|
|
DS Series precision dovetail slides are offered in three models:
DS Express slides are offered in standard basic (no hand feed) and hand feed catalog models in 4, 6, 8 10 and 12" slide widths and in a variety of standard models. As standard cataogue products, these slides usually ship in 2-3 weeks.
DS Select slides are available with saddle widths up to 16" and with custom base and saddle lengths up to 64". As a semi-custom configuration, these slides are offered with optional drive styles and accessories and usually ship in 3-4 weeks.
DS Super Select slides have everything you want in a custom slide. They are offered in saddle widths up to 16" and with base and saddle lengths up to 96". They are engineered around a standard building block design that allows for complete customization to meet custom requirements while offering the benefit of reduced lead time and lower cost provided by the standardized modular design.
TS Series Tooling and Utility Dovetail Slides are offered in 2, 3, 4 and 6" saddle widths. They are also offered in heavy-duty models (HTS) in 4, 6 and 8" widths and feature a thicker base, saddle and dovetail cross section for enhanced strength, stability and durability. TS and HTS Series feature cast iron construction, extended saddle for increased reach and adjustable straight gib for custom fit. TS slides are offered in four models:
Basic (manual positioning)
Hand Feed
Compound Hand Feed
Vertical Angle Plate with Hand Feed
Return Spring
M Series slides are offered in 2, 4, 6, 8 and 10" saddle widths. As standard, they feature manual hand feed and are offered as single axis, compound axis and vertical axis mounted configurations. As standard options, M-series slides can be configured with:
Manual Saddle locks
Crank Handle (Replacing Std. Positioning Hand Wheel)
Right Angle Hand Feed Gearbox
Way Wipers
Accordion Way Covers. |
|
Precision dovetail slides useful for indexing, fixturing, positioning, and gauging.
Choose from seven cross-sectional sizes. Available as a manual or a motor driven stages. Payload capacities from 5 to 300 pounds. Travel distances from 3 mm to 200 cm.
Choose single stages or combine units for multiaxis systems. Purchased directly from us the manufacturer.
Velmex UniSlide Assemblies are linear and rotary positioning equipment. Five base widths range from 1.5 to 9. Chose from 950 models in many styles from plain linear bearing to precision rapid advance with position readout to 0.001. |
|
HepcoMotion's SL2 Stainless Steel Based Slide System offers an extensive range of stainless steel professional slides and bearings specifications, together with specially treated aluminium components. Whether your application requires very high precision under wash room conditions with no lubrication, or excellent corrosion resistance in washdown and harsh environments, SL2 is the ideal linear choice, offering long service life virtually zero maintenance.
- Hardened and precision ground slideways for maximum reliability
- Quality stainless steel bearings with cap professional seals for long system life
- Aluminium components are coated to U.S. Dept of Agriculture approved standards
- Dirt Traps removed by plastic plugs in all counterbores
- Supplied as a complete assembly or in component form |
|
BTU Type
HALF FINISHED PRODUCT
CUSTOMIZED PRODUCT
Robust design:
- High-performance unit designed considering the strength.
All-in-one unit:
- Combined shift table, guide shaft and shaft holder in one unit.
- Excellent durability.
|
|
X RAIL, new linear bearing X RAIL in 2 versions: stainless steel or zinc plated steel.
X RAIL is a simple and cost effective linear suppliers of bearing for applications where good load capacity and corrosion resistance are most important.
X RAIL is available in two different versions:
X RAIL in stainless steel version (TEX rail, CEX slider)
X RAIL in zinc plated version (TES rail, CES slider)
Both versions are in three different sizes: 20, 30 and 45mm base.
X RAIL in stainless steel version - This series is a simple and cost effective linear bearing for applications where corrosion resistance is most important. Advantages:
- Corrosion resistant even after scratching, etching, and chipping
- Can be used in washdowns
- Resistant to high temperatures and temperature changes
- No coatings that could flake or chip
- Low coefficient of friction
- Ecological and recyclable materials
The contoured rail is made of AISI316L stainless steel and comes in lengths up to 3 meters (910). The raceways are internal for better protection and compactness.
The rails come with standard mounting holes with a hole pitch of 80 mm (3.15). |
|
| All components are made of stainless steel which gives superior corrosion and heat resistance. Also steel professional balls are caged by steel retainer, this industrial slide offers very smooth motion. The unit incorporates two row of steel balls in four point contact with the raceways so that the stable accuracy and high rigidity are obtained even under fluctuating and complex loads. Very suitable for fiber splicing and semi conductor equipment application. |
|
| IKO's [ML] contains a lubrication part inside the suppliers of bearing called C-Sleeve which is made of a porous resin tubular sleeve and has a great number of communicating holes that can hold a large amount of lubricant. Thus as you stroke this linear guide, oil will be gradually released from the bearing and you do not have to lubricate the system from time to time. Good for all kinds of application where it is hard to lubricate or requires clean environment. |
|
Offers a perfect solution for cage creeping probme by a built in rack + pinion mechanism with high accuracy.
Also you could use this product in vertical axis applications where you could not use the existing Crossed Roller Guies easily due to creeping when you stop the machines. Dimensions are compatible with commercially popular crossed roller guidance. Recommended applications are measurement machines, inspection machines and wafer processing machines.
|
|
Recirculating ball slide professional guides offer unlimited travel in a compact mechanism. Available in lengths up to 1000 mm.
Stainless steel and sealed units also available |
|
| Crossed rollers add 6-8 times greater capacity than ball professional slides. Can withstand loads in any direction. |
|
The V-Guide Components are available with various features, sizes and lengths, which make them the ideal solution for linear motion applications. V-Guides provide an excellent alternative for medium accuracy requirements. The V-Guide is an industry standard for linear motion.
* Simple mounting and alignment
* Available in Inch or Metric
* Fully Interchangeable with BWC
* High speed capabilities
* Handles outstanding in harsh environments
* Low noise
The V-Guide Solutions offer flexibility and reliability for a wide range of linear motion environments. The V-Guide design sweeps aside debris and the track is ideal for virtually unlimited stroke lengths.
* Mounting versatility
* Smooth operation
* High load capacity in all directions
* Easily adjustable
* Shielded or sealed rollers prevent contamination
* Self Cleaning
V-Guide Wheel Solutions
* V-Guide wheels can be used with internal or external
90-degree ways, or used with round shafts
* Available in four sizes
* 52100 Supplier of bearing Steel or 440 Stainless Steel Construction
* Permanently grease lubricated
* Available with 304 Stainless Steel shields, or nitrile rubber industrial seal
V-Guide Rail Solutions
* V-Guide Rails are available in four sizes, which are
designed for the corresponding size wheels
* The V-Ways are induction hardened and polished, while the
track body is left soft for easy drilling of mounting holes
* Available in 1045 Carbon Steel or 400 Stainless Steel
* Optional black oxide finish
* Choose predrilled rail from stock, or custom cut
and drilled to your specification |
|
X2 provides very stiff lifting columns for various applications in medical, ergonomical and industrial markets.
The columns are available with single spindle( S-type), double supplier of spindles for low retracted height (D-type) and industrial winch solution with extremely low retracted height (B-type, only pull force). All types are available in different versions for various offset load and extension needs.
We are very good in CUSTOMIZED columns to OEM users and end user with projects from 5 pieces.
|
|
Bespoke design of linear movement systems and sub-assemblies are a central part of the GSF service. GSF's production systems allow for the bespoke specification and production of slider and linear rail components - from choice of material for each component (ball track, industrial ball bearing, ball cage and end-stops, lubricating oils and greases) through to a large range of corrosion resistant and strengthening finishes and locking options.
In addition the company's highly experienced engineers are able to design and produce brackets, assemblies and systems to address most linear motion problems, working alongside and in partnership with your own engineers to achieve the best result for you. |
|
An extremely versatile high load linear system, HDS is available with 3 types of suppliers of bearing and a multitude of slide options, including integral housing and pinion drive.
All the options can be mounted to a lightweight yet very strong aluminium beam,which really simplifies incorporation into all applications.
- All professional slides or flat tracks in precision or commercial grade
- Rack cut slides and pinions for ease of driving
- Double edge slides for built-in parallelism
- Single edge slides for spacing apart
- Slide datums and keyways for quick and easy installations
- Versatile construction beam gives unlimited design options
- Positive lubrication and bearing protection for low maintenance |
|
Simple to specify, simple to order
Hepco Simple-Select offers four useful sizes of spacer slides supplied in 24 hours or less complete with carriages assembled ready for installation. All units are fitted with double row suppliers of bearings and cap professional seals to ensure a long and trouble-free life. Our general purpose spacer slide precision cold drawn and hardened on the Vee running surfaces provides good accuracy and long life, even in the most hostile environment. Specifying could not be easier. Check the load to be carried against the carriage load ratings and check that the physical size meets your requirements.
Select standard range of 4 popular sizes ready for dispatch in 24 hours or sooner
Utilizes proven Hepco Vee slide technology - Ideal for high speed / short stroke movements
Low installation time simply supplier of bolt slide down
Can be fitted to unmachined surfaces if required
System compliance - ideal for professional fitting to aluminum profiles
Accurate drawn slide allows smooth low friction movement
Double row bearings for long and trouble free life
Fitted cap seals prevent dirt ingress and ensure constant positive lubrication
Induction hardened Vee slide - low wear characteristics
Quiet in operation
|
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Professional press Dies and Plastic Mould. We delivery components europewide in averagely 6 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI Precisely what you need. |
|
From our Telerac high precision high load manufacturer of bearing range of caster bearing linear product, the 90.8000 is constructued from cold-drawn steel, hardened and ground to ensure track precision and low friction movement for the self-lubricating sliders.
The 90.8000 telescopic system is designed for high-tsch telescopic applications requiring precise motorized movement and a constant smooth gliding performance with no play.
The rollers come in a fixed and floating pair, resulting in a product that is self aligning, thereby reducing the pre-engineering required for mounting the units.
The 940mm length unit gives a load bearing capacity of 300 Kg (660 lbs) at full extension. |
|
A comprehensive range of linear ball industrial guides covering the more popular sizes and types interchangeable with the Industry standard. High quality, good accuracy with exceptional rigidity Linear Ball Guides from HepcoMotion are designed around a four row ball angular contact concept which provides a high load capacity in a compact space envelope, reduced differential slip together with good system compliance.
A stock range is available which will suit most automation requirements, however, a whole combination of preloads and grades can be supplied to suit individual applications.
- Built in felt wiper to aid lubrication
- Optional oil professional tank feature to increase maintenance intervals and to prolong system life
- Smooth recirculating system cuts down on noise
- Steel protective cover reduces debris traps
- Range of grades and preloads to suit all applications
- Integral all round block sealing for added protection
|
|
The simple yet extremely versatile design of the rails in this family is the characteristic that defines their success. Made from cold-drawn steel with internal, hardened raceways like most of ROLLONs products, these professional slides are made for repeated industrial use. With high load and moment capacities, EASY RAIL linear bearings are known for their high quality, affordability, ease of movement, and compactness.
|
|
| Profile Rail Guide systems provide precise linear movement together with high load carrying capacity, high stiffness and unlimited stroke. The range of carriages, rails and accessories are ideal for industrial applications. |
|
A comprehensive linear solution designed to serve the majority of automation applications, GV3 follows the lead set by the renowned Hepco Generation II and CM systems. The best features from these systems are incorporated into a huge range with many new sizes, types, precision grades and options. The result is that the optimum linear solution can be specified to suit both application and budget.
Twin, Double Row and Slimline Bearings manufacturers to suit your application needs
Flat Tracks and Track rollers for mounting compliance, saving costly alignment time
Flat and Spacer Slide professional profiles in single and double edge format for application flexibility
All Professional slides and Flat Tracks available in 3 grades of precision
Unground areas have an attractive black finish to inhibit corrosion
Removable Carriages eliminate 'run-off' areas giving more compact machines
Tamperproof Carriages are accurately set then locked in position - ideal for OEMs
Integrated rack drive and belt drive reduce design time
Mix and match between sizes, types and precisions gives the most suitable combination for every application
|
|
| The linear unit, consisting of a cylinder and a linear guide, is a compact, stable lift element. It can be directly installed onto or into existing objects. A multitude of tables or other components can be retrofitted with a lift system without problems. |
|
Reliable 3-Axis Motion available in a comprehensive product line. Choose from among four distinct product families and numerous options for exact specifications and performance your application requires.
Miniature 5/16" Bore to Rugged 4" Bore Cylinders, with professional guide industrial shafts from 1/4" to 1-1/2" and strokes to over 30".
A Selection of linear ball bearings, self-lubricating sleeve suppliers of bearings, guide shaft materials, hardening and plating options, makes it easy for you to specify a model tough enough for the most abusive environments.
Versatile Mounting Styles - through hole, tapped hole or side tapped mounts, professional foot mounts, front or rear flange mounts, special tool mounting professional bar configurations, and port location options. |
|
FDA / FEA
Standard
For medium loads with stroke speed of up to 10m/s. Light-weight aluminium components and compact dimensions.
- Aluminium body
- 8 rollers in needle bearings
- Plastic plate on both front sides with felt | | |
