|
|
The POSIMAG length measuring system comprises an MR scanning head and a magnetic dimensional scale. The position is determined without contact and thus without wear or tear. This measuring setup supports resolutions in the µm range.
POSIMAG is suitable for linear, angluar and speed measurements.
Technical advantages:
Sturdy construction, contact-free and wear-free, shielded metal housing, protection category up to IP67, signal processing as standard with encoders, distance between the MR sensor head and the magentic strip up to 2 mm, measuring lengths of up to 30,000 mm.
Thanks to its special properties, POSIMAG is ideal for many industrial applications in the production of machinery, plants and precision equipment as well as research. For example: Metal and wood processing, manual tasks in handling systems, positional checks for linear units, quality-control systems for sheet metal, punches and presses.
|
|
Hall sensors have proved to be the most reliable technology for revolution measurement. DIS has been using Hall technology for over 10 years in the Quadro-Flux series. There is choice from a range of I/O circuits and housing options to measure revolution up to 25 KHz. For direction indication or fail safe options we offer dual circuits for phase shifted signals.
Measuring range: 0 - 25 KHz max.
Supply voltage: 5Vdc of 10 - 30 Vdc
Output: PNP, NPN or totem pole
Temperature range: -25 tot + 150ºC
Protection class: < IP68 (submersible)
|
|
Rotary magnetic coders
The magnetic coder of impulses MDFK consists of a polar wheel and a magnétorésistif detector. He lets himself install in the same way that a conventional incremental coder.
Advantages:
- easy assembly, coder of an advantageous price
- recognition of the direction of rotation
Magnetic coders
Detectors with magnetic fields optimized for rotary and linear applications.
Potentiometer without contact
The magnetic detectors of series MDRM & MDFM are usable like potentiometers without contact. A magnetic rotor placed near the active face of the detector makes it possible to generate the output signals.
Advantages:
- usable in hard environments
- no part moving
- output signals Sine/Cosine
- linear 1... 9 VDC/4... 20 my in absolute values
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. Thereby a resolution of up to 0,005 mm and a measuring accuracy of up to 0,05 mm is realisable.
Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guraranted.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled.
Besides distance and angle also rotation can be recorded. Special sensors register the incremental segmentation of magnetic rings with a resoultion of up to 20.000 pulses per revolution. Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guaranted.
|
|
The LM10 features a compact sealed readhead that rides at up to 1.5 mm from the self-adhesive magnetic strip scale, with up to 100 m travel.
Simple to install, the LM10 features an integral set-up LED on the readhead, wide installation tolerances and an applicator tool for the adhesive-backed magnetic scale. A bidirectional reference is provided that can be actuated either by a preset mark integrated within the scale or by adding a reference sticker on top of the scale with the help of a self aligning installation tool.
The encoders come in digital or analogue output variants and offer a range of customer selectable resolutions 1 µm, 2 µm, 5 µm, 10 µm, 20 µm and 50 µm. At 1 µm the LM10 offers a maximum velocity of 4 m/s.
Engineered for extreme service, the solid-state LM10 linear encoders operate from -20 °C to +85 °C, have water-proof sealing to IP68, and are highly resistant to shock, vibrations and pressure. The robust magnetic scale is also resistant to a range of chemicals commonly found in industry. The non-contact, frictionless design eliminates wear while reducing hysteresis for high precision at high speeds and acceleration.
LM10 encoders bring reliable solutions to tough, hard-working applications including woodworking, stone-cutting, sawing, metalworking, textiles, packaging, plastics processing, automation and assembly systems, water-jet cutting, and electronic chip/board production.
|
|
The LM10 features a compact sealed readhead that rides at up to 1.5 mm from the self-adhesive magnetic strip scale, which brings 100 m travel.
Simple to install, the LM10 features an integral set-up LED on the readhead, wide installation tolerances and an applicator tool for the adhesive-backed magnetic scale. A bidirectional reference is provided that can be either actuated by a preset mark integrated within the scale or by adding a reference sticker on top of the scale with the help of a self aligning installation tool.
The encoders come in digital or analogue output variants and offer a range of customer selectable resolutions 1, 2, 5, 10, 20 and 50 µm. At 1 µm the LM10 offers a maximum velocity of 4 m/s.
Engineered for extreme service, the solid-state LM10 linear encoders operate from -20 °C to +85 °C, have water-proof sealing to IP68 and are highly resistant to shock, vibrations and pressure. The robust magnetic scale is also resistant to a range of chemicals commonly found in industry. The non-contact, frictionless design eliminates wear while reducing hysteresis for high precision at high speeds and acceleration.
The LM10 encoders bring reliable solutions to tough, hard-working applications including woodworking, stone-cutting, sawing, metalworking, textiles, packaging, plastics processing, automation and assembly systems, laser/flame/water-jet cutting, electronic chip/board production etc.
|
|
Merit ME110
Battery powered digital readout with the following fixing ways :
1) panel mountable by relevant brackets
2) surface mountable by metallic supports
Flexible cable max lenght 2 meters.
Magnetic reader head with small dimension.
Fixing by M3 or M4 screws.
Wide aligning tolerances.
To be used with magnetic tape Givi MP200.
Resolution (programmable): 1 - 0,1 - 0,05 - 0,01 mm
0,01 - 0,001 - 1/16 - 1/32 - 1/64 inch
1° - 0,1° - 0,01° - 0,001° angolare
Accuracy: ± 30 µm
Repeatibility: ± 1/2 digit
|
|
MTS
High precision and reliability reading transducer.
Main features:
- Strong and compact metal case.
- Advanced technology in small dimensions.
- High resistance to vibrations and accelerations.
- Protection IP67 (according to the norm DIN 40050/IEC 529).
- Wide range of available resolution.
MP200
Magnetic band GIVI MP200 is composed by a magnetic strip, which is polarized at regular distances of 2+2 mm and supported by a stainless steel carrier.
Extremely easy mounting to the operating machine. As an optional, the magnetic band is supplied with a magnetically transparent stainless steel cover for physical protection; for its fixing an adhesive tape is pre-mounted
|
|
Principle of operation: detection without contact of a polarized magnetic tape with constant step assembled on a tape support out of stainless steel equipped with an adhesive face for fixing on the machine.
Length of measurement: up to 50 measure
Resolution: 10 microns, precision + 15 microns/measures
Rate of travel: 10 measure/second
Metal sensor moulded IP 67
Food 5 VDC or 10-30 VDC, 2 output signals in squaring with their complements
|
|
The Idemag WPR Non Contact Interlock Switch range offers a robust wide fitting and provides environmental protection up to 80C. They are suitable for high pressure hosing (IP66/67) and are resistant to many organic and non organic chemicals.
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, and a high tolerance to guard misalignment.They are designed to fit to medium to large guards.
They offer 2NC high power (up to 2A.) circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1. An auxiliary signalling contact is available. The high power components and de-rating with an internal fuse mean they may be suitable for use in lower risk applications (subject to a risk assessment for the application).
|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline fitting and provides environmental protection up to 80C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
|
|
Safety coded magnetic sensor, SR-SM series
Pizzato Elettrica offers on the market the new safety magnetic sensor SR-SM series.
Safety magnetic sensors are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
• Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
• Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
• Stainless steel fixing plates to avoid that the sensor could be damaged during the installation.
• Possibility of connection in series more sensors also with mechanical switches.
• Actuation from two different directions.
• Available with cable or M8 integrated connector.
• Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit our web-site www.pizzato.com or ask for special documentation.
|
|
The Idemag WPR Non Contact Interlock Switch range offers a robust wide fitting and provides environmental protection up to 80C. They are suitable for high pressure hosing (IP66/67) and are resistant to many organic and non organic chemicals.
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, and a high tolerance to guard misalignment.They are designed to fit to medium to large guards.
They offer 2NC high power (up to 2A.) circuits and will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1. An auxiliary signalling contact is available. The high power components and de-rating with an internal fuse mean they may be suitable for use in lower risk applications (subject to a risk assessment for the application).
|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline fitting and provides environmental protection up to 80C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1.
|
|
Safety coded magnetic sensor, SR-SM series
Pizzato Elettrica offers on the market the new safety magnetic sensor SR-SM series.
Safety magnetic sensors are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
• Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
• Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
• Stainless steel fixing plates to avoid that the sensor could be damaged during the installation.
• Possibility of connection in series more sensors also with mechanical switches.
• Actuation from two different directions.
• Available with cable or M8 integrated connector.
• Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit our web-site www.pizzato.com or ask for special documentation.
|
|
|
Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder. Magnetic-inductive permaprox sensors from TURCK operate on a patented function principle. Thus they are capable of reliably detecting permanent magnets of various field strengths on all common cylinder types. They operate completely wear-free and are short-circuit protected; a weld-field immune version for welding applications is also available.
|
|
Pneumatic cylinders are typically made of aluminum, so sensors can indicate end-of-stroke from outside the tube. A magnet installed internally on the piston during manufacturing allows an external magnetic field sensor to detect the motion of the piston. The magnetic sensor can be placed anywhere along the length of the cylinder to read end-of-stroke.
|
|
We offer the world's largest range of EMC Transient & Impulse test solutions for compliance or 1st article testing. Innovative transient/impulse test systems from a few 100 volts to over 100 kV, tailored specifically for your industry. Specialists in avionic, CE immunity, telecommunication, and component test equipment.
|
|
The ELT-400 is an innovative tester for evaluating magnetic radiation exposure in the workplace and in public spaces. The device was developed for use by health and safety officials in industry, by insurance companies and by service-industry users.
The ELT-400 handles almost all of the required measurements in the low to medium frequency range with accuracy and ease. The device is comparable to sound level meters, which are commonly used in the workplace to protect against excessive noise exposure.
Options
Use as an active probe with a three-channel analog output for analysis applications involving an oscilloscope or spectrum analyzer.
|
|
| ... products without technical information |
| |
Automatically remove and elevate ferrous materials such as chips, turnings and small parts. Conveyor mechanism is totally enclosed. Wide variety of configurations can be assembled from standard design sections.
Chip & Parts Conveyor - Standard Utility Model 68
Standard model for lightweight material.
Chip & Parts Conveyors - Low Profile Permanent Magnetic
Control lightweight ferrous materials.
Chip & Parts Conveyors - Model 6
6-1/4 in. (159mm) deep housing to transport small volumes of chips.
Chip & Parts Conveyors - Model 9
9-1/4 in. (235mm) depth for greater volumes.
Chip & Parts Conveyors - Model 12
12-1/4 inch (311mm) depth for high volumes of chips.
Chip & Parts Conveyors - Model 21
21-1/4 in. (540mm) working width for high volume conveying.
|
|
Bunting MagSlide® Magnetic Slide Chip and Parts Conveyors are built to handle the tough jobs. Dirty, oily parts, jagged, abrasive scrap, and other punishing materials that could damage or jam conventional conveyors are no challenge for Bunting's 3-D CAD-designed, ruggedly constructed slide plate conveyors. They are ideal for use anywhere you need to transfer ferrous chips, turnings, and small parts from lathes, mills, or stamping presses or from slitting, forming, and other metalworking operations. Chain-driven, permanently charged high-energy Ceramic magnets inside the conveyor housing attract and move ferrous material along the conveyor's stainless steel faceplate. Optional water-tight housings can be submerged into almost any type of hot or cold liquid.
MagSlide Conveyors are engineered for trouble-free, virtually maintenance-free operation. There's no external belt to jam, tear, or wear out from carrying sharp, abrasive parts and scrap.
Get Outstanding Performance and Value
- Rugged construction
- Continuous chain lubrication with oil-impregnated UHMWPE SlideTrack™
- Oil ports to allow extended chain service
- High-energy Ceramic or Rare Earth Magnets matched to your application
- Durable stainless steel slider beds
- Sealed precision drive and take-up bearings
- Designed with 3-D solid-model technology
- Precision manufactured on CNC machines
- Optional submersible housings
|
|
MAGNETIC RAILS AND ROLLS
Goudsmit manufactures a wide selection of magnetic components with which magnetic transport systems can be built. The standard range of magnetic components is applied in many industries, among which the tin production industry for the transport of outer shells, covers, drums, aerosols, crown caps and screw caps.
|
|
| ... products without technical information |
| |
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
|
