|
|
* 0 to 5 mg/L range, dual, fully-adjustable set-point alarms
* IP62 enclosure rating, suitable for indoor installation
* Automatic, self-testing diagnostics
* Minimal routine maintenance required
* Colorimetric DPD chemistry - fast, reliable, economical
* Unattended operation up to 30 days
* Manual or automatic feed pump control
|
|
|
|
|
|
Sievers 500 RL On-Line
GE Analytical Instruments’ new Sievers 500 RL On-Line TOC Analyzer delivers the accuracy, automation, and confidence needed to transition from laboratory to on-line TOC for enhanced operating efficiencies and science-based risk management. Using the proven Sievers laboratory TOC measurement technology, the Sievers 500 RL provides continuous quality assurance for on-line pharmaceutical water release, cleaning validation, and Process Analytical Technology (PAT) quality initiatives.
The Sievers 500 RL On-Line TOC Analyzer uses no reagents and features the revolutionary four-port Super iOS standards introduction device that fully automates system protocols, and transfers critical standards information directly to the Analyzer for secure data management, significantly reducing costs and risks.
The 500 RL Analyzer shares many productivity and ease-of-use features of other Sievers TOC Analyzers, including 12-month calibration stability, a color touch-screen display, USB port, and minimal maintenance (a few hours per year). With a wide operating range of 0.03 ppb to 2,500 ppb, the 500 RL also measures USP conductivity.
|
|
BioTector - TOC ONLINE ANALYZER
TOC, COD, BOD, TC, TIC, VOC - The oxidation process that totally self-cleans
PRODUCT OVERVIEW
• Self-cleaning technology
• Uptime - Typically 99.7%
• Results < 6.5 minutes
• Multi-range
• Single and multi-stream option
• Nitrate & phosphate analysis modules available
General Information
Designed to withstand corrosive environments, the BioTector TOC Analyzer is housed in an FRP enclosure with dual compartments to keep all electronic components separate from the “wet” or analysis section. The BioTector TOC Analyzer has an in-built microcontroller and is operated through a membrane keypad. An SD Falsh Card allows easy software & configuration updates and may be used to download the 5,000 event archive.
|
|
The PowerMon Kolorimeter is a versatile applicable on-line measuring
instrument. It guarantees a permanent optimal water quality by the
continuous supervision of the legally prescribed limit value for total phosphate and ortho-phosphate in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
|
|
|
|
Sievers 900 Portable TOC
The Sievers 900 Portable TOC Analyzer, weighing only 12.5 kg and measuring 35.6 x 22.3 x 46.5 cm, is the first portable TOC analyzer of its kind, bringing the lab to the field. It can be hand-carried anywhere for on-line measurement, used for grab samples, or connected to an autosampler for high volume applications in a laboratory. It requires no external reagents or gas supplies and boasts a four-minute analysis time and a 0.03 to 50 ppb measurement range.
The 900 Portable’s color touch-screen display provides an intuitive menu to quickly establish operating parameters, such as setup and automated calibration procedures, and to graph historical or real-time data. A USB drive enables easy data transfer.The Analyzer was engineered for ease of use and cost-effective operation, requiring no external reagents or gas supplies. It typically needs only a few hours of preventive maintenance annually.
The Sievers 900 Portable won Instrument Business Outlook’s 2005 Gold Award for Best Portable Analytical Instrument Industrial Design.
|
|
The 8930 Includes:
* 900 MAX Portable Sampler Controller (P/N 8972)
* Center Section (P/N 8922)
* Cover (P/N 8890)
Components to complete the system:
* Power Source/Battery Chargers
* Intake Tubing and Strainer
Optional Components:
* Base/Bottle Tray, Composite/Multiple Bottle Accessories
* Pump Tubing
* Factory Installed Options
* Support Software and Data Transfer Unit
* Cables and Interfaces
* Accessories
For pricing, part numbers, and assistance in configuring your Sigma Portable Sampler to fit your application please call Hach: 1-800-227-4224
Sampling for regulatory compliance, monitoring or combined sewer overflows, storm water outfalls, and water quality research may demand a sampler with greater sophistication and capability. If so than the Sigma 900 MAX Controller is what you need.
|
|
|
|
|
|
Loveland, Colorado, October 2002 — For the first time, an on-line sludge volume index measurement can provide wastewater treatment plant operators early warning of upset conditions. With Hach’s OptiQuant SVI Analyzer, operational decisions can be based on Sludge Volume results that have been determined objectively and accurately.
The analyzer gives operators a reliable, continuous analysis of Sludge Volume without frequent minimal intervention. The in-situ measurement provides accurate analysis by measuring a true representative sample directly in the aeration basin. In addition, the OptiQuant SVI Analyzer saves valuable time with on-line analysis and graphical display of the settling curve. This eliminates the need for manual plotting to determine sludge age and return activated sludge flow rate.
During a measurement cycle, the OptiQuant SVI Analyzer utilizes a sampling vessel that is submerged in the aeration basin. Liquid is purged from the vessel with air from a built-in air compressor. When the sampling vessel is full of air, a valve is opened, allowing the sludge to enter. A sampling orifice allows solids particles and flocs to remain intact within the vessel, without the aid of moving parts. The settling rate and final settled sludge volume are measured with the Infra-Cam™ device inside the sampling vessel. With the addition of an OptiQuant TS-line suspended solids probe, the analyzer calculates the Sludge Volume Index.
The OptiQuant SVI Analyzer is a convenient tool for the continuous monitoring of Sludge Volume and Sludge Volume Index in-situ, with objective, accurate results.
|
|
|
|
|
|
Extensive on-line chemical monitoring of both the water/steam cycle and the water treatment plant on modern power stations enables careful control of the water chemistry to achieve peak efficiency and minimise downtime due to excessive boiler corrosion or scaling. Sodium is one of the most important parameters to be measured on boiler plant. To aid in this, ABB provides monitoring systems for the effective and reliable measurement and control of sodium.
The 8036 uses an ion-selective electrode and reference electrode to measure the sodium ion concentration in demineralization plants and in the steam/water cycle of steam-raising plants. 8036 is an advanced monitor requiring very little maintenance and measures sodium ion concentrations within the ranges 0.01µg kg–1 to 10mg kg–1.
An integral heat exchanger equalises sample and calibration solution temperatures, reducing calibration times and increasing accuracy. On initiating calibration, the monitor automatically introduces calibration solution, makes adjustments and returns the monitor to sample mode; no further action is required. The auto-ranging facility provides outstanding discrimination yet gives wide application coverage, e.g. 0.5 µg kg–1 operation, 10 µg kg–1 alarm, 300 µg kg–1 shut-down. Contacts provide a remote indication of the range.
|
|
The TN, or Total Nitrogen, Analyzer is an additional analysis tool available from BioTector Analytical Systems. When the BioTector oxidizes organic carbon compounds (for TOC measurement) it also oxidizes bound (organic and inorganic) nitrogen compounds and ammonium compounds into nitrate (NO3-). This nitrate is present as an aqueous ion in the oxidized sample fluid in the BioTector reactor.
When TOC analysis is complete, the sample fluid is brought from the reactor into a measuring cell. Here the spectrophotometer analyzes the wavelengths applicable to nitrates. The result is displayed as Total Nitrogen (TN). A cleaning fluid is then passed through the measuring cell automatically, which ensures that operator cleaning and maintenance is kept to an absolute minimum.
|
|
|
|
|
|
CheckPoint TOC Sensor
The new CheckPoint Total Organic Carbon (TOC) Portable/On-Line Sensor from GE Analytical Instruments is the first and only battery-powered TOC measuring device. CheckPoint can easily be hand carried to any point in a water system for rapid diagnostic sampling and troubleshooting, or used on-line for continuous monitoring. It is designed for microelectronics, pharmaceutical, and power applications.
CheckPoint’s ultra portability, fast analysis time, and versatility enable new problem-solving and diagnostic capabilities at points of use away from power sources. The Sensor typically operates four to five hours using the optional battery, or continuously with AC power. It weighs just 3.6 kg (7.9 lb), and features a 15-second default measurement, adjustable in intervals up to eight hours.
The CheckPoint TOC Sensor has a dynamic range of 0.05 to 1,000 ppb, and can measure TOC in water with up to 1.4 uS/cm conductivity from CO2. CheckPoint also measures conductivity/resistivity and temperature. CheckPoint features an Ethernet (Modbus over TCP/IP) and a USB port for convenient data download. CheckPoint requires no reagents, and is easy to operate and maintain. Calibration is typically stable for six months.
|
|
Sievers 900 Series TOC
The Sievers 900 Series Total Organic Carbon (TOC) Analyzers are designed for organic analysis in ultrapure and municipal quality waters in pharmaceutical, semiconductor, municipal, and power generation applications. The four 900 Analyzers (Laboratory, On-Line, Portable, and the 5310 C for municipal water) offer exceptional ease of use, analytical performance, productivity, and reliability. The random-access 900 Autosampler provides high sample capacity and fast analysis.
The 900 Series TOC Analyzers are easy to set up, operate, and maintain. With minimal training, an operator can analyze samples in less than an hour. Unlike many competitive analyzers that use technologies such as non-dispersive infra-red, the 900 Series Analyzers require no external gasses or reagents, offer 12-month calibration stability, and usually require just a few hours of maintenance annually.
|
|
BioTector TOC TN TP Analyzer
The TP, or Total Phosphorous, Analyzer is an additional analysis tool available from BioTector Analytical Systems. When the BioTector oxidizes organic carbon compounds for TOC measurement, it also reduces phosphorus compounds (with the exception of poly-phosphates) to orthophosphates (PO4-). This phosphate is present as an ion in the oxidized sample fluid in the BioTector reactor.
|
|
* Total Organic Carbon (TOC) Reagent Set, Low Range Test 'N Tube(TM) includes: Acid Digestion Solution Vials, Low Range TOC, Bufer Solution (Sulfate), Micro Funnel, Indicator Ampules, Low Range TOC, TOC Persulfate Powder Pillows
* Method: Direct
* Range: up to 20 mg/L C
* 50/test
|
|
MIVI PROCESS VISCOMETER FOR INLINE, ONLINE AND ON REACTOR APPLICATIONS
Simple, Rugged, Reliable, No wear part, Low maintenance, Operates in any position, Easy installation
GENERAL TECHNICAL DATA
• Maximum working temperature up to 200 or 300°C
• Maximum working pressure up to 60 bar or 150 bar (500 possible at request)
• Maximum viscosity range up to 1000 Pascal.second
• Watertightness of the body IP67
• Material 316L SS, Hastelloy, ...
• Protective coatings Diamolith, PTFE, enamel
• Exproof approval ATEX, FM, JIS
• Sanitary design on request
INDUSTRIES :
Petrol, Petrochemical, Chemical, Food & beverage, Cosmetics, Printing & coating
APPLICATIONS :
Polymerization control, Heavy fuel oil control, Inks control...
PRODUCTS :
Oil, Polymers, Fuels, Bitumen, Resins, Gels, Emulsions, Cheese, molasses, Paints, Inks...
|
|
Laboratory instrument LabMaster-aw
- High accuracy and repeatability
- Temperature controlled measuring chamber
- Increased measurement speed
- Measurement cell with saved calibration data
- Intuitive and simple menu navigation
- Modular expandability to multi channel system
|
|
PE 138
Salient Features & Benefits
- Portable Microprocessor Based, User Friendly & menu Driven.
- Measures directly pH, EMF, Temperature, Electrolyte Conductivity (EC), Total Dissolved Solids (TDS), Dissolved Oxygen (DO) & Salinity, Colorimetric, Abs./%T and Turbidity in Water sample one at a time.
- Unique DO measurement in Air saturated waters using Conventional Polarographic Probe .
- Programmable Calibration upto 3 Points for pH with Memory Back-up .
- Useful for Potentiometric & Redox measurements.
- Automatic/Manual Temperature Compensation.
- Accurate & Highly Stable .
- Elegantly styled into a Brief Case for operational convenience in Field .
- Operates on Rechargeable Battery & Mains Supply .
|
|
O2 and CO2 are the gases whose rates of consumption or production are most frequently measured for the purposes of study and process control (energetic metabolism, substract utilisation, etc.).
The measuring ranges of the GA analyser (0÷10 or 15% for CO2, and 21÷10% for O2) have been chosen specifically for your application.
The system is based on wellproven, high quality transducers, and is characterised by an extremely reduced internal volume, to reduce overall response times.
|
|
|
|
|
|
The Yeast Monitor is an instrument that measures the viable yeast concentration online and in real time. The instrument is ideal for incorporating into automatic yeast pitching and yeast harvesting systems measuring yeast slurries. Designed with the brewer in mind it can give a read out in a range of display units including viable cells/ml or % viable spun solids. It has proved to be a reliable workhorse in automating various brewery processes such as yeast pitching, yeast cropping, kraussening and controlling the feed rate to centrifuges
Model 710 is a budget instrument, ideal for a dedicated yeast pitching or cropping application requiring only one probe.
- The Model 710 is 50% lower in cost compared to previous models
- The main instrument is completely contained within a stainless steel IP65 enclosure.
- Communication options include separate 4-20mA outputs for live cell concentration and conductivity and options for Profibus and other fieldbus communications to the PLC.
- Calibration is quick and simple with a new auto-calibration option
|
|
The low level phosphate ion analyzer, model 7121, is used for online measurement of phosphate ion concentration in the boiler water, etc., of thermal power plants.
* Measurement time as short as 5 minutes
* Concentrations are output for each sample point separately, or those at all the sample points may be output together.
* If there is no sample at a sample point, the analyzer automatically skips to the next sample point.
|
|
W-20 Series Water Quality Monitoring System
Product Overview
Water is as precious as life itself. That's why current threats to water supplies make water quality analysis vital to our very existence. HORIBA has created the Multifunction Water Quality Monitoring System. Years of HORIBA sensor technology development have reached their culmination in the form of a 46-mm diameter sensor probe: a compact monitoring solution offering high pressure tolerance, long-term continuous measurement capability and highly accurate, simultaneous analysis of 13 parameters. In addition to the Water Quality Monitoring System's own capabilities, it was designed by HORIBA to be compatible with GPS and other data processing techniques.
|
|
Precolumn Amino Acid Analyzer OPA
modular amino acid analyzer system with automated precolumn OPA derivatization, optimized for the separation of physiological fluids with up to 30 AA
Ortho-phthaldialdehyde (OPA) is the most widely used fluorescent marker for amino acid analysis and can be used for completely automated analysis of protein hydrolysates as well as physiological fluids. The detection limit for primary amino acids is as low as 0.5 pmol, 20 times better than the ninhydrin method (secondary amino acids are not detected).
The system A0426-1 is identical to A0426 but is additionally optimized for the analysis of physiological fluids with more than 30 amino acids. This system is equipped with a more sophisticated autosampler for increased flexibility in derivatization and also features a separate column oven.
The consumables kit Y1000 contains all of the buffers, salts and reagents (in powder form) required for both A0426 and A0426-1.
|
|
Online Beverage Analyzer Cobrix3
Cobrix3 multibev is a multifunctional online beverage analyzer with extremely short response times. It is used in beverage production and allows quick line startups after a change of product. Cobrix3 continously measures without drift and without delays a number of parameters such °Brix, Diet, CO2, alcohol, temperature, pressure, sugar inversion, extract, original extract, degree of fermentation, oxygen, and conductivity.
Economical product monitoring
* Measurement values in real-time
* Deviations are shown immediately
* Optimal use of syrup and CO2
Highest accuracy for all beverages
* Diet and sugared beverages, alcoholic beverages and mixtures
* Limits and alarms can be set for up to 256 different products
Automatic data recording
* Traceable documentation and management of all data, including targets and alarms
* Mean values, standard deviations, production times and stops, quality and performance indexes
* Cp, Cpk and quality index
|
|
MATi stands for Metrohm Automated Titration System.
MATi 1 is a fully automated and PC-controlled water analysis system based on the new 836 Titrando and the new 815 Robotic USB Sample Processor XL. In particular, it contains the new quick aliquoting device 6.9958.007, an overflow buret allowing to quickly and precisely dose after the conductivity measurement 100 mL water sample necessary to do pH measurement, alkalinity determination and finally the water hardness titration.
The MATi 1 has all it takes to perform 59 water determinations fully automatically and includes all necessary accessories and sensors. It is a ready-to-use system that fulfills all your requirements:
Full water analysis
Quick aliquoting device
PC-controlled
High sample capacity
|
|
ATI has developed a completely new approach to on-line monitoring of ammonia that is far less expensive and much simpler than conventional monitoring equipment. The Q45N Dissolved Ammonia Monitor uses reaction chemistry that converts ammonia in solution to a stable monochloramine compound equivalent in concentration to the original ammonia level. The chloramine concentration is then measured with a unique amperometric sensor that responds linearly to chloramines while eliminating interference from excess free chlorine in solution.
Q45N monitors are available in two versions, one that includes all components conveniently integrated into a Nema 4X fiberglas enclosure, and a second that separates the monitor from the chemistry system for applications where a more convenient display location is desired. ATI’s Q45N monitoring package for dissolved ammonia provides the measurement stability needed to avoid complicated automatic calibration systems.
|
|
The Tekran® Series 2600 system allows the analysis of ultra-trace levels of total mercury in liquid samples. It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis.
Series 2600 is capable of providing a fully automated implementation of the new US EPA Method 1631. This method is capable of measuring waters with a detection limit of much less than the required < 0.5 ng/L (ppt).
Key Features
- Sensitivity measured in parts per quadrillion. Typical MDL: <0.05 ppt
- Atomic Fluorescence based: Greater sensitivity, selectivity and dynamic range than AA based systems
- Unprecedented modularity and flexibility
- Capable of multiple methods:
Direct reading
Single stage gold preconcentration
Dual stage gold preconcentration
- Works with stannous chloride or sodium borohydride reduction
|
|
|
|
|
|
SEKO introduces the 500 Series family of industrial control instruments designed for measuring:
■ pH
■ Redox
■ Oxigen
■ Conductivity
■ Turbidity
Design compliant with EMI regulations
All instruments comply with the 73/23 EC,89/336 EC,92/31 EC and93/68 EC directives,in order to guarantee maximum Electromagnetic Compatibility.
Serial Communication (RS485)
All instruments are designed for use with RS485 communication serial port,to monitor measurements and data recording.
Graphic Display
The graphic display,with 128x64 pixel resolution,ensures simultaneous display of the chemical measurement,the measurement of the temperature and the status of the various control outputs,by means oficons,throughout the entire process.
Power-assisted adjustment with probeeffectiveness test
The user-friendly software functions are designed to supply fast and effective assistance to the operator.This guarantees excellent calibration results.The system will inform the user about the quality of the electrode in use.
Flexible enclosure design
The enclosure allows various mounting options,such as panel,wall orpole mounting.
Control Functions
The instruments can be supplied with different software functions,ranging from Proportional-Integrated-Derived (PID),Timed and ON/OFF.
|
|
|
For automatic determination, monitoring and LC display of the total residual hardness (water hardness) in the water. The parameter to be measured and the appropriate measuring range are determined by indicator selection and by an appropriate user program. Control via alarm horn, stop solenoid valve or similar devices. Connection provided for recorder and central control station for transmission of analysis results (0/4 - 20 mA output signal), power supply 230 V, 50 Hz with EC type certificate according to guideline 97/23/EC.
|
|
|
|
|
|
Applications: Direct installation into engine oil gallery, transmission housing and fuel system for lubricant and fuel quality monitoring
Industries: Transportation, General Industry
Description: The FPS2800B12C4 is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic and gear oils, refrigerants and solvents. The multi-parametric analysis capability improves fluid characterization algorithms. The FPS provides in-line monitoring of fluids for a wide range of OEM and aftermarket installations including fluid reservoirs, process lines and pressurized high flow conduits (e.g., engine oil gallery) for applications that include on and off highway vehicles, HVAC&R, compressors, industrial equipment and turbines. A universal digital CAN J1939 compliant protocol provides easy to connect interface to main Host controller. A simple 4 pin connector allows for cost effective mounting options.
Features:
-Fully integrated, stand-alone module combines sensor and processing electronics
-Rugged construction for high pressure and high flow environments
-Proprietary corrosion and contaminant resistant coating for wetted parts
-Accurate, repeatable temperature, viscosity, density and dielectric constant
-Factory calibrated with NIST traceable fluids
-On-board microprocessor for real-time data analysis with 5, 12 or 24 Volts supply
-Highly reliable and long term stability
-Digital output as per J1939, CAN2.0B standard or CAN 2.0A featuring high-resolution parameter readings
|
|
This range of small probes with 3 mini-sensors measure pH, ORP, conductivity, temperature DO and level in wastewater, natural water and underground water. These SDI-12 ultra low comsuption probes can be connected to all SDI-12 systems
Using AQUA, AQUA 10 or AQUA 50 probes allows you to measure up to 6 parameters simultaneously: Temperature, Conductivity, pH, ORP, Dissolved Oxygen and Depth.
- Fast connection to ISCO devices, ADCON remote systems or any other instruments using the SDI12 protocol
- Ultra low consumption (40 µA)
- Connection of the sensors by simple "clip"
- Pocket size for maximum user convenience (length = 420 mm, diameter = 40 mm)
- Flexibility in use : its independent connection cable length allows adjusting cable length according to your needs
3 probes are available :
- AQUA : Wastewater
- AQUA 10 : Surface water (0-10 m),
- AQUA 50 : Underground water (0-50 m).
|
|
Conductivity
Honeywell conductivity technology helps measure, analyze and transmit valuable conductivity, resistivity and concentration information in simple and complex industrial processes with a complete line of analyzers, transmitters and conductivity cells.
Dissolved Oxygen
A complete line of analyzers, transmitters and dissolved oxygen probes ensures highly accurate, stable and trouble-free measurement in all types of applications.
pH-ORP
Patented non-glass Durafet probes and traditional glass pH technology help measure, analyze and transmit pH and ORP information in industrial processes. Honeywell provides a complete line of analyzers and transmitters, and several mounting types.
|
|
|
|
