|
|
|
THORNTON Total Organic Carbon instrumentation provides fast, continuous measurement of ppb-level organic contamination using proven UV oxidation and conductivity measurement technology. It meets pharmaceutical USP , and EP 2.2.44 as well as semiconductor ultrapure water monitoring requirements.
|
|
|
”On-site” means measuring Ammonium and Phosphate in the tank. The main advantage is that short sample paths give quick, undistorted results. This is the idea behind the new digital analyser generation from HACH LANGE—AMTAX sc and PHOSPHAX sc. The concept is a practical, logical extension of the proven AMTAX and PHOSPHAX series. It combines all the advantages: the high precision of an analyser and the simplicity of a probe.
|
|
AQUAPOD LIGHT UV :
Using advanced ultraviolet (UV) absorption technology absorption technology, the AQUAPOD LIGHT UV analyzer offers a simplicity, accuracy and economy in nitrate analysis.
The Analyzer continuously measures the UV light absorbed by nitrates and eliminates the need for reagents and frequent calibrations.
The AQUAPOD LIGHT UV Analyzer is simple to operate and maintain.
The AQUAPOD LIGHT UV is the best solution where nitrate levels must be monitored (wastewater, lake and river monitoring, drinking water,...)
|
|
|
|
|
|
The AQUAPOD LIGHT UV FLUO detects BTEX, gasoline, diesel, jet fuel and oil in water.
The AQUAPOD LIGHT UV FLUO is an on-line continuous monitor that provides hydrocarbon and oil in water monitoring down to low ppb.
The AQUAPOD LIGHT UV FLUO is used for applications that require monitoring of treated and untreated wastewater streams ranging from industrial wastewater, groundwater, process water, produced, potable water intakes, and storm water run-off.
Technical Features :
The AQUAPOD UV FLUO integrate both UV and Fluorescence analysis.
Direct, Continuous Monitoring. The AQUAPOD LIGHT UV FLUO monitors a flowing water stream continuously.
Accurate. The AQUAPOD LIGHT UV FLUO directly measures aromatic hydrocarbons in water with accuracies that consistently correlate to regulated laboratory methods.
Sensitive. The AQUAPOD LIGHT UV FLUO monitor detects BTEX, gasoline, diesel, jet fuel, crude oil, aromatic solvents and refined petroleum products containing aromatics from low ppb (ug/L) to high ppm (mg/L).
Selective. The AQUAPOD LIGHT UV FLUO continuously measures the fluorescence of aromatic hydrocarbon compounds in water. Fluorescent compounds each have a unique signature, and these compounds can be displayed as an actual concentration.
Effective Monitoring in Dirty Water. Monitoring fluorescence makes the AQUAPOD LIGHT UV FLUO resistant to interferences by turbid or dirty water which impact on-line UV or IR light scatter instruments.
Operator Friendly. The AQUAPOD LIGHT UV FLUO is designed for easy operation.
|
|
|
|
|
|
Analyzer/station of alarm AQUAPOD SPE
The analyzer/station of alarm AQUAPOD SPE detects and analyzes on line the micropollutions of water.
Thanks to patented technology SPE Box and analysis UV (+ Fluoresence in option) AQUAPOD SPE allows levels of detection lower than the µg/L (ex: 0,06 µg/L in the case of pesticides).
Its just evolutionary database:
- the pesticides (Triazines, derived Diuron, Isoproturon, organophosphates, pyrethrinoid, Ethyl parathion, amides...)
- hydrocarbons (SP 95, SP98, Kerozene, gas oil, oils,...)
- industrial products (Phenols: Chlorophenols, Nitrophenols...)
- complex mixtures (rejections of STEP, liquid manures...)
Aquapod SPE detects also any anomaly of spectrum UV of the eaaux one. Associated with an integrated automatic sampler, it makes it possible to identify new sources of pollution or évévenement
Applications:
- Drinking water: Collectings - Raw waters - treated Water
- Natural Water: Rivers - underground - stoppings
- Cleansing: Rejections of purification plants
- Industry: Water of process
|
|
the AQUAPOD the AQUAPOD LIGHT detects and analyzes a broad range of parameters and pollution in drinking water, water natural, industrial wastes and sea water:
NITRATES
DBO
DCO
COT
MY
UV 254 NM
GENERAL ANOMALIES OF WATER
COLORIMETRY
HYDROCARBONS
URBAN REJECTIONS
COMPLEX INDUSTRIAL PRODUCTS
SPECIFIC PRODUCTS
The AQUAPOD LIGHT integrates an analysis UV and fluorescence (in option) making it possible to reach thresholds of sensitivities about the ppm and Pb
Easy to install, without reagents nor calibration, the AQUAPOD Light ensures you a cost of very low exploitation.
The AQUAPOD LIGHT can accept any type of physico-chemical sensors Modbus RS485, 4 - 20 my...
Moreover, thanks to its exits Modbus, Profibus and Can Open, the AQUAPOD LIGHT can be interfaced quickly towards any system of supervision or communication GPRS or STN
|
|
the AQUAPOD the AQUAPOD LIGHT detects and analyzes a broad range of parameter and pollution of drinking water, natural water, industrial wastes, sea water:
NITRATES
DBO
DCO
COT
MY
UV 254 NM
GENERAL ANOMALIES OF WATER
COLORIMETRY
HYDROCARBONS
URBAN REJECTIONS
COMPLEX INDUSTRIAL PRODUCTS
SPECIFIC PRODUCTS
The AQUAPOD LIGHT integrates an analysis UV as well as a detection of fluorescence (in option) making it possible to reach thresholds of seusibilities about the ppm (for the majority of the parameter to the µg/L (hydrocarbons)
Easy to install, without reagents nor calibration, the AQUAPOD Light 2000 ensures you a cost of very low exploitation.
The AQUAPOD LIGHT UV FLUO can accept any type of physico-chemical sensors Modbus RS485, 4 - 20 my...
Moreover, thanks to its exits Modbus, Profibus and Can Open, the AQUAPOD LIGHT can be interfaced quickly towards any system of supervision or communication GPRS or STN
|
|
|
The AminoTac™ is a next-generation amino acid analyzer. The AminoTac™ attains higher analysis sensitivity of ninhydrin colorimetry, which provides high stability, while featuring a multi-segment tandem column, which provides quick analysis and longer column life. Windows™ based software makes the AminoTac™ easy–to-use and its modular design makes for compact storage and maintenance.
|
|
Double-channel measuring and control instrument for free chlorine and pH-Value - additionaly ORP optional
- Double measurement of free chlorine and pH -optionally with additional ORP measurement
- Easy and safe operation by plain text menu guidance
- Log book function
- Graphical trend display of the last 3 h
description
The dialog W 2 CL2 PR R is a sophisticated instrument for the precise measurement and control of the chlorine concentration and the pH-value - additionally an ORP measurement is optional. It is available in a wall mounted housing.
|
|
The PCA 330 series of analyzers check pH/ORP and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing overdosage.
Features:
• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC
|
|
# mmediately signal hardness breakthrough to activate regeneration
# Makes your water softening system more efficient and less costly
# Reliable, simple and accurate- with automated calibration
# Continuous monitoring in "real time"
|
|
Orion 2120XP Calcium Hardness Analyzer
The Thermo Scientific Orion 2120XP calcium hardness analyzer detects calcium as the major component of hardness in real time- providing accurate and reliable results that you can count on. Limiting the costly effects of improper water purification has never been easier.
|
|
|
|
|
|
Modular System
The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately.
Display Module-The sc1000 Display Module is a full-featured controller with a large color touch-screen display. The intuitive, easy to use interface can be used for any number of parameters. One Display Module controls either a single Probe Module or a number of Probe Modules connected by a digital network. The Display Module is fully portable and can be disconnected and moved anywhere within the network. The Display Module must be ordered separately from the Probe Module.
Probe Module-Each sc1000 Probe Module provides power to the system and can accept up to 8 digital sensors. Probe Modules can be networked together to accommodate many more sensors attached to the same network. Only one Display Module is needed for a networked system. The Display Module must be ordered separately from the Probe Module.
Digital Network-Connect up to 32 participants in an sc1000 network. Network together mulitple Probe Modules to meet almost any application's needs. Participants are defined as anything attached to the network including probes and optional cards but not counting the Display Module or Probe Modules.
|
|
The transmitter is also available to use in combination with the Turbidity Checker / SS Checker.
As well as the turbidity/SS indication, this transmitter can indicate signal output response time, alarm level setting and so on.
You can control the turbidity/SS utilizing its functions fully.
|
|
The PowerMon Ionometer is a versatile applicable on-line measuring instrument, which is used for the monitoring of the legally prescribed limit value in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
The Monitor 90 Ecometers are used to measure gaseous inorganic chorine, fluorine or ammonium compounds.
They are ideal for process monitoring and emission control, and comply
to the requirements of the German emission control regulations
(BImSchV) - among the strictest in the world. The high system availability makes the Ecometer an ideal component of automatic control systems for emission control installations.
Advantages:
-Minimal reagent consumption
for low operating costs
-Low maintenance, with selfchecking and automatic recalibration
-Automatic correction for
sample pressure and temperature
-Low sensitivity to interference,
below statutory requirements
-High stability, with low standard deviation and drift
-Industry standard interfaces and outputs
|
|
These analyzers and sensor assemblies are suitable for measuring fluoride concentration typically found in drinking water applications and are a simple, cost-effective solution for ensuring regulatory compliance in fluoridated drinking water.
Benefits:
- Low price
- Low maintenance
- No chemical additions
|
|
ANTEK's 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.
Features & Benefits
- Specific for fluoride
- Sensitivity from sub-ppm to % levels
- Results in 5 to 15 minutes
- Non-hazardous operation
- Gas, LPG, liquid, and solid samples
|
|
The PowerMon Titrometer is a versatile applicable on-line measuring instrument. It guarantees a permanent optimal water quality by the continuous supervision in the chemical industry, water and waste water treatment, in power stations and the paper industry.
Advantages
- fully automatic operation
- easy, comfortable operation
- fast data transfer
- precise results
- self-monitoring system
- minimum operating cost by small reagent consumption
- connection of up to 100 external, physical measuring sensors
- remote maintenance and network ability
- update of the operating software or download of data by USB stick
- graphic user interface with interactive Touch Screen operation
- second measuring point without surcharge
- operation also possible without housing
|
|
|
|
|
|
Sievers 900 Laboratory
The Sievers® 900 Laboratory Total Organic Carbon (TOC) Analyzer offers superior productivity for laboratory TOC measurements. Automated calibration and validation procedures, faster analysis time, automated reagent adjustment, and the high-capacity 900 Autosampler combine for an unequalled level of efficiency, flexibility, and ease of use.
The 900 Laboratory Analyzer yields productivity gains with analysis times 30 percent faster than its Model 800 predecessor. The instrument enables complete unattended operation with an Autoreagent feature that calculates and applies the appropriate reagent flow rate for any sample without requiring user intervention. Additional productivity enhancements are realized with the optional 900 Autosampler, featuring random access capability and up to 120 sample positions.
Engineered for ease of use and cost-effective operation, the Analyzer needs no external reagents or gas supplies and requires only two hours of preventive maintenance per year. Twelve-month calibration stability frees analysts to perform other critical tasks.
|
|
Analyzer - UDA2182 Multiple Input
The UDA2182 Universal Dual Analyzer represents the latest in analyzer technology by providing the most versatile multiple-input analyzer package on the market for measurement of pH, ORP, conductivity and dissolved oxygen.
|
|
We describe the use of measuring and control technologies for fluid dosing as “intelligent dosing”. Using the right measuring and control technology can help to substantially optimize metering of fluid chemicals.
The use of the right measuring and control technology grants a list of advantages for the dosing of fluid chemicals:
* Increased process safety
* More efficient process guidance (e.g. increase in product quality)
* Cost-savings for dosing-chemicals
* Cost-savings for the disposal of dosing-chemical-surpluses (effluent costs!)
* Transparency of the measuring data in realtime
Our product families for measuring and control technology offer a complete product range ideally adjusted to your dosing tasks
|
|
|
One cost-effective and convenient way to measure multiple parameters without the need to purchase many different meters is to make use of a multi-parameter meter. Most of these meters are able to measure 2 or more parameters. The models featured here measure pH, conductivity and dissolved oxygen.
|
|
|
|
|
|
The HI 9828 Multiparameter Portable Meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure, and temperature. Some of the most advanced capabilities available are incorporated into this portable meter. Designed for intuitive operation, the menu-driven navigation is user-friendly and logical.
Engineered with smart features such as auto recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings, and measurement check - to eliminate erroneous readings - and more, our design acually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities. For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality. For monitoring and recording data, HI 9828 can be equipped with Hanna's optional T.I.S. - Tag Identification System: iButton©s with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The LOGGER function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
|
|
The Analyst provides far greater accuracy and convenience for water testing. Using the latest advances in microprocessor technology, The Analyst provides a direct-reading, user-friendly analysis system for your choice of 90+ water tests. Most test kits use convenient tablet reagents. Compact, rugged and portable, The Analyst is equally reliable in lab, plant, classroom or field.
Important Features
Choose from OVER 90 pre-standardized important tests
Permanent calibrations for 90+ tests are stored in the memory of The Analyst microprocessor. No standard solutions, calibrations, charts, graphs, or calculations are needed. Procedures manual (supplied) contains all 90+ test instructions. Just read the accurate result directly from the liquid crystal display.
For more information, please visite our website
|
|
Since 1957, the Myron L Company has designed and manufactured highly reliable analytical instruments for a wide variety of applications. Thousands of professionals around the world rely every day on the performance of our instruments. Demanding uses range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines.
We are proud of the trust our handheld instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of three, four or even six instruments.
|
|
The PowerMon Kolorimeter is a versatile applicable on-line measuring
instrument. It guarantees a permanent optimal water quality by the
continuous supervision of the legally prescribed limit value for total phosphate and ortho-phosphate in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
-physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small reagent consumption
-second measuring point without surcharge
-operation also possible without housing
|
|
CHLORINE RESIDUAL ANALYZER
The CRA 3500 Chlorine Residual Analyzer is the first polarographic CRA to offer automatic calibration. Cleverly engineered and using state of the art electronics the CRA 3500 is able to save customers considerable sums of money by auto- calibrating at user defined time intervals.
BENEFITS
- Automatic Calibration
- Low Purchase Cost
- Low Cost of Ownership
- Reduced pH Dependency
- SMS Text Alarms
- Webserver*
- Bluetooth
- 4-20mA and Relay Outputs
- Carbon Dioxide or Acid Buffer if Required
- Can Operate for Three Months without Operator Intervention
|
|
General description:
Free residual chlorine analyzer type M 1032 C is designed for measurement and control in drinking water, waste water treatment and swimming-pools applications.
The unit consists of two electrodes (gold and copper - measurement electrodes) measurement cell with mechanical cleaning and microprocessor controlled unit with graphic display. With clear measured signal control unit evaluates and amplifies cell current and with an automatic temperature compensation we have an accurate measured signal on the output and on the graphical display shown in mg/l.
Control unit is equipped with galvanically separated 4-20 mA signal on the amplifier output.
User can easily communicate with control unit over graphic display and four keys.
|
|
Measuring and control instrument for free chlorine
- Easy and safe operation by plain text menu guidance
- Safety by password function
description
The K 100 (W) CL2 is a sophisticated single-channel instrument for measuring and control free chlorine. Additionaly temperature measurement of the measuring media is possible. The instrument is available in a panel mounted housing (K100 CL2) and in a wall mounted housing (K 100 W CL2).
|
|
|
|
