|
|
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0 and SAE J2602.The IC furthermore can be used in ISO9141 systems.
Because of the very low current consumption of the TH8080 in recessive state it's suitable for ECU applications with hard standby current requirements, whereby no sleep/wake up control from the microprocessor is necessary.
|
|
|
|
|
|
General Description
The LVT16245 and LVTH16245 contain sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. Each byte has separate control inputs which can be shorted together for full 16-bit operation. The T/R# inputs determine the direction of data flow through the device. The OE# inputs disable both the A and B ports by placing them in a high impedance state.
The LVTH16245 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs.
These non-inverting transceivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT16245 and LVTH16245 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining low power dissipation.
Features
- Input and output interface capability to systems at 5V VCC
- Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH16245), also available without bushold feature (74LVT16245).
- Live insertion/extraction permitted
- Power Up/Down high impedance provides glitch-free bus loading
- Outputs source/sink -32 mA/+64 mA
- Functionally compatible with the 74 series 16245
-Latch-up performance exceeds 500 mA
- ESD performance:
*Human-body model >2000V
*Machine model >200V
*Charged-device >1000V
- Also packaged in plastic Fine-Pitch Ball Grid Array (FBGA)
|
|
|
|
|
|
General description :
The Intersil ISL324xE devices are 2.7V to 3.6V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are POS systems, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic power-down functions, reduce the standby supply current to a 0.5µA trickle. Tiny 5mmx5mm Quad Flat No-Lead (QFN) packaging and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions.
ISL324xE are 3 driver, 5 receiver devices that, coupled with the 5x5 QFN package, provide the industry's smallest, lowest power complete serial port. The 5x5 QFN requires 60% less board area than a 28 Ld TSSOP, and is nearly 20% thinner. These devices also include a noninverting always-active receiver for "wake-up" capability.
The ISL3243E features an automatic powerdown function that powers down the on-chip power supply and driver circuits. This occurs when an attached peripheral device is shut off or the RS-232 cable is removed, conserving system power automatically without changes to the hardware or operating system. It powers up again when a valid RS-232 voltage is applied to any receiver input.
|
|
|
We invented the charge-pumped RS-232 transceiver. Today, we are the leader in copper-wire data transfer, at speeds up to 800Mbps. Our product line includes USB, RS-232, RS-485, LVDS, and IrDA transceivers as well as Logic Level Translators, UARTs, and SCSI termination products.
|
|
|
LVDS & CML (Buffers and SerDes) Nationals leading edge LVDS and CML multi-megabit & -gigabit products include signal conditioners, serializers/deserializers (SerDes), drivers/receivers/transceivers, crosspoint switches, muxes, 1:n repeaters, buffers, and much more that drive LVDS, M-LVDS, PCI Express, SATA, SAS, XAUI, 4G FC, DVI/HDMI, and CPRI signals over low-cost cables and long FR4 traces. Serial Digital Interface and Data Transmission.
|
|
|
|
|
|
AMIS-30600: LIN Transceiver
The single-wire transceiver AMIS-30600 is a monolithic IC that works as an interface between the protocol controller and the physical bus.
AMIS-30660: CAN High-Speed Transceiver
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-30663: CAN High-Speed Transceiver with true 3.3V and 5.0V logic level interface
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-40615: LIN Transceiver
The AMIS-40615 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-40616: LIN Transceiver
The AMIS-40616 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-4168x: Fault Tolerant CAN Transceiver
The AMIS-41682 and AMIS-41683 work as the interface between the CAN protocol controller and the physical wires of the CAN bus.
AMIS-42665: High-Speed Low Power CAN Transceiver
The AMIS-42665 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-42700: Dual High-Speed CAN Transceiver
Controller area network (CAN) is a serial communication protocol, which supports distributed real-time control and multiplexing with a high safety level.
|
|
|
The CS8406 is a digital audio transmitter that supports 192 kHz needed for next-generation audio formats such as DVD-Audio. It enables consumer and professional audio products to exchange 192 kHz S/PDIF and AES/EBU audio data. The CS8406 accepts and encodes audio and digital data, which is then multiplexed, encoded and driven onto a cable/optical transmission interface. Its flexible 3-wire serial digital audio input port, on-chip channel status and user bit buffer memories allow block-sized updates without the need for external memory. The CS8406 also includes an on-chip, low-skew, low-impedance differential-line driver that permits transmission over longer cable lengths.
|
|
|
Industry standard single and dual drivers and receivers for RS232 and RS562 are available for power supplies from 1.8V to 5.5V with high ESD protection. DTE or DCE configurations are available in 3.3V or 5V versions.
|
|
|
Texas Instruments (TI) provides complete digital interface solutions. High-performance solutions that empower you to differentiate your products and accelerate their time-to-market. TI has experience in highspeed, mixed-signal circuits, system-on-a-chip integration and advanced product development processes. Our solutions ensure you receive the silicon, support tools, software and technical documents to create and deliver the best products on-time and at competitive prices.
|
|
USB Connectivity
OEM customers can benefit from MosChip's USB bridge solutions, enabling any PC user, an instant no-hassle way to connect all the next generation computer peripherals. By providing bridging solutions, MosChip can incorporate support for legacy devices as well as bring forward the next generation of USB technologies to the market place.
With MosChip's ever growing array of USB bridge solutions, new peripherals will continue to provide the consumer extended years of use through a standard interface. The next generation of USB On-the-Go (OTG), part of the USB 3.0 specification, will provide instant upgrades that will benefit from a faster and more reliable connection with all the new emerging technologies. This includes new bridging Ethernet and SOC devices as they become available to the market place.
|
|
|
Interface IC solutions ranging from CAN, LVDS, RS-485, RS-232 industry standards to 1394 (Firewire), USB, PCI Cardbus and more.
|
|
| ... products without technical information |
| |
The In-Line pre-set regulator must be mounted directly on the pneumatic tool or system in order to ensure correct pressure, so that possible pressure drops in hoses, tubes etc., do not influence the pressure on the tool or system it self.
The pre-set regulator supplies a constant, exact outlet pressure regardless of the inlet pressure. The pressure is factory-set and cannot be changed. This ensures that nobody can alter the specified pressure.
|
|
|
|
|
|
High tech and sturdy air operated valve, with a floating
plug seal, meeting stringent use criteria.
An extra thick body of the actuator and of the valve, ensuring a good resistance to mechanical and thermal distorsions.
A modular design enabling the following configurations:
Shut off valve DCX3 L
DCX3 T
DCX3 X
Divert valve DCX4 L/L
DCX4 T/L
DCX4 L/T
DCX4 L/X
PFA seals quality ensures a complete sealing at high temperature and a good resistance to aggressive products.
Plastomer seal can be replaced by elastomer seal
Single or double acting connection
With plastomer seal, vertical setting up (especially for DCX4)
Dimensions 1” - 1-1/2” - 2” - 2-1/2” - 3” - 4” - 5” - 6” Material
Body: 316L stainless steel
Shut-off unit: 316L stainless steel
Manual or automatic operating devices: 304 stainless steel
Plug seal: PFA and elastomer
Stem seal: viton, EPDM, silicone
Options
• Signal back equipment on the top of the actuator
• Sterilization of the stem through an upper guide bearing
• External = 47 RA max (150 grit)
• Internal = 32 RA max (180 grit)
Upgraded finishes upon request:
Surface Finish
Variants
Plug and body machined for a metal to metal sealing (without seal)
Elastomer sealing (specific plug with viton, EPDM o-ring)
Manual operator device (instead of the actuator
Tank bottom type
Long stroke valve available upon request
|
|
The range of pressure regulators have a lot of different functions in the commercial refrigeration and airconditioning plant. Capacity regulation, crankcase pressure regulation, receiver pressure regulation, evaporation pressure regulation and condensing pressure regulation.
The valves are delivered with flare or solder connection. Where neccesary the valves are delivered with schraeder valve.
|
|
Back Pressure Valves
* CNC precision machined parts
* Cost effective and reliable
* Pressures from 8-150 psi (350 optional)
* Variety of materials available
* Anti-syphon protection
* Fine pressure adjustment
* Optional air release and gauge port
Sigmamotor back pressure valves prevent siphoning and varying rates of dosage from fluctuating downstream pressure by enacting positive discharge pressure in your metering pump system.
Inside the valve is a diaphragm held in place by a spring which is pressure set. When the pressure is exceeded the PTFE diaphragm is pushed up and material flows through the valve to the injection point. The valves are set at 50psi but are easily adjusted in the field.
|
|
Design:
- Single stage and double stage versions
- Inlet pressures up to 200 bar and 300 bar
- Special regulators for high flow rates
- Available with DIN, CEN, BS and CGA connections
Advantages:
- Extremely high reliability due to central micro filter
- Complete control by excellent visibility of the pressure gauges
- Outlet pressure limiter with double security
- Ergonomical handling and easy operation due to special shape of the hand wheels
Product Range:
- Pressure regulators for oxygen
- Pressure regulators for acetylene, propane, MAPP
- Pressure regulators for hydrogen, methane, town gas, forming gas
- Pressure regulators for argon a.o. inert gases, mixed gases, CO2
- Pressure regulators for nitrogen
- Pressure regulators for compressed air
- Pressure regulators for test gas, carbon monoxide, nitrous oxid
- Accessories, wearing parts
|
|
Extensive technological knowledge accumulated over a long period of
time as a leading designer and manufactured of Integtrated Gas Delivery
Ultra-High Purity (UHP) Valves
Systems and Components, well - integrated and distributed across
multiple industries.
Ultra-Clean Process
CKD delivers high quality products.
|
|
Description:
The SLV Series Signal Lock Valve provides protection in the event of pneumatic instrument signal loss caused by failure of RTU, I/P transducer, pneumatic controller, or other signal generating devices. In the event of instrument signal failure, the SLV-30 will maintain the last position of the control valve and positioner. The Becker SLV-30 can be factory installed or easily retrofit to most existing pneumatic positioner models.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
