|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
Image Desc
click to enlarge
Image Desc MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
|
Aerotech's "U-channel" brushless linear servomotors have proven ideal for robots, actuators, tables/stages, fiberoptics/photonics alignment and positioning, assembly, machine tools, semiconductor equipment, electronic manufacturing, vision systems, and in many other industrial automation applications. Aerotech linear motors are direct drive and consist of a noncontacting forcer coil and "U-channel" rare-earth magnet track. This design eliminates backlash, windup, wear, and maintenance issues associated with ball screw, belt, and rack and pinion based motion control and positioning systems. The noncontact design of the forcer and magnet track results in a maintenance-free system.
|
|
|
|
|
|
The 3 phase brushless (or AC servo) linear motor is ideal for high force, long stroke, closed loop servo, and linear motion applications. They can be used at speeds up to 240 in / sec [6 m / sec]. They are capable of very precise position, velocity and acceleration control when coupled with a linear encoder.
The 3-phase coil assembly can be commutated trapezoidally using optional Hall Effects or sinusoidally using software commutation in conjunction with the appropriate motion controller and sinusoidal amplifier.
The short laminated moving coil assembly moves over the top of a magnet assembly. A customer supplied bearing system is required to guide the moving coil assembly and to maintain a .030" [0.75 mm] clearance between the coil and the magnet assembly.
There is a large magnetic attractive force between the coil and magnet assembly. The bearing system must be able to withstand this force in addition to whatever payload is being carried.
The power to the motor (from a customer supplied PWM 3 phase brushless servo amplifier) is supplied to the moving coil via a power cable.
The motors are available in 6 different widths and 4 different coil assembly lengths.
Advantages:
* Very low cogging
* High speed and accelerations of heavy payloads
* Capable of high forces
* Uses standard 3 phase brushless amplifier
|
|
Linear synchronous motor series LSM
The linear synchronous motors Ruchservomotor JV are guarantee:
high force density in compact dimensions(peak linear force up to 7600N),
high velocity(up to 5m/s)
and accelerations (up to 14G *).
Linear Synchronous Symmetry Motors LSSM
The linear synchronous motors Ruchservomotor JV because of special design features are guarantee high force dencity in compact dimensions(peak linear force up to 7600N), high velocity(up to 5m/s) and accelerations(up to 14G at user payload=0kg).
Multiples forcers can be operated independently on one magnet way. The motors can be join in serially or in parallel for obtaining higher linear force.
|
|
SL2 series
The SL2 synchronous linear motor with convection cooling is practically maintenance-free and offers maximum reliability and availability, high control quality, speed and accuracy.
SL2 synchronous linear motors are available in three models for speed classes 1, 3 and 6 m/s: SL2 Basic, SL2 Advance System and SL2 Power System. For longer travel distances, secondaries are available in different lengths and can be easily lined up with one another. The SL2 Advance System features a motor cooling unit, which provides even better cooling than SL2 Basic. A forced-air cooling fan gives the SL2 Power System a further power boost.
Your advantages
- SL2 motors save time during project planning
- Precise, reliable and safe at any speed
- Virtually maintenance-free
|
|
Features specific for this product line
> direct electric drive
> high speed
> without reduction gear, no play at direction reversal
> no rotor losses
> with NdFeB magnets
Features of Oswald motors
>compact, robust, high force density
>maintenance-free or low maintenance
>low inertia, dynamical
>long life
>Made in Germany
Technical spezification
force at continuous duty 100 - 10.000 N
speed up to 10 m/s
stroke modular, arbitrary
cooling air or fluid
protection class IP54 (primary, secondary windings)
|
|
|
|
|
|
Baumüller linear motors have been designed for use as direct drives with synchronous motors. Customized motor concepts can be created using a modular system, meaning that Baumüller linear motors can achieve maximum thrust forces of up to 14,750 N.
Baumüller linear motors are synchronous motors. They consist of a primary with a wound lamination stack and a secondary with permanent magnets (magnetic strip). The primary is laminated with carbon fiber. This allows Baumüller linear motors to achieve consistently high stiffness and maximum continuous force, thanks to their improved capacity for heat dissipation.
LSA - The plug & play solution
LSE 10 - The customized solution
LSC - The ironless solution
LSE 50-90 - The solution for logistics applications
The scope of products and services provided is not merely limited to linear motor components. On the contrary, Baumüller offers the user a plug & play solution with clearly defined interfaces that can be immediately connected to his machine, in the form of a very compact and flexibly designed complete linear axis, LSA, which is essentially comprised of linear components, a guidance system, a mechanical structure, and a length measuring system.
|
|
|
|
|
|
Linear Brushless Motors Series DM
Key Features:
· Symmetric forcer
· Dual magnet track linear motor
· Steel core for high force density
· Lo-Cog for smooth motion
· Built-in thermal sensors
· Hall-effect sensors
· Water cooling option
· Modular magnet track for unlimited travel
· Magnets covered by stainless steel strip
Iron core linear motor DM Series is designed to provide the highest force density in the linear motor applications. Unlike conventional iron core motors, DM motors have dual magnet track to balance magnetic attraction forces and to remove any forcer magnetic preload from the bearings. This feature provides for quite operation with smaller linear bearings without concern for bearing life. Linear motor magnetic structure of the forcer also optimized to provide low cogging. Forcer have thermal sensors in a compact structure as well as Hall-effect sensors and can be provided with water cooling option. These motors are ideal in applications to move large payloads without effecting bearing life. Magnet tracks are stackable for any travel length.
|
|
The new generation of linear motors – one-of-a-kind worldwide – combines extremely high continuous and maximum force with compact construction and the lowest possible force ripple in a single series.
MLP/MLS Series – Synchronous Linear Motors
Highly-dynamic and precise
IndraDyn L is based on the continued development of Rexroth's industry-proven linear motor technology. Select from real-world sizes and lengths:
* Primary units with standard stainless steel housing and integrated liquid cooling
* Optional thermal-encapsulation for the most stringent temperature stability requirements
* Secondary units in 3 lengths, with stainless steel cover plate
|
|
| ... products without technical information |
| |
|
|
|
|
Conventional DC motors use a stationary magnet with a rotating armature combining the commutation segments and brushes to provide automatic commutation. In comparison, the brushless DC motor is a reversed design: the permanent magnet is rotating whereas the windings are part of the stator and can be energized without requiring a commutator-and-brush system. Therefore this motor type achieves very long, trouble-free life even while operating at very high speeds.
Key Attributes:
- Frame sizes range from 12.7 mm (0.5 in.) to 58 mm (2.3 in.)
- Speeds up to 100 000 rpm
- Torque range of 3.3 mNm (0.32 oz. in.) to 316 mNm (44.7 oz. in.)
- Speed, direction, current control option are available
- Autoclavable features available
- Versions without hall sensor
- Versions with hall effect sensors
Characteristics:
- Essentially Linear torque/speed curve, with torque proportional to current and speed proportional to voltage
- No mechanical commutation via brushes
- Improved heat dissipation
- No detent torque
- Tipically used in application with variations of speed or load
- Typically used in incremental motion
Advantages:
- Ease of speed and position control
- Very long life, high reliability, insensitive to environment (no arcing), motor is dust free with reduced audible and electrical noise levels
- Overload capability
- Excellent velocity smoothness
- Very simple commutation circuitry
- Very precise speed and position control
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
We are pleased to introduce the new BLDC brushless micro gearmotors. This new series completes Intecnos range of DC micro gearmotors and offers ideal solutions for sectors such as industrial automation, automatic doors and windows, vending and many others.
The BLDC motors from the BL series are available in 3 sizes (torque from 0,05 Nm to 0,43 Nm) and they can be supplied with an integrated (IE version) or external drive. They are compact and low-cost being equipped with Hall sensors. These motors have a low voltage 24V, which optmises safety in the workplace, particularly in applications where the worker can be in direct contact with the motor.
To complete the gearmotor, we would use the reliable micro planetary gearbox from our standard series.
Gearmotors made up of BL motors and LN (low noise) gearboxes are particularly suitable for applications in the medical field and for applications that require a controlled movement.
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
|
|
|
|
Conventional DC motors use a stationary magnet with a rotating armature combining the commutation segments and brushes to provide automatic commutation. In comparison, the brushless DC motor is a reversed design: the permanent magnet is rotating whereas the windings are part of the stator and can be energized without requiring a commutator-and-brush system. Therefore this motor type achieves very long, trouble-free life even while operating at very high speeds.
Key Attributes:
- Frame sizes range from 12.7 mm (0.5 in.) to 58mm (2.3 in.)
- Speeds up to 100 000 rpm
- Torque range of 3.3 mNm (0.32 oz. in.) to 316 mNm (44.7 oz. in.)
- Speed, direction, current control option are available
- Autoclavable features available
- Versions without hall sensor
- Versions with hall effect sensors
Characteristics:
- Essentially Linear torque/speed curve, with torque proportional to current and speed proportional to voltage
- No mechanical commutation via brushes
- Improved heat dissipation
- No detent torque
- Tipically used in application with variations of speed or load
- Typically used in incremental motion
Advantages:
- Ease of speed and position control
- Very long life, high reliability, insensitive to environment (no arcing), motor is dust free with reduced audible and electrical noise levels
- Overload capability
- Excellent velocity smoothness
- Very simple commutation circuitry
- Very precise speed and position control
|
|
22B-D Series Parallel Shaft BLDC Gearmotor
Horsepower: 1/16 HP
Rated Torque: 5.8 to 40 lb-in
Speed: 14 to 417 RPM
22B-Z Series Parallel Shaft BLDC Gearmotor
Horsepower: 1/16 - 1/11 HP
Rated Torque: 10 to 100 lb-in
Speed: 14 to 417 RPM
22B/SR-D and 22B/SR-Z Series INTEGRAmotor Parallel Shaft BLDC Gearmotor
Control Type: Analog Input (0-5 V)
Horsepower: 1/16 - 1/11 HP
Rated Torque: 5.8 to 100 lb-in
Speed: 0.7 to 417 RPM
22B/FV-D and 22B/FV-Z Series INTEGRAmotor Parallel Shaft BLDC Gearmotor
Control Type: Digital Input (PWM)
Horsepower: 1/16 - 1/11 HP
Rated Torque: 5.8 to 100 lb-in
Speed: 0.3 to 417 RPM
34B-W Series Parallel Shaft BLDC Gearmotor
Horsepower: 1/5 HP
Rated Torque: 5.8 to 100 lb-in
Speed: 0.6 to 417 RPM
34B-E and 34B-F Series Parallel Shaft BLDC Gearmotor
Horsepower: 1/16 - 1/11 HP
Rated Torque: 25 to 350 lb-in
Speed: 8.3 to 500 RPM
|
|
Voltage: 230 V (Supply Voltage Electronic Controller)
Frequency: 50 or 60 Hz
Power: 60 - 500 Watt
Motor Speeds: 1300, 2000, 3000 min-1
Type of protection: IP 54
Ratios:
Type 12 - 5:1 up to 55:1
Type 13 - 5:1 up to 56:1
Type 14 - 6,75:1 up to 60:1
|
|
High torque, excellent true running, low speeds
Brushless, electronically commutated permanent-
magnet motor.
3 sizes: 5, 7, 8
EK 501 to EK 803
6 sizes: 2, 3, 4, 5, 7, 8
ED 202 to ED 808
Gear sizes: P2 – P9
Accelerating torque:
18 – 3,000 Nm
Gear ratio range: 3 – 100
Backlash: < 3 – 8 arcmin
|
|
SL Series brushless servo-gearmotor
Frame Size 2 – 4.5 inches, 51 – 114 mm
Maximum Continuous Torque Rating 4696 lbf-in, 531 Nm
Maximum Motor Speed 5000 rpm
|
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with brushless DC Motor.
G46 Compact right angle gearboxes to 20Nm torque.
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
CTM1
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 250 Watts
* Maximum Output Torque: 1Nm
* Speed Range: 3790 RPM
* Size Diameter: 87mm
* Size Length: 66mm
* Weight: 1.16Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
CTM2
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 350 Watts
* Maximum Output Torque: 1.5Nm
* Speed Range: 3700 RPM
* Size Diameter: 87mm
* Size Length: 72mm
* Weight: 1.92Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
minimum order quantity: 100 units per annum
|
|
|
Geared motor with bs series brushless servomotor, integrated with precision planetary 1-2 stage reduction unit. Reduced backlash available on reguest.
|
|
Electronically commutated permanent magnet EC motors
EC direct current motors have very long lifetimes due to their electronic commutation (normally over 10,000 hours). Speed control can be realised via the electronics integrated in most models. Electronically commutated motors normally provide high torque even at lower speeds.
DC gear motors are available even as external and internal rotors.
The external rotor is characterised by a high torque and a high mass inertia of the rotor.
The internal rotor captivates by its excellent dynamics.
|
|
| ... products without technical information |
| |
 see the results for the following category : DC drives |
|
|
