transmitter and a receiver. The well proven measurement principle is based on IR absorption.
Path lengths up to 200 metres can be monitored with Dräger Safety Open Path Systems. Only this technology is measuring the amount of released gases and thus gives a direct measure of the hazard.
|
|
| Dräger's product range covers a wide variety of types: electrochemical, catalytical or infra-red IR sensor technology point or open path detection intrinsically safe or explosion proof analog 4 to 20 mA, digital HART or RS 485 signal output with or without local display with or without on-board relays low budget or high end equipment Your local representative will gladly help you determine the right product for your application. |
|
| Biosystems, LLC, a Bacou-Dalloz® Company, is a leading supplier of gas detectors, respiratory maintenance equipment and monitoring systems, worldwide. Founded in 1981, Biosystems is headquartered in Middletown, Connecticut. |
|
| Dräger's portable gas detection instruments have been developed to meet the demands of our everyday working lives. Handy and robust, they provide a high technical standard and have been tried and tested in different fields of application. |
|
| Included in the wide product range of Dräger Safety are a reliable line of multi-gas scanners. These instruments enable you to measure electronically several gases and/or vapours simultaneously through the use of two different technologies: Ion Mobility Spectrometry (IMS) and Photo Ionization Detection (PID). |
|
| Biosystems, LLC, a Bacou-Dalloz® Company, is a leading supplier of gas detectors, respiratory maintenance equipment and monitoring systems, worldwide. Founded in 1981, Biosystems is headquartered in Middletown, Connecticut. |
|
| Primarily suitable for confined space entry applications Scott offer a range of self contained, portable instruments for the simultaneous monitoring of up to four gases: typically oxygen, flammable and two toxic gases. |
|
| Dräger's line of single-gas measurement products keep you aware of one specifc gas's concentration consistently and reliably. The versatility of these products allow you to configure the product to meet your application needs. |
|
| Scott offer a wide range of personal hand held gas monitors for the detection of oxygen, toxic and flammable gases. |
|
PCM+ and PCM Transmitter
Combined with its new high performance transmitter the PCM accurately and easily locates and maps the pipeline for up to 19 miles, providing simultaneous measurement of PCM Current and Voltage Gradient, even in areas where there is contact with other metallic structures, interference, or congestion. This eliminates the need for the pipeline technician to perform direct connection 'current spans' and manual calculations to determine CP currents along the pipeline reducing false indications and minimizing unnecessary excavations. Any current leakage fault in the pipeline coating can be further narrowed down to within 3 feet by use of the A frame.
PCM Receiver, Key features
Precision Locator and PCM in one unit
- Accurate, high over-sampled measurements, 96000 Samples/sec
- 8kHz Fault Find
- Improves fault indication integrity
- Minimizes unnecessary excavations
- Identification of pickup/discharging from 3rd party CP Systems
- Low power for full day survey (2 x D Cells) |
|
| ZincTape comprises a layer of 99,99% pure zinc 80 microns thick with 25 microns of adhesive protected by a removable siliconised paper. It is available in rolls or in shapes based on the customer's needs. A feature of the new laminated zinc tape is its electrically conductive adhesive:this is achieved by incorporating a percentage of powdered zinc into the adhesive during manufacture. Since it's very easy to apply ZincTape, our product can be used in different fields, such as automotive and railway sectors, refineries, pipelines, tanks, poles and stakes and others. |
|
For more than 50 years, Dräger has focused on the development of breath alcohol measurement and became one of the biggest suppliers of breath-alcohol measuring technology. Therefore, we can offer you a complete program for many different applications.
Inform yourself about the basics of alcohol measurement and drug testing, learn more about our breath alcohol and drug measurement techniques, and choose the procedure that fits your applications best.
|
|
|
|