|
|
Construction out of anodic aluminum and stainless steel
Resistive conducting plastic track with noble metal cursor
Races of 10 mm to 1000 mm
Linearity 0,5%,0,25%, 0,1%
Various mechanical configurations: threaded rod, comes out from recall, kneecaps of fixing
Sealing IP 64
Temperature of use of -40°C with +105°C |
|
| The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications. |
|
| The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications. |
|
| Wilcoxon Research adds a displacement sensor to its popular PC420 Series of 4-20 mA vibration sensors. The PC420D is the first IEPE displacement transducer and 4-20 mA vibration transmitter packaged as a single sensor. The PC420D sensor outputs a 4-20 mA signal based on the displacement level of the machine vibration. The 4-20 mA output is determined by first measuring the peak to peak vibration, then converting that level to a 4-20 mA signal. Because balance components tend to dominate the vibration spectrum when viewed in displacement units, the PC420D sensor is able to track the balance component of machines, one of the most sought after parameters. Integrating this signal into an existing PLC, DCS or SCADA system simplifies real time health monitoring because vibration, formerly considered too complex, can now be trended in easily understood units of mils or millimeters of displacement. Measuring displacement can unmask hidden problems and provide data in easy to understand measurement units. Instead of converting to displacement after the measurement is taken, a common practice in diagnostic vibration monitoring systems which can introduce errors known as ski slopes, the PC420D sensor integrates at the measurement point for the cleanest vibration data. The PC420D is ideal for condition based monitoring and predictive maintenance of motors in the speed (frequency) range of 300 rpm to 60,000 rpm (5 Hz to 1,000 Hz). The PC420D can be widely used to monitor balance of plant instrumentation such as pump motors, blowers, fan motors, compressor motors, and a wide variety of machine tool drive motors to significantly reduce failure rates in the field. |
|
| The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications. |
|
OEM sensors in plastic housing for large quantities.
ASM Cable Actuated position sensors are made of a specially-manufactured and calibrated measuring cable and a highly accurate graduated drum. They are very easy to install and are ready for use in a very short time.
Technical advantages:
Low Cost
Compact outline
Plastic housing
Measuring ranges:
- WS31: 250 mm / 500 mm
- WS42: 750 mm / 1000 mm
Resolution essentially infinite
Mounting selectable between mounting brackets or spacer nuts with internal thread
Zero position adjustable ±45° |
|
Magnetostriction - A Milestone in Measurement Technology
The heart of MTS sensors is the ferromagnetic measuring element, also known as the waveguide, and a movable position magnet that generates a
direct-axis magnetic field in the waveguide. When a current or interrogation pulse passes through the waveguide, a second magnetic field is created radially around the waveguide. The interaction between the magnetic field in the waveguide and the magnetic field produced by the position magnet generates a strain pulse which travels at a constant ultrasonic speed from its point of generation, the measurement point, to the end of the waveguide where it is transformed into an electric pulse in the sensor element. The resulting signal is processed by the specialized electronics of the Temposonics sensor. With our extensive know-how of ferromagnetic materials, magnetic effects and ultrasonic processes, MTS remains unrivalled in performance standards for non-contacting position measurement of the highest precision. |
|
Magnetostriction - A Milestone in Measurement Technology
The heart of MTS sensors is the ferromagnetic measuring element, also known as the waveguide, and a movable position magnet that generates a
direct-axis magnetic field in the waveguide. When a current or interrogation pulse passes through the waveguide, a second magnetic field is created radially around the waveguide. The interaction between the magnetic field in the waveguide and the magnetic field produced by the position magnet generates a strain pulse which travels at a constant ultrasonic speed from its point of generation, the measurement point, to the end of the waveguide where it is transformed into an electric pulse in the sensor element. The resulting signal is processed by the specialized electronics of the Temposonics sensor. With our extensive know-how of ferromagnetic materials, magnetic effects and ultrasonic processes, MTS remains unrivalled in performance standards for non-contacting position measurement of the highest precision. |
|
High resolution, noncontact, capacitive sensors.
Available in compact, embedded systems or modular cabinets.
Ranges: 10µm to 10mm
Resolution: as low as 0.4nm |
|
Non-contact capacitive displacement sensors of the capaNCDT series measure distances, lengths, dimensions, or positions of any electrically-conducting targets (e.g. metals). A linearisation function is integrated for measurement against insulator materials.
A wide range of sensor and electronic unit options allows optimum solutions even for the most demanding measurement tasks. The product range includes custom design versions for specific customer requests as well as low-cost versions for OEM applications.
|
|
The confocal chromatic measurement system, optoNCDT 2401, consists of a controller and a sensor. A fiber optical cable, which can be of almost any length, connects the two components. This system has no moving components and is therefore wear free. It can also be used in ATEX / EX environments. The system consists of a LED based controller a fiber optical cable and one of the sensor heads of the series 2400/2401 or the world first miniature sensors series 2402. This unique measuring principle enables displacements and distances to be measured with high precision and extreme
spatial resolution. Both diffuse and specular surfaces can be measured. With
transparentmaterials a one-sided thickness measurement can be accomplished along with the distancemeasurement. Since the emitter and receiver are arranged in one axis, shadowing is avoided. In contrast to conventional triangulation sensors the optoNCDT 2401 system is able to measure in narrow apertures, small gaps and cavities. The series optoNCDT 2402 is also with radial beam deflection for bore hole inspection available. |
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000
|
|
Magtrol's line of Displacement Transducers provide contactless measurement of absolute piston position in hydraulic and pneumatic cylinders and other applications. Their robust construction, large insensitivity to shocks and very long life (due to no moving parts and therefore no wear of components) make them both cost effective and very reliable. Magtrol transducers offer a wide range of operational temperatures and admissible pressure resistance for even the most demanding applications.
The transducer provides a direct 4-20 mA output signal corresponding to the measuring range, as well as VDC temperature output. As an option Magtrol offers the CST 113 Signal Converter, which allows the complete chain to be calibrated according to the specific needs, either in current or voltage output. |
|
WS position sensors capture position measurement either absolutely or incrementally, using measuring cables made from stainless steel. Using different constructions, and with measuring lenghts of up to 60,000 mm, the ultra-simple, sturdy, space-saving designs make these sensors the ideal basic solution for many length and positional measuring tasks.
Technical advantages:
Fast and easy to assemble, only minimal linear guidance required, compact design, resistant to vibration and shock, high protection category to IP68, linearity of up to 0.01%, high measuring speed upt to 20 m/s, mearuting lenghts of up to 60,000 mm, many output types.
WS positions sensors ensure reliable operation in many sectors of automation, process engineering, industry and research, e.g. in handling systems, circular saws, printing presses, aircraft testing, automobile testing, elevator technology, conveyor belt technology, warehousing technology, local transportation vechicles, tunnel-boring machinery, wind power plants, rehabilitation technology, medical engineering, patient beds, etc. |
|
Stout, easy to install, highly protected against environmental agents: linear wire transducers are the ideal solution for those industrial applications which require high accuracy and measuring length up to 12 m.
ELAP proposes two types, with potentiometer (series HPS) or encoder (series HLS) output.
In both cases the transducer consists of a strong stainless steel wheel covered with nylon, ensuring strokes.
- Stout
- Easy to mount
- Measures from 200 mm to 12 m
- High protection degree |
|
- Voltage output, Current output or Potentiometer output
- High repeatability, Can be combined with incremental, absolute or fieldbus encoders
- High repeatability, Can be combined with incremental, absolute or fieldbus encoders |
|
Draw-wire displacement sensors measure linear movements using a highly flexible steel cable. The cable drum is attached to a sensor element which provides a proportional output signal. Measurements are performed with high accuracy and high dynamic response. The use of high quality components guarantees a long life cycle and high operational reliability. MICRO-EPSILON offers a wide selection of draw-wire displacement sensors with numerous types of output signal. This means that each customer has the opportunity of selecting the best sensor for his application. Choose between analog and digital outputs to optimize your individual measurement task. OEM-solutions for
customized integration possible. wireSENSORs are application friendly due
to the excellent measurement range to size ratio and the fact that they are easy to mount and use. The rugged sensor construction ensures reliable operation even under difficult ambient conditions. Measuring ranges between 50mm and 50m are available. |
|
| The DLS series of draw-wire linear position sensors are a cost effective way to measure linear displacements up to 5000mm in the most demanding industrial environments. |
|
| Measuring systems based on the "pull-out cable" principle offer advantages for their handling since uncomplicated fastening of the cable on the adjustment unit can be perfomed fast and at a reasonable price. The wire-actuated encoders of SIKO of solid design and especially durable and fail-safe owing to the cable types used. |
|
Features:
- Very robust construction for mechanical and industrial plant application
- For converting linear displacements of up to 60 m into a rotary movement
- For mounting onto an absolute or incremental encorder
- Easy to install and to use
- Protection grade IP 65 with exception of cable entry slot |
|
DIN Rail mounted electronics,
Aluminum encased electronics,
Edge-connector PCB electronics for OEM use.
Ranges: 0.5mm to 15mm |
|
DIN Rail mounted electronics,
Aluminum encased electronics,
Edge-connector PCB electronics for OEM use.
Ranges: 0.5mm to 15mm |
|
The electromagnetic sensors induSENSOR are based on the well-proven inductive principle. They are employed both in single and large-scale applications.
The measurement ranges of the displacement transducers extend from a few tenths of a millimeter to over 600 mm. The actual measurement acquisition takes place without contact and wear free.
|
|
| The non-contact displacement sensors in the optoNCDT series operate according to the triangulation principle. Different models are suitable depending on the requirement. From the low-cost model to the ultrafast precision sensor. Measuring ranges from 2 mm to 750 mm are available. The product group is distinguished by resolutions from 0.03 µm to 300 µm and linearity between 1 µm and 1200 µm. Sensors for special surfaces such as shiny metals round off the range. The many times proven function for real-time surface compensation of changing reflection characteristics, RTSC, provides maximum signal quality in the market. |
|
Description for pictured GEL 176 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 177 Absolute Linear Scale:
* Long service life due to the contactless and wearless measuring of position magnets
* Digital transmission is performed in Gray-Code, so that simple cabling is ensured and the transmission security rises
* For use in hydraulic cylinders, industrial automation lines or machine construction industry
Description for GEL 220 Incremental Linear Scale:
* 5-year-guarantee on production defects
* Robust system for harshest conditions
* Ideal for application in wood and metal manufacturing (plate shears, presses, cylinders)
* Ideal for application in food and chemical industry
* Anticorrosive and wear-resistant measuring system
* Dirt wipers on the encapsulated measuring system
* Simple mounting
* Maintenance-free
* Dew-point-proof
* The measuring rods may be shortened to any length
* Reference mark integrated (zero signal) |
|
High resolution, noncontact, capacitive sensors.
Available in compact, embedded systems or modular cabinets.
Ranges: 10µm to 10mm
Resolution: as low as 0.4nm |
|
Cable displacement sensors are based on an extremely simple operating principle, transforming the linear displacement of the cable into a rotary displacement by means of a drum connected to a return spring.
The sensor outputs a signal proportional to the cable displacement through a hybrid potentiometer or an encoder fixed to the drum shaft.
The signal is then an analogue signal (voltage or current) or a pulse signal. |
|
Designed to complement today's advanced data acquisition/control systems, Solartron's S-Series brings new levels of accuracy, reliability and flexibility to the sharp end of displacement measurement technology...
- Digital, AC, DC and 4-20mA options
- <0,2 % linearity FSO analogue option
- 19 mm diameter stainless steel body
- Rigid stainless steel carriers
- Improved stroke to body length ratio
- IP 67protection
- Wide range of accessories |
|
| The AF111 and AF145 ranges of high accuracy LVDT displacement transducers have been designed primarily for use in the ratiometric configuration (difference over sum), and have a very compact size, with stroke lengths from 5mm to 150mm. |
|
|
|
