|
|
Merit ME110
Battery powered digital readout with the following fixing ways :
1) panel mountable by relevant brackets
2) surface mountable by metallic supports
Flexible cable max lenght 2 meters.
Magnetic reader head with small dimension.
Fixing by M3 or M4 screws.
Wide aligning tolerances.
To be used with magnetic tape Givi MP200.
Resolution (programmable): 1 - 0,1 - 0,05 - 0,01 mm
0,01 - 0,001 - 1/16 - 1/32 - 1/64 inch
1° - 0,1° - 0,01° - 0,001° angolare
Accuracy: ± 30 µm
Repeatibility: ± 1/2 digit
|
|
Linear Position Sensing:
Comprehensive systems expertise: technological variety for the right sensor type for your drive control, machine monitoring or sensing moving processes in robotics, automation, packaging technology or the process industry.
Benefits:
- Mature technology
- Continuous innovation
- Maximum customer orientation
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Based on the high-precision evaluation of several coil systems, the new position measurement systems are a combination of proven inductive sensor technology and innovative microcontroller technology. Due to the simultaneous evaluation of multiple coil systems, these positioning systems provide very high repeatability, accuracy and resolution. Because of their inductive principle of operation they do not need ferrites or magnets as counterparts. Like an inductive proximity switch, the target can be made of any metal. Integrated safety functions, which for instance display the removal of the target out of the detection range, ensure additional system safety. Due to integrated temperature compensation, the inductive positioning systems are also well suited for harsh environments and critical positioning tasks.
Advantages:
High resolution and accuracy
Very good repeatability
Minimum temperature drift
Non-contact detection
Absolute
Teachable
|
|
|
The digital magnetic scale ® consits of a band-shaped magnetic and a reading head with the from Sony® developed MR-Element, which even by little changes of the magnetic flux a stron and stable output signal is generated. The output signal of the reading head, is electronicay divided and converted into a digital signal. This has a much higher resolution as the pole divider of the magnetised, magnetic alternating field and therefore it can be used to measure and control.
|
|
|
Length measuring technology is used today in the most varying fields. The LINEAR length measuring units are setting and measuring units for general use on the shop-floor. The well-known length measuring units ULM are the standard units for quality assurance in the field of calibration metrology. They are used for high-precision length measurements on precision parts. The motorized PLM- and CiM- series allow user-friendly operation, fast and reliable measurements with the smallest uncertainty possible. Typical application fields are precision products and inspection devices. Throughout the wide product range from the simple LINEAR length measuring units to the ULM units up to the ultra-precise and semi-automatic CiM universal measuring machine, Mahr always offers a practicable solution for the production, the measuring room and calibration labs. In other words: The highest precision in metrology with extremely efficient measuring processes.
|
|
- 7-digit LCD-display
- Sign and special characters
- Battery-status display
- Easy mounting
- Up to 3 external magentic sensors (switchable)
- Millimeter or inch operation possible
- Inch mode with fraction display
- Switch-over between incremental and absolute measuring
- Adjustable reference value
- Adjustable multiplication factor
|
|
|
|
|
|
Heavy duty measuring unit, dual measuring wheels for better stability and contact, frame/bulkhead mounted.
This rugged instrument has a wide range of applications where an accurate record of length is required. It is a strong, heavy duty unit for use on calenders, tenters, rolling, ribbon winding textile machinery and almost all other continuous manufacturing processes. The unit can incorporate any of the heavy duty mechanical revolution counters described in the totalising and predetermining sections of this site.
• Available with shaft encoder for driving electronic counters or computers.
• Sturdy die-cast construction.
• Uses standard measuring wheels.
• Can tilted out of the way when not in use.
• Supplied with stand as an option.
The 2300 bolts directly onto a bulkhead or frame member. The intregal hinge arrangement allows the unit to be positioned at any angle.
The measuring wheels supplied can be 0.5m or 0.3m (18in or 12in) circumference (specify when
ordering). The weight of the assembly holds it in contact with the material being measured.
|
|
LIMES Measuring system:
- Magnetic sensor is scanned along a magnetic band
- Not affected by dust, shavings, humidity
- Resolution up to 0.005 mm
- Simple mounting
- Measuring length up to 90 m
Draw wire encoder:
- Convert linear motion to rotary motion and
- simply measure with an encoder
- Measurement length up to 40000 mm
- Output signal as incremental or absolute encoder or potentiometer 0 ... 10 V, 4 ... 20 mA
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
The magnetic measurement system includes a sensor an electronic converter and a magnetic tape. The sensor head detects the position as it is moved over the magnetic tape.
Magnetic rings are also available for rotary motion as alternative to linear magnetic tape. Different shapes, dimensions and custom-made versions are available.
The magnetic rings can be completely integrated on customer machine; they are available for diameter up to 500 mm and they can be mounted with any Lika sensor.
The measuring system is non-contacting and therefore wear-free.
Application areas are woodworking machines and sheet metal machines.
Some features are:
- IP67 protection level
- Reduced dimensions
- Resolution up to 1 mm
Low application cost is one of the system’s advantages. Moreover the system is protected against contamination and works even with strong vibrations, or in humid or dirty environment.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. The challenges faced by measuring devices in extreme industrial conditions make great demands on their reliability and reproducibility. MagLine systems are mainly used for extremely precise tracking of linear and radial positions as well as speeds and angles. The contactless technology demonstrates its advantages in all kinds of applications, such as motor feedback or highly dynamic processes in particularly dirty environments.
Benefits:
- No-wear technology
- Insensitive to dust, chips, humidity, oil, fats, etc.
- Highly resitant to schock and vibrations
- Easy handling and mounting
|
|
Four models/cross sections
- 0.1, 0.2, 0.5, 1, 2, 2.5, 5, or 10 µm
(4 µin to 0.0004") resolution with
internal electronics
- RS-422 differential line driver output
- Three accuracy grades
|
|
|
Due to its solid design and easy use, the MOVOTELIT is suitable for laboratory and workshops. Its main application consists in measuring and checking slip gauges, plug gauges, balls, rolls, needles and any other flat or cylindrical high precision parts. It can be used as reference in a quality insurance system.
|
|
|
|
|
|
LASERSPEED 9000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
A Bragg cell is built in the optical system to allow for measurement of speeds from 0m/min, et to detect the direction of travel of the product without the need for external information.
LaserSpeed is able to measure length & speed on dis-/continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs: analog, RS232, 2x pulses as standard, Ethernet
Benefits:
1- Measures from 0m/min, ideal for applications where the speed profile is variable with frequent stops or reverse speeds,
2- high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
3- no moving parts: no wear or drift to the accuracy
4- independent to product size and no markings
|
|
|
|
|
|
LASERSPEED 4000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
LaserSpeed is able to measure length & speed on continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0.4 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs:analog, RS232, 2x pulses as standard
Benefits:
1- non-contact Laser Doppler technology ensures high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
2- no moving parts: no wear or drift to the accuracy
3- independent to product size and no markings
|
|
The wish of operators and technologists in the wood-based panel industry to scan the raw density profile online during the running production has been regarded as impractical for many years.
By means of the GreCon Inline Raw Density Profile Measuring System StenOgraph, it is possible for the first time to scan the raw density profile, as one of the most important criteria of the quality of particle board and fibreboard, online after continuous presses.
This enables the operator to influence the raw density profile and thus the features of MDF and particle board during the production process.
Shorter running-in times of new production plants and during product changes as well as an optimised production process lead to substantial savings in cost and material while the panel quality is improved.
|
|
Portable Density Meter: DMA 35
The DMA 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user friendliness. Its robust and lightweight design enables the use in numerous fields of application and its on-site operation in a wide range of work environments. This basic model enables the manual selection of measuring methods and sample IDs as well as wireless data exchange with a printer or PC. Therefore DMA 35 is an economic solution for general industrial and laboratory applications with constant or only occasionally changing measurement settings.
|
|
Concentration, Water Content and Dry Substance measured by microwaves
Your Advantages:
High selective sensitivity to water
High accuracy and long-term stability
even for difficult products
Simple installation, insertion directly
on the existing pipelines, vessels, chutes etc.
Simple start-up, system supported sample taking,
automatic calibration and graphic display
Accurate and reliable measurement
due to two highly stable PLL-synthesizers
and multi-frequency technology
Durable sensor measuring cells with wear resistant
smooth walled PTFE lining
Contactless measuring cell without installed
measuring antenna
High operational safety and standards of quality
|
|
|
|
|
|
PROCESS LOW FLOW RATE LIQUID IN-LINE DENSITY METERS DC-30 SERIES
LEMIS process uses the proven vibrating element technology which is widely accepted as the most accurate of continuous density measurement. It is based on the frequency changing of the sensitive unit and resistance of the built-in temperature sensor in dependence of characteristics of measured liquid. The oscillation period of the sensitive unit mainly depends on density and temperature of measured liquid.
Continuous monitoring optimizes, controls and manages the processes. DC-30 series has a variety of applications, where low flow rate does not allow to install standard high flow systems. PC connection allows distance control for the most critical parameters in such processes as organic synthesis and chemical reactions in reactors.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
|
|
|
|
|
The compact, rugged Thermo Scientific SGD-O is the most reliable non-contacting density gauge for monitoring fluid density, including PPG, PPA and SGU, in the oilfield during fracturing and cementing. Capable of enduring high shock and vibration yet lightweight, this advanced device features rapid response and high accuracy to improve consistency, safety and overall performance. Engineered to withstand the extreme moisture and high humidity of oilfield environments, it rapidly indicates variations in slurry density and proppant concentration during fracturing and cementing operations. The SGD-O is comprised of three components: the source and detector work together to measure the fluid density while the remotely located electronic transmitter provides a clear digital display of the measurement. This advanced gauge measures through any pipe thickness, with the detector providing response in three to five seconds and accuracy of ±0.1 pounds per gallon. The transmitter can be mounted up to 100 feet away from the gauge to ensure worker safety. It can be powered by a readily available 12 or 24 volt power supply and features quick disconnect connectors for cable and transmitters. The SGD-O is also easy-to-install and use and has minimal maintenance requirements.
|
|
|
|
|
|
PORTABLE LIQUID IN-TANK DENSITY METERS DM-250 SERIES
Portable Submersible Density meter DM-250.1 and DM-250.2 are best suited for liquid density and temperature measurements directly in the storage or process tanks (up to 30 meters depth). No labor extensive and errors critical sampling required. Instead, the sensor of DM-250.1 and DM-250.2 are submersed at any required level and record spot density and real temperature at that point directly in the liquid. The operation personal can get in minutes the average density in the tank and its density / temperature / level profile, for example, at every meter. DM-250.3 is best for situation when DM-250.1 and DM-250.2 could not be installed. Just take a sample that is over a hundred mililitres of sample and the equipment will give you the results in seconds! Hundreds of measurements can be stored locally and future transferred to a PC or printer via built-in Bluetooth connectivity.
Density determination directly in the tanks is faster, easier, more precise and cost effective comparing with conventional technique requiring sampling and use of glass hydrometers by qualified personal. That is why the DM-250 series portable density meters from LEMIS process have found wide application, first of all in oil industry upstream and downstream operations where control of quality (density) and quantity (mass) of petroleum products at movement and storage is very critical.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as welding, bending and/or punching, performed by robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range.
|
|
Placed upstream of a cutting machine allows a single operator to measure and place a hose
without having to travel. Just set the display on the length and number of hoses to cut. Using
the push button, the operator will move the hose depending on the length programmed.
- Max Ø Capacity : 100 mm.
- Max lenght measured at pass : 99999 mm.
- Maxi number of pieces : 99
- Entry guidance.
- Working height adjustable to 800 at 1000 mm.
- Voltage : 230 volts 1 Ph.
|
|
Technical specifications
Tray diameter : 1500mm
The coil diameter varies according to the different models of hose crowns (from 220 to 700mm)
4 removable spindles to prevent crowns uncoiling
Enables the loading of hoses using a forklift truck or a hoist
|
|
|
|
see the results for the following category : 
