|
|
|
The newcomer in the Ortlinghaus line of products for press drives is our hydraulically actuated form - fit linear motion lock, featuring electronic monitoring. This WORLD NOVELTY is used to lock the press ram regardless of it`s current position and can be integrated into the clutch itself. The activation of the linear motion lock can be implemented into the press control or can be activated by the machine operator from his panel. This easy to operate lock presents a maximum amount of safety for manual work within the area of the ram of presses and is regarded as a vital component for modern on the job safety.
|
|
Actuation
Safety Locks are held open by hydraulic (100 bar min) or pneumatic (3,5 bar min) mean and clamp when pressure drops.
Direction of load
In most applications Safey Locks are mounted on a baseplate, so that the load causes a compressive force to the mounting surface. But if the application requires an upward absorption of the load, a flange for attachment is required as well as a special design of the Safety Lock housing regarding the tensile load.
|
|
Hydraulic heavy load brake:
The Braking and Clamping Element with spring-loaded energy storage KBHS.
The KBHS series is a hydraulically operated heavy load brake featuring spring-loaded energy storage.
This function is based on the toggle lever principle. Pre-tensioned stress bolts provide holding force in case of pressure drop. Here the large-surface contact sections, which are equipped with a special brake lining, are pressed directly onto the free surfaces of the section rail.
At a hydraulic opening pressure of 150bar a holding power of up to 40,0000N is achieved.
The KBHS series features a compact design and is suitable from sizes 35 to 125.
The KBHS series is designed for braking and clamping on linear guides. Because of the material combination of the linear guide/contact section, the linear guide won't be damaged by the contact section
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
Nexen's RBR-series rail brakes are ideal for clamping and power-off holding applications. The unique piston design allows high clamping forces and low release pressures.
The RBR is engineered for dependable performance, easy set up and low maintenance.
|
|
Active without pressure – flat design:
The Clamping Element for torque take-up with spring-loaded energy storage TP
The TP series is a pneumatic clamping element for torque motors or for rotational axes.
It works with a newly developed spring-loaded energy storage system.
Torque take-up occurs inside the TP which excludes wear on the driven shaft.
TP achieves high holding torques at a pneumatic opening pressure of >4 bar.
Due to high rigidity, positioning accuracy is exact in use.
The zero maintenance TP is suitable for shaft diameters of
Ø50 to Ø320 mm.
It is characterised by easy assembly and a flat design.
|
|
Active without pressure:
The Clamping and Braking Element including spring-loaded energy storage MB
The MB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
As a specific feature it has three pistons connected in a line.
This arrangement allows use of a stronger spring at 4.5 bar than the BW series does. The stronger spring-loaded storage permits holding forces up to 3,800 N.
The MB series is designed for braking on linear guides.
Because of the material combination of the linear guide/contact section,the linear guide won't be damaged by the contact section.
|
|
|
|
|
|
Active without pressure - compact and powerful:
The Clamping and Braking Element with spring-loaded energy storage UB.
The UB series combines the technology of our BW, TK and MB series. The rigid housing and central position of the wedge slide gear achieve very high supporting forces. The mounting hole template enables the BW, TK and MB series to be substituted. The UB series is based on a dual-effective wedge slide gear with spring-loaded energy storage for clamping and braking without pressure.
This arrangement of three pistons connected in a line allows use of a stronger spring at 5.5bar.
The stronger spring-loaded storage permits holding forces up to 9,000 N. Positive fit contact sections mounted within a strong casing guarantee high axial and horizontal rigidity.
The UB series is designed for braking on linear guides. Because of the material combination of the linear guide/contact section, the linear guide won't be damaged by the contact section.
In order to exclude damage from contamination with chips (chips between contact section and linear guide), the elements can be fitted with original seals (seal kit) from the respective linear guide manufacturer and longitudinal seals as accessories.
When used in harsh work environments or with cooling liquid, the seal kit should be used as well.
|
|
The clamping elements react in the shortest possible response time by the patented pneumatic pre-loading of the system of the spring plates in the diaphragm.
These safety systems are permanently operational for the maximum machine protection.
|
|
Hydraulic clamps and clamping cylinders
single or double acting
max. clamping forces from 2.2 to 50 kN
max. operating pressure from 100 to 500 bar
max. clamping strokes from 3 to 16 mm
|
|
REMARK
1 : The mounting surface finish should be no rougher than Rz 6.3 (ISO 4287:1997).
2 : Be sure to use O-ring included at all times.
3 : Tightening torque for mounting should be as per the above table.
4 : The hardness at the top portion of round top type plunger is HRC54.
|
|
* Maximum operating pressure 500 bar
* Short delivery times - Large stock range
* Piston diameters from Ø25 mm to Ø40 mm
* Rotates to left or right with 45, 60 or 90° angle of rotation
* Integrated in a tool without lining
|
|
|
|
|
|
030 - SELECT Hydraulic Swing/Pull Clamp
SELECT hydraulic threaded body swing clamps are high quality and cost effective alternatives to competetive brands.
- Range of sizes
- available in sigle or double acting versions
- field adjustable swing direction
- MRO interchange
035-1 - SELECT Pneumatic Swing/Pull Clamps
SELECT line of pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. The fast acting clamps can generate up to 50 pounds of clamping force from shop air.
- Swing motion available in 0, 45, 60, and 90 degrees
- Four styles of arms
- Double-locked arm design is bolted to piston shaft and around shaft diameter for extra rigidity
- Double-acting design
727D - Hydraulic Swivel Clamping Cylinder
Hydraulic swivel clamping cylinders are particularly designed for applications which require high clamping forces and easy loading of workpieces in confined spaces.
- swivel left
- max. clamping force 475, 850, 1250 daN
- max. operation pressure 250 bar (3625 psi)
|
|
|
|
|
|
Logansport Hydraulic Cylinders
Ideal for horizontal, vertical or inverted applications. Eliminates many parts associated with closed center rotary inlets.
Features Include:
Simple Inlet Design
Constant Hydraulic Flow
80 Bar Max. Pressure
Up to 8,000 RPM
Standard Built in Trapping
Optional Trip Rod and Thru Port
Inlet Assemblies:
The inlet assembly, sometimes called the distributer, can be designed in two ways. It can have a fixed position in relation to the piston housing, or it can float with the stroke of the cylinder (a "reciprocating" inlet).
Inlet Assemblies
Third port for air or coolant thru
Solid Trip Rod, which will sense cylinder position. Adjustable proximity switch holders
Thru hole trip rod for air or coolant thru. Will sense cylinder position utilizing adjustable proximity switch holders
Piston:
Cylinders can be designed with a single piston, two pistons connected in one housing (tandem), an open center piston (thru-hole), or with two different size pistons, in seperate housings, which can be energized independently (duplex).
|
|
| ... products without technical information |
| |
Using the CENTOR technology, the CENTOR W digital torque gauges have a very large graphic display and show a maximum amount of information for more efficient measuring: they show the current reading and the peak value at the same time, and a bar graph to show the operator whether they are close to their maximum capacity. If necessary, the backlighting can be used to further enhance reading comfort.
Its advanced measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.5% FS.
Many other functions complete the possibilities of the gauge:
the Set point functions can be used to carry out “OK, NOK” tests: a symbol appears on the display.
The fully programmable RS232 output sends the data to a PC. A digimatic output can be used with Mitutoyo statistical printers.
|
|
|
With the boxes of measurement of couple Weber: finished the long discussions concerning the couples of screwing.
|
|
IMADA has wide range of attachment for various applications.
We also can produce special attachment as customized version.
Please request special gripping fixtures.
|
|
Equipped with a built-in Transducer the EZ serie may be used to calibrate quickly and accurately every kind of fastening tools (torque wrenches, electric and air screwdrivers).
Memorized readings can be easily transfered to any kind of computer or printer through RS 232C port. With The EZ SMART version enjoy extreme measuring flexibility and full traceability of your tools thanks to additional functionalities.
External transducers may be connected to the EZ SMART becoming a small-sized portable torque readout to achieve torque audit along the assembly line!
- Easy to use scroll menu
- Real time clock
- 500 datas FIFO memory capacity
- RS232 output
- Mini/ok/Maxi torque limits
- Peak, first peak, track measuring mode
- Automatic and manual reset
- Calibration display
|
|
|
Proper torque measurement is critical in many assembly operations. AIMCO provides expertise and measurement equipment for all three phases - before, during, and after assembly. Tool testing and capability studies can be easily performed in the tool crib or lab. Fine tuning of torque settings and process verification are achieved on the assembly line with rotary transducers. Use our complete line of electronic wrenches for final residual torque testing.
|
|
| ... products without technical information |
| |
Twist Clamp Cylinders
Combines linear and 90-degree rotary motion with an internal pin/cam mechanism.
Rotary action moves a clamping arm away from the workpiece, allowing for easy loading and unloading of parts.
|
|
|
|
|
|
Logansport Pneumatic Cylinders
Ideal for horizontal or vertical applications. Eliminates many parts associated with closed center rotary inlets.
Features Include:
- Simple Inlet Design
- Constant Air Flow
- Up to 7,000 RPM Capability
- Standard Built in Trapping
- Optional Trip Rod and Thru Port
Inlet Assemblies:
The inlet assembly, sometimes called the distributer, can be designed in two ways. It can have a fixed position in relation to the piston housing, or it can float with the stroke of the cylinder (a "reciprocating" inlet).
Inlet Options:
Third port for air or coolant thru (view schematic)
Solid Trip Rod, which will sense cylinder position. Adjustable proximity switch holders (view schematic)
Thru hole trip rod for air or coolant thru. Will sense cylinder position utilizing adjustable proximity switch holders. (view schematic)
Trapping
This safety feature allows the cylinder to remain pressurized, and the chuck to maintain clamping pressure, in the event of a power loss.
Viton Seals
The seals keep compressed air or hydraulic fluid captured within the cylinder. The seals are designed to allow movement and support between internal components
Piston
Cylinders can be designed with a signle piston, two pistons connected in one housing (tandem), an open center piston (thru-hole), or with two different size pistons, in seperate housings, which can be energized independently (duplex)
|
|
| ... products without technical information |
| |
Hand Tools for Band and Buckle
Part No. Description
C00169 BAND-IT Tool - For band widths from 3/16" to 3/4"
C00369 BAND-IT Heavy Duty Tool - For band widths from
3/16" to 3/4"
C07569 Bantam Tool Low torque - For band widths from 3/16" to 3/4"C07569 Bantam Tool Low torque - For band widths from 3/16" to 3/4"
C08569 Bantam strapping tool - Low torque for band widths from
3/16" to 3/4"
C40099 Ratchet Tool - For band widths from 3/16" to 3/4"
Ratchet style alternative to C00169
G40269 Giant Tool - For use with only Giant Band from 3/4" to 1 1/4"
J02069 Pok-It II Tool with cutter - For band widths from 3/16" to J02069 Pok-It II Tool with cutter - For band widths from 3/16" to
3/8" wide3/8" wide
J07599 Thrifttool®, 10 Pack - Applies tension, 3/16" - 3/8"
wide band, Band-Fast, Band-It Jr. Clamps
|
|
|
constant tension hose clamp, responds to temperature and pressure changes, low profile and high performance
|
|
• Huck BOM
-Very high strength/diameter ratio – can be used in demanding structural applications as an
alternative to threaded fasteners or welding
-Very high joint tightness when compared to conventional blind fasteners
-Very resistant to tampering, extremely hard to remove
-Excellent gap closure capability
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm
|
|
... see all the products in the category
Rivets
|
Valves and jointsInfo-Catalogue
Control and regulation of liquid.
Orobica Plast-Gom produces gaskets for butterfly valves, joints according to DIN - ISO - CLAMP - S.M.S. - BS - IDF standards for alimentary, pharmaceutical and chemical industries.
|
|
How do you get the desired bolt load up to 90% of yield precisely with a nut of same size as the nut it replaces? With HYTORC!
If Time is of Essence and Bolt Load Precision is a Must, the HYTORC-CLAMP® is the Answer! A simple, 3-part nut has an outer sleeve that turns on an inner sleeve connected with the bolt and on a washer spline-connected with the inner sleeve.
A high-speed HYTORC tool stops the inner sleeve from turning while turning the outer sleeve at a known friction. The inner sleeve is pulled up, the bolt is stretched to within + 4% of the preset Bolt Load, Side load- and Torsion-free.
|
|
|
... see all the products in the category
Nuts
|
|
|
see the results for the following category : 
