|
|
TOC is used in a variety of applications from management of waste water treatment plant influent and effluent, to drinking water supply management and monitoring of impurities in process and natural waters. And the range of applications in which this type of on-line technology is used is expected to continue expanding.
In addition, because nitrogen is considered to be one of the factors which contributes to the over-proliferation of organisms in enclosed bodies of water, management of these public water sources and of treatment plant influent and effluent also includes demand for monitoring of nitrogen levels.
|
|
The instrument provides on-line monitoring of active chlorine or total free chlorine in drinking water plants, drinking water distribution networks, and in cooling water.
-Low detection limit for efficient residual chlorine monitoring
-Measuring range of 0 - 5 mg/L of HOCl or free chlorine
-Two analog outputs
-Automatic temperature compensation
|
|
The SOLA II (Sulfur OnLine Analysis) instrument measures total sulfur in liquid hydrocarbon fuel and gaseous process streams. The SOLA II addresses the need for a low maintenance sulfur analyzer that can reliably measure low ppm levels to help customers meet the tightening regulatory requirements limiting sulfur levels in fuels.
The SOLA II analyzer uses the low-maintenance Pulsed UV Fluorescence (PUVF) detector with the proven Pyrolysis system for measuring total sulfur in gasoline, diesel, kerosene, and jet fuel. The PyrolyzerTM performs the conversions for total sulfur measurement without requiring a source of pure oxygen. A field-proven valve injection system includes hardware and software for precise control of sample introduction.
Full scale measurement ranges are from 0 - 5 ppm/wt to 0 - 9000 ppm/wt detection limits as low as 0.25 ppm. Automatic stream switching is also available for dual-stream applications.
|
|
AQUAPOD LIGHT UV :
Using advanced ultraviolet (UV) absorption technology absorption technology, the AQUAPOD LIGHT UV analyzer offers a simplicity, accuracy and economy in nitrate analysis.
The Analyzer continuously measures the UV light absorbed by nitrates and eliminates the need for reagents and frequent calibrations.
The AQUAPOD LIGHT UV Analyzer is simple to operate and maintain.
The AQUAPOD LIGHT UV is the best solution where nitrate levels must be monitored (wastewater, lake and river monitoring, drinking water,...)
|
|
the AQUAPOD the AQUAPOD LIGHT detects and analyzes a broad range of parameter and pollution of drinking water, natural water, industrial wastes, sea water:
NITRATES
DBO
DCO
COT
MY
UV 254 NM
GENERAL ANOMALIES OF WATER
COLORIMETRY
HYDROCARBONS
URBAN REJECTIONS
COMPLEX INDUSTRIAL PRODUCTS
SPECIFIC PRODUCTS
The AQUAPOD LIGHT integrates an analysis UV as well as a detection of fluorescence (in option) making it possible to reach thresholds of seusibilities about the ppm (for the majority of the parameter to the µg/L (hydrocarbons)
Easy to install, without reagents nor calibration, the AQUAPOD Light 2000 ensures you a cost of very low exploitation.
The AQUAPOD LIGHT UV FLUO can accept any type of physico-chemical sensors Modbus RS485, 4 - 20 my...
Moreover, thanks to its exits Modbus, Profibus and Can Open, the AQUAPOD LIGHT can be interfaced quickly towards any system of supervision or communication GPRS or STN
|
|
# mmediately signal hardness breakthrough to activate regeneration
# Makes your water softening system more efficient and less costly
# Reliable, simple and accurate- with automated calibration
# Continuous monitoring in "real time"
|
|
Orion 2120XP Calcium Hardness Analyzer
The Thermo Scientific Orion 2120XP calcium hardness analyzer detects calcium as the major component of hardness in real time- providing accurate and reliable results that you can count on. Limiting the costly effects of improper water purification has never been easier.
|
|
|
|
|
|
Modular System
The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately.
Display Module-The sc1000 Display Module is a full-featured controller with a large color touch-screen display. The intuitive, easy to use interface can be used for any number of parameters. One Display Module controls either a single Probe Module or a number of Probe Modules connected by a digital network. The Display Module is fully portable and can be disconnected and moved anywhere within the network. The Display Module must be ordered separately from the Probe Module.
Probe Module-Each sc1000 Probe Module provides power to the system and can accept up to 8 digital sensors. Probe Modules can be networked together to accommodate many more sensors attached to the same network. Only one Display Module is needed for a networked system. The Display Module must be ordered separately from the Probe Module.
Digital Network-Connect up to 32 participants in an sc1000 network. Network together mulitple Probe Modules to meet almost any application's needs. Participants are defined as anything attached to the network including probes and optional cards but not counting the Display Module or Probe Modules.
|
|
The transmitter is also available to use in combination with the Turbidity Checker / SS Checker.
As well as the turbidity/SS indication, this transmitter can indicate signal output response time, alarm level setting and so on.
You can control the turbidity/SS utilizing its functions fully.
|
|
CHLORINE RESIDUAL ANALYZER
The CRA 3500 Chlorine Residual Analyzer is the first polarographic CRA to offer automatic calibration. Cleverly engineered and using state of the art electronics the CRA 3500 is able to save customers considerable sums of money by auto- calibrating at user defined time intervals.
BENEFITS
- Automatic Calibration
- Low Purchase Cost
- Low Cost of Ownership
- Reduced pH Dependency
- SMS Text Alarms
- Webserver*
- Bluetooth
- 4-20mA and Relay Outputs
- Carbon Dioxide or Acid Buffer if Required
- Can Operate for Three Months without Operator Intervention
|
|
General description:
Free residual chlorine analyzer type M 1032 C is designed for measurement and control in drinking water, waste water treatment and swimming-pools applications.
The unit consists of two electrodes (gold and copper - measurement electrodes) measurement cell with mechanical cleaning and microprocessor controlled unit with graphic display. With clear measured signal control unit evaluates and amplifies cell current and with an automatic temperature compensation we have an accurate measured signal on the output and on the graphical display shown in mg/l.
Control unit is equipped with galvanically separated 4-20 mA signal on the amplifier output.
User can easily communicate with control unit over graphic display and four keys.
|
|
Measuring and control instrument for free chlorine
- Easy and safe operation by plain text menu guidance
- Safety by password function
description
The K 100 (W) CL2 is a sophisticated single-channel instrument for measuring and control free chlorine. Additionaly temperature measurement of the measuring media is possible. The instrument is available in a panel mounted housing (K100 CL2) and in a wall mounted housing (K 100 W CL2).
|
|
* 0 to 5 mg/L range, dual, fully-adjustable set-point alarms
* IP62 enclosure rating, suitable for indoor installation
* Automatic, self-testing diagnostics
* Minimal routine maintenance required
* Colorimetric DPD chemistry - fast, reliable, economical
* Unattended operation up to 30 days
* Manual or automatic feed pump control
|
|
|
|
|
|
Sievers 500 RL On-Line
GE Analytical Instruments’ new Sievers 500 RL On-Line TOC Analyzer delivers the accuracy, automation, and confidence needed to transition from laboratory to on-line TOC for enhanced operating efficiencies and science-based risk management. Using the proven Sievers laboratory TOC measurement technology, the Sievers 500 RL provides continuous quality assurance for on-line pharmaceutical water release, cleaning validation, and Process Analytical Technology (PAT) quality initiatives.
The Sievers 500 RL On-Line TOC Analyzer uses no reagents and features the revolutionary four-port Super iOS standards introduction device that fully automates system protocols, and transfers critical standards information directly to the Analyzer for secure data management, significantly reducing costs and risks.
The 500 RL Analyzer shares many productivity and ease-of-use features of other Sievers TOC Analyzers, including 12-month calibration stability, a color touch-screen display, USB port, and minimal maintenance (a few hours per year). With a wide operating range of 0.03 ppb to 2,500 ppb, the 500 RL also measures USP conductivity.
|
|
BioTector - TOC ONLINE ANALYZER
TOC, COD, BOD, TC, TIC, VOC - The oxidation process that totally self-cleans
PRODUCT OVERVIEW
• Self-cleaning technology
• Uptime - Typically 99.7%
• Results < 6.5 minutes
• Multi-range
• Single and multi-stream option
• Nitrate & phosphate analysis modules available
General Information
Designed to withstand corrosive environments, the BioTector TOC Analyzer is housed in an FRP enclosure with dual compartments to keep all electronic components separate from the “wet” or analysis section. The BioTector TOC Analyzer has an in-built microcontroller and is operated through a membrane keypad. An SD Falsh Card allows easy software & configuration updates and may be used to download the 5,000 event archive.
|
|
The PowerMon Titrometer is a versatile applicable on-line measuring instrument. It guarantees a permanent optimal water quality by the continuous supervision in the chemical industry, water and waste water treatment, in power stations and the paper industry.
Advantages
- fully automatic operation
- easy, comfortable operation
- fast data transfer
- precise results
- self-monitoring system
- minimum operating cost by small reagent consumption
- connection of up to 100 external, physical measuring sensors
- remote maintenance and network ability
- update of the operating software or download of data by USB stick
- graphic user interface with interactive Touch Screen operation
- second measuring point without surcharge
- operation also possible without housing
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
