|
|
Saia-motor for positioning, opening/closing or dosing
The new 20mm UAL linear actuator is a small powerhouse. With a resolution of 21 µm per full step, it has a constant force of up to 30 N over the full travel range of 15mm. The compact housing, with a 20mm external diameter, is supported by a direct cable outlet.
The design of the actuator can be engi-neered as a bipolar or unipolar stepper motor, as well as a synchronous motor (max. 50 Vac.). The flexible manufactur-ing of the actuator allows a customer-specific mounting flange and a tailor-made layout design to meet all customer needs. Therefore, the linear actuator has the best preconditions to be used in posi-tioning units, valves and dosing pumps, for example in medical technology or in locking systems. |
|
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
- Up to 50 mm travel in a space saving design
- Non-rotating tip improves motion smoothness and has no wear
- Exceptional position sensitivity
- Adjustable limit switch prevents damage from over-travel
- Convenient manual positioning knob |
|
- Precision linear actuator
- Travel Ranges 10, 25 and 50 mm
- Min. Incremental Motion to 0.05 µm
- Non-Rotating Tip
- Closed-Loop DC-Motors
- Sub-nm Resolution with Optional PZT Drive
- MTBF >5,000 h
M-227 are ultra-high-resolution linear actuators providing linear motion up to 50 mm with sub-micron resolution in a compact package. They consist of a micrometer with non-rotating tip, driven by a closed-loop DC-motor/gearhead combination with motor-shaft-mounted high-resolution encoder. The combination of an extremely low stiction/friction construction and high-resolution encoder allows for a minimum incremental motion of 50 nanometers at speeds up to 1 mm/sec. |
|
Piezo Linear Actuator Solutions:
PI offers the largest selection of research and industrial-reliability Piezo Actuators and Piezo Translators (linear actuators) worldwide. In addition to the hundreds of models presented in this catalog, we manufacture custom designs tailored to customers’ requirements. PI is highly vertically integrated, controlling each manufacturing step from PZT raw materials to finished systems. |
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking |
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Venture Ball Screw Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, and 40 inches (custom lengths available)
30% duty cycle motor rating
Available options;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / 1500 lb dynamic compression or tension
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Efficient, long life Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for use with Rectified 120VAC Gearbox Design |
|
The Eliminator HD™ Heavy Duty ball screw linear actuator provides a strong, durable, and precise linear motion actuator for industrial automation.
The Eliminator HD™ ball screw actuator converts the latest motor technology into high load, high speed, and high accuracy linear motion. Eliminator HD™ replaces hydraulic and pneumatic linear actuators, cams, levers, and linkages, with controllable motion, repeatable position, and easy adjustment.
E-DRIVE Design, Incorporated has shown consistent success in the toughest applications, e.g. High loads, high speeds, high precision, and extreme durability. Precision ball screw systems, tailored for maximum life, load and speed, provide the motion while fully enclosed, thus eliminating contamination related failures. A long bronze nose bearing provides support for the extended piston. Rugged bronze keys in opposing steel slots provide anti-rotation and counter the tangential forces created during high speed, high frequency, and high load operation.
While other actuator designs force a particular motor decision, the Eliminator HD™ is designed to suit virtually any motor, gear box, or gearhead the customer chooses to use. In-line as well as parallel offset configurations are standard with 1:1 and 2:1 synchronous gearbelt ratios available.
Dual, nonferrous dovetail switch tracks provide a simple method of placing and adjusting switches for over travel protection as well as "home" detection. Hall effect type limit switches are available. |
|
ALI2P
ALI2P F (with integrated limit switches)
Max force: 3.500 N
Max speed: 30 mm/s
Stroke: up to 700 mm
12 – 24 - 36 Vdc
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut
|
|
The RACO COMPACT is designed with extremely small dimensions, although it has high linear thrust. Like the %u201Chigh performance series%u201D it also operates completely electro mechanically in a absolute trouble free manner.As a many-faceted electric cylinder for horizontal or vertical linear thrust and tension movements, it offers a smart solution for a great variety of applications with features as listed below.
Features & Benefits:
Robust industrial and compact design
Wide range of performance with many options
Suitable for applications with a high number of switches per period
Low weight for easy installation in your design structure
High reliability and positioning accuracy
Low noise for special noise requirements
Integral closed loop operation available
Maintenance-free through lifetime lubrication
|
|
Linear actuator with DC motor: Adjusting force 200 N; Adjusting range: 10 mm; Adjusting speed: 2,5 mm/s
|
|
Based on modified hybrid stepping motors, our AxialPower Plus motors are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step. The reliability and precision of our AxialPower Plus and L3 motors come from using only the highest quality parts. We use stainless steel to increase the durability of our actuating leadscrews. And our internal rotating nuts are made from a range of engineered polymers for low-friction, smooth operation.
For applications needing a little more force, try our L3 linear actuators. |
|
ALI1
ALI1F (with integrated limit switches)
Max Force: 1.200 N
Speed: up to 90 mm/s
Power source: 12 - 24 - 36 Vdc
Stroke length: up to 300 mm
Accessories: integrated limit switches, encoder
|
|
L02 L03
Max Force: 2.000 N Max Force: 5.000 N
Speed: up to 100 mm/s Speed: up to 30 mm/s
Power supply: 12 - 24 Vdc Power supply: 12 - 24 Vdc
Stroke: up to 800 mm Stroke: up to 700 mm
Accessories: magnetic limit switches, encoder, safety nut |
|
ALI5 90° Version
ALI5 P parallel Version
ALI5 A in line Version
This new family of actuators allow a large number of combinations Forse - speed - dimensions - duty cycle, to meet most applications riquirements.
Max force: 15 kN
Max speed: 250 mm/s
Stroke: up to 1400 mm
1ph-3ph Vac - 90 Vdc
Accessories: magnetic limit switches, mechanical limit switches, encoder, safety clutch, safety nut
|
|
EC1 EC2 EC3 EC4 EC5
Max force: 5 KN /…/ 50 kN
Max speed: 230 mm/s /…/ 15 mm/s
Stroke: up to 650 mm / … / 1800 mm
1ph-3ph Vac
Accessories: integrated limit switches, rotative potentiometer, encoder, hand-wheel
|
|
ALI3
ALI3F (with integrated limit switches)
Max Force: 6.000 N
Speed: up to 35 mm/s
Power source: 12-24-36 Vdc / 230-400 Vac 50-60 Hz
Stroke length: up to 700 mm
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut |
|
ELECTRICAL ACTUATORS
Supply voltage 12÷24V
No load speed 3÷36mm/s
Nominal load 100÷1200N
Duty cycle S3 30÷80%
Standard strokes
50-100-120-150-200-250-300 |
|
Electrical Actuator Microwin
SUPPLY VOLTAGE 12÷24V
NO LOAD SPEED 3÷36MM/S
NOMINAL LOAD 100÷1200N
DUTY CYCLE S3 30÷80%
STANDARD STROKES
50-100-120-150-200-250-300 |
|
RACO's positioning actuator is equipped with RACO's intelligent positioning motor, a three phase asynchronous motor with servo characteristics.The frequency converter, the position sensors and the position control is built into RACO's positioning motor.
This motor is available in three sizes up to 0.5 kW and it can be adapted to all of RACO's electric actuators, rotary actuators and linear actuators with this range of performance.
Benefits:
positioning regulation with position sensors
full motor protection with current and temperature monitoring
all of the sensor and control components built into the motor
programming with PC mask program
in conformity with electromagnetic directive
positioning accuracy < 0.5 mm
50% cost savings in comparison to conventional servos
stop braking as optional equipment
|
|
Linear electric actuator with integral microprocessor
> Limit switch control
> 7 mm/sec 8000 N (standard)
> 14 mm/sec 6000 N (optional)
> High performance
> Quiet running
> Robust
> Insulation class 1
> Certified to IEC 601-1 |
|
Venture DC Linear Actuators are available in both Acme Screw or Ball Screw versions and combine our Quality Linear Actuators with a DC voltage electric gearmotor providing a ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs |
|
|
