|
|
PerkinElmer recently acquired Arnel, a recognized leader in engineered solutions for GC applications in the hydrocarbon processing, food & beverage and industrial hygiene markets. PerkinElmer continues to provide standard and custom engineered solutions based upon the Clarus GC platform.
PerkinElmer offers more than 100 turnkey solutions with defined specifications that cover a wide range of applications and requirements in many industries – petroleum refining/petrochemical, natural gas and dissolved gases in transformer oils – providing superior analytical capabilities and ease-of-use.
And if our standard analyzers do not meet your needs, we can configure an analyzer to match your requirements.
|
|
With one of the most comprehensive families of sensors and on-line analyzers for pH, conductivity and dissolved oxygen, Yokogawa is recognized as a world leader in the field of analytical equipment.
|
|
The Monitor 90 Ecometers are used to measure gaseous inorganic chorine, fluorine or ammonium compounds.
They are ideal for process monitoring and emission control, and comply
to the requirements of the German emission control regulations
(BImSchV) - among the strictest in the world. The high system availability makes the Ecometer an ideal component of automatic control systems for emission control installations.
Advantages:
-Minimal reagent consumption
for low operating costs
-Low maintenance, with selfchecking and automatic recalibration
-Automatic correction for
sample pressure and temperature
-Low sensitivity to interference,
below statutory requirements
-High stability, with low standard deviation and drift
-Industry standard interfaces and outputs
|
|
The PowerMon Ionometer is a versatile applicable on-line measuring instrument, which is used for the monitoring of the legally prescribed limit value in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
These analyzers and sensor assemblies are suitable for measuring fluoride concentration typically found in drinking water applications and are a simple, cost-effective solution for ensuring regulatory compliance in fluoridated drinking water.
Benefits:
- Low price
- Low maintenance
- No chemical additions
|
|
ANTEK's 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.
Features & Benefits
- Specific for fluoride
- Sensitivity from sub-ppm to % levels
- Results in 5 to 15 minutes
- Non-hazardous operation
- Gas, LPG, liquid, and solid samples
|
|
| ... products without technical information |
| |
|
|
|
|
Micromeritics’ low cost Gemini VII 2390 Series surface area analyzers utilize a patented twin-tube design to produce fast, accurate, and repeatable surface area and porosity results. An ideal tool for teaching, research, and quality control environments, the Gemini VII permits low to high surface area measurements without requiring exotic gases such as argon or krypton.
Three model options are available. The Gemini VII 2390a provides standard methods for: single-point and multipoint BET and Langmuir surface areas, total pore volume, micropore analysis by the t-method, and much more. The Gemini VII 2390p provides additional precision with the addition of a saturation pressure tube and is designed to provide a rapid measurement of the adsorption isotherm. The Gemini VII 2390t has all the capability of the 2390p with the additional ability to perform a BJH or Dollimore-Heal pore size distribution using both adsorption and desorption isotherms of up to 1000 points.
All models can be operated stand alone or connected to a computer running Micromeritics’ Gemini VII Windows® software. The Windows version includes easy-to-follow installation videos and system verification tests to ensure optimum performance and reliability. How-to videos provide on-screen instruction on instrument operation.
|
|
|
|
|
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process Control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Series AR710 HFADD Gas Chromatograph
The Series AR710 HFADD is designed for trace gas analysis of impurities in argon.
Applications: specialty gas manufacturers, industrial processes requiring inert argon, the electronics industry, gas separation plants, air separation plants, nuclear industry, certification of argon purity, semiconductor industry
- Analysis of trace H2, O2, N2, CH4, CO and CO2 in high purity argon (ppb)
- Sensitivity ... H2: < 15 ppb; O2: < 75 ppb; N2: < 100 ppb;
CH4: < 30 ppb; CO: < 200 ppb; CO2: <100 ppb
- Analytical cycle: all components < 10 minutes
- High analytical precision: ± 1% full scale
- Options: automatic or manual operation modes, auto-zero
- On-line monitoring by linking workstation
- Installation: bench or 19" rack
- Power: 110-220 V, 50-60 Hz
|
|
|
The Thermo Scientific FOCUS GC is a gas chromatograph conceived to maximize productivity of QA/QC labs with fast chromatography, yelding high quality results and yet requiring minimum operator training. Compact in size and very affordable, FOCUS GC is the ideal solution for every budget conscious laboratory looking for an instantly productive GC environment.
|
|
|
|
|
|
ABB on-line process gas chromatographs (PGCs) are comprised of three series: The PGC1000, PGC2000 E2 and the PGC5000. The PGC1000 is a field-mounted PGC and measures C1 through C9+ hydrocarbons, inert gases, and H2S in various HPI streams. The PGC2000 E2 measures discrete hydrocarbons up to C26 in HPI streams. This base PGC is also used in specialty analyzers for measuring fuel Sulfurs and speciates Sulfurs, refinery distillation analysis and temperature programmed analyzer for measuring hydrocarbon streams with a wide range of boiling points. The PGC5000B is used to measure up to C26 in simple applications with a fixed set of features.
The ABB PGC1000 is an economically priced field mounted gas chromatograph (no shelter required) using two analytical trains per analyzer that enable measurements of C1 through C9+, inerts and H2S in various Hydrocarbon Processing Industry (HPI) streams.
- C6+ component analysis with five minute analysis time
- Four streams with manual cal or three streams with auto cal
- Dual Calibration streams capability
- Class 1, Division 1, Group C and D classified enclosure
- Operating Temperature Range 0-130 degrees Fahrenheit
- Low power consumption -- 6 watts nominal, 45 start-up
- Windows CE Operating System
|
|
FTIR Laboratory Spectrometer
Step up to the new MB3000 FTIR spectrometer from ABB.
It is the most reliable FTIR system in the market with the lowest cost of ownership. Combined with the intuitive Horizon MBTM FTIR software, the MB3000 will facilitate acquisition, processing and analysis of samples.
Easy to use and maintenance free, it will provide constant analysis results for years to come. The MB3000 offers ease of use, reliability and constant results in order to address the concerns of lab users.
|
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols)
|
|
| ... products without technical information |
| |
|
|