|
|
TWC Dia. 6 with 32mm, bend standard 10 with 100mm.
High loads possible, anti-torsion, possible locking end of the road.
Design flat, easy to go up, many possibilities of fixing of the sensors.
Excel thorough obstruction ratio/.
|
|
I -122I -128 I -326I -332I -250I -254I -424I -968
Page
I -1090
Extend Extend Extend Extend Extend
Retract Retract Retract Retract
Remarks
8 to 80
20 to 40 20 to 40 10 to 25 20 to 40 20 to 40
40 to 100 40 to 100
125 to 250
Bore size (mm)
Series/model
Medium bore size cylinder Medium bore size cylinder Linear slide cylinder Medium bore size cylinder Medium bore size cylinder Round shaped medium bore size cylinder Round shaped medium bore size cylinder Large bore size cylinder Guided cylinder
Stroke adjustable
M
L
S
CMK2-P CMK2-R LCY-R SCA2-P SCA2-R SCM-P SCM-R SCS-P ST - P
|
|
This comprehensive range of pneumatic actuators includes conventional ISO and VDMA cylinders, guide units, slide cylinders, compact and clamp cylinders.
|
|
|
|
|
|
ISO/VDMA Series Metric Standard Interchangeable Cylinder
The ISO/VDMA Series is an aluminum body air cylinder line that is designed to meet all your international cylinder requirements. In fact, our ISO/VDMA Series cylinders are designed to meet the requirements of ISO 6431 (International) and VDMA 24562 (Germany). The combination of lightweight aluminum construction and proven reliability makes our ISO/VDMA Series the Superior Interchangeable metric, international standard air cylinder line.
GeoMetric® ISO/VDMA Cylinder
The GeoMetric® Series conforms to the following cylinder specifications: VDMA 24562, DIN/ISO 6431, and ISO/FDIS 15552. One of the most desirable features of the cylinder line is the dual switch/sensor groove design that is a standard offering on all GeoMetric®cylinders. The dual groove design offers great flexibility when mounting switches and sensors to the cylinders. One groove is a traditional round groove and the other is what we call the CombiGroove®. The CombiGroove® is a unique design that will accept round and angular switches/sensors.
|
|
P1D ISO PNEUMATIC CYLINDER
General Construction: Anodized aluminum heads, caps and profiled cylinder body for 32-125mm bores. Anodized aluminum round body and steel tie rods for 160-200mm bores.
Versions: Standard, Removable Gland and Clean (IP65)
Standards: ISO 6431, ISO/DIS 15552, VDMA24562, AFNOR
Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160 and 200mm
Strokes: Available in any practical stroke length
Piston Rods: 1240mm, case-hardened and chrome plated steel (standard)
Piston Rod Ends: 2 standard (male and female), specials to order
Single or double piston rod ends available
Cylinder Mounting Styles: 16 standard
Operating Medium: pneumatic (air), 10 Bar (145 psi)
Standard Fluid: Dry, filtered air
Standard Operating Temperature: -20C to + 80C (-4F to + 176F)
Optional High Temperature Option: -10C to + 121C (+14F to + 250F)
Ports: BSPP standard, other porting styles (NPTF, BSPT, etc.) available
|
|
|
A full line of pneumatic cylinders according to ISO 6431-VDMA 24562 as well as comprehensive accessories are also included in ROSS EUROPA's offering. Do not hesitate to contact us for further info.
|
|
# Minicylinders ISO 6432
# Fixing elements for minicylinders ISO 6432
# Cartridge cylinders
# Round cylinders
# Fixing elements for round cylinders
# Cylinders ISO 6431 VDMA
# Mounting KIT for cylinders ISO 6431 VDMA
# Fixing elements for cylinders ISO 6431 VDMA
# Guiding units
# Compact cylinders
# Mounting KIT for compact cylinders
# Fixing elements for compact cylinders UNITOP
# Short stroke cylinders
|
|
Linear: Basic Air Cylinders
Basic linear air cylinders are used to provide straight-line, in/out linear movement for a variety of applications. Basic air cylinders are available as single-acting and double-acting with single or double rod and non-rotating models.
Body styles include crimped, round, or tie rod. Single-acting cylinders develop thrust in one direction and have lower air consumption compared with the equivalent size of double-acting cylinders. With a double-acting cylinder, air pressure may be alternately applied to provide force in both directions.
|
|
TORK-MATE - Pneumatic Actuators - 890 Series
The Tork-Mate 890 series extended life actuators are ideal for the operation of 90° turn devices such as butterfly valves, ball valves, plug valves, damper valves and other devices. Tork-Mate pneumatic actuators have features that are unique, providing many benefits to the user looking for worry-free service.
The Tork-Mate 890 series actuators feature pinion travel stops that allow a full /-10° of valve travel adjustment. As an option, extended stroke adjustment screws can be added for inexpensive throttling applications.
Special piston seals provide greatly extended life compared to standard O-ring actuators. All other bearings, seals and components have been engineered to provide superior and extended service lives.
|
|
|
|
|
|
Turn-Dex is a rotary actuator with an internal unidirectional clutch. The output shaft rotates in one direction only and remains at end of stroke while the actuator is reversed. Turn-Dex is available in two series: the Comp-Act, incorporating the Comp-Act actuator and the Turn-Act, incorporating the Turn-Act actuator.
Applications Include:
Turntable Work Stations
Drive Conveyor Rollers or Belts
Drive Material Feed Rollers
Ratchet Type Drive
Sheet Feed Material From a Stack
Perstalsis Pump Drive
Low Speed High Torque Motor
Product Mixing
APPLICATION CONSIDERATIONS:
Overrun: The output shaft can be manually rotated only in its drive direction. Large loads may coast after the actuator has stopped. The output shaft cannot be reverse rotated- Forcing it backwards could damage the Turn-Dex.
Accurate & Repeatabte Positioning: Due to the overrun nature of the clutch external stops, brakes, ro«er and detents or shot-pins is required for accurate and repeatable positioning.
Special Options: Turn-Act will provide customized units to fit your specific application needs. Modifications include special shafting, special mounts, dutch housings with shot-pin cylinders, disc brakes and thrust protection. Consult your Turn Act distributor for additional information.
|
|
Jack meeting the standard ISO 24562
Dia. 32 with 250mm.
Complete range.
Tie jack TRB, shaped PRA and PRB, specific jack agroalimentary ICL.
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
Stainless Steel Cylinders
Humphrey sensor switches are two types. Hall effect sensor swithches are electronic switches with no moving parts. They operate only on low DC supply voltage (10 to 28 VDC). Reed sensor switches are electro-mechanical switches which will operate on either AC of DC voltages (5 to 28VDC or 115AC)
|
|
Metric cylinders are standard cylinders that are available in 3 duty types:
Standard Duty
Our most space efficient duty. Short rod bearing and thin piston design. Available as single or double rod end.
Intermediate Duty (Half Husky®)
A combination of our standard and Heavy duty. long rod bearing and thin piston, designed for medium duty service. Available as single or double rod end.
Heavy Duty
Longer rod bearing plus longer piston. Designed for heavy-duty services. Available as single or double rod end.
Metric Options
Metric Accessories
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1" to 'C dimension
2. Switch bracket mounts to tie rod place as required for access and signal phasing.
|
|
NOTES:
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1' to 'C dimension.
2. Switch bracket mounts by strap to cylinder; place as required tor access and signal phasing
|
|
Without corners and sharp edges - and yet outstanding! To ISO 6431/VDMA 24562. Rounded, easy to clean design, with integrated proximity sensor.
• Diameters 32 ... 100 mm
• Stroke length 10 ... 500 mm
• Rod wiper seal made of PUR
• High corrosion resistance
• Food industry approved lubricating grease (to USDA-H1) and rod wiper seal (to FDA)
• Optional: flanged cover screws made of stainless steel
|
|
HMI/HMD Gland Seal Kits Cylinder gland seal kits contain a replacement gland fitted with wiper and rod seals, plus a gland/head O-ring seal.
Supplied ready to fit, gland seal kits reduce machine downtime and avoid the risk of seal damage during installation of seals into the gland grooves.
A typical kit number, eg: RG2HM0221, denotes:
RG ~ Rod Gland kit
2HM ~ HMI/HMD series
022 ~ 50mm dia. rod
1 ~ standard seals, mineral oil, -20°C to 80°C temperature range
|
|
|
|
|
|
Product Details
Cylinder Size: 32 to 100 mm
Operating Pressure: 1 -10 Bar
Low friction Aluminum Body
PU seals & Burnished rod
life > 20000 k
General Features
• Lubrication not necessary (maintain once started oil mist lubrication)
• Compressed air dried to a pressure dew point 3 - 5 degree centigrade admissible
• Operating medium: Compressed air, filtered to minimum 50 ¼m
• Operating pressure range 1-10 bar
• Operating Temperature range - 20 OC to + 70 OC
• Cylinder can be dismantled for servicing
• Life 20,000 km
• Speed 3 m/sec maximum
• Polyurathane seals
• 32 to 100 mm Pneumatic Cylinder
• According to ISO 15552 & VDMA 24562
• Cylinder tube of extruded profile aluminium
• Cushioning adjustable at both ends,
• high energy absorption with PU
• Minimum operating pressure 0.3 bar
• Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160
Reed Switch Option
• The position of the piston of the ROTEX cylinder can be detected by installing a Reed Switch. The switch is a non contact Reed type design and is in Normally open position. The switch closes when it approaches the magnetic field. A permanent magnet is fitted on the piston rod
• Polycarbonate body, with adjustable angular &linear positions
• High glow LED, suitable for outdoor application
• IP 65 Construction
• Universal for AC / DC
|
|
The outstanding short-stroke cylinder. Space-saving - powerful - tried and tested. With sensor slots for SM..-8/SM..-10 proximity sensor.
• Diameters 4 ... 100 mm
• Stroke lengths 2.5 ... 25 mm
• Hole pattern to ISO 6431 for attachment for diameters 32 ... 100 mm
|
|
Diaphragm Cylinders
This 1-1/4" bore diaphragm cylinder is designed for a clamping application with minimal friction losses. Its short overall height allows the cylinder to fit into a tight space with minimal friction.
Stroke length: .12".
Output force will be approximately 15% less than theoretical when units are not extended full stroke.
Cylinders should not be operated without a part being clamped (extension should be limited by customer to maximize life).
|
|
STANDARD ROLLING DIAPHRAGM AIR CYLINDERS
These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force.
SMALL BORE DIAPHRAGM AIR CYLINDERS
Same friction free performance as our larger sized air cylinders.
|
|
Magnetic piston is included as standard.
Rugged body is machined from aluminum extrusion and mounts rigidly to equipment in a minimum of space.
A variety of styles are offered to meet different application requirements.
The direction of rollers are adjustable for use in different applications.
Shock absorbers are available as safety stops.
Magnetic sensors can be mounted on cylinder surfaces when input signals are required for controllers.
|
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports
|
|
|
High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers.
|
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2".
|
|
|
|
