|
|
Direct reading of Total chlorine down to 0.01ppm and is unaffected by color or Turbidity of the sample
* Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
* Low detection limit down to 0.01ppm
* Unaffected by sample color or turbidity
* Memory stores, tags and recalls up to 15 readings
* US EPA approved as an acceptable version of the ORION 97-70 electrode method for wastewater compliance monitoring of Total Chlorine.
|
|
|
|
|
|
IROX DIESEL Analyzer
Portable Diesel Analysis with MID-FTIR
IROX Diesel is a Mid-FTIR analyzer dedicated to Diesel analysis: With a different spectrometer cell, it's own on-board software and a vast calibration library handling is as easy as with the gasoline unit. This instrument also uses an improved calculation model, based on Cluster analysis and MLR, for the determination of the key properties of diesel fuel such as Cetane Number, Cetane Index and Distillation Properties. Fast and easy on-site custom calibration by adding a new sample in less than 4 min.
A spectral resolution of 4 cm-1 ensures results with highest precision in less than 3 min.
IROX DIESEL has been upgraded for a new application: the determination of the FAME (Biodiesel) content in Diesel Fuel.
Features
* Cetane number (correlation to ASTM D 613)
* Cetane Index (correlation to ASTM D 976)
* Cetane Improver
* Total Aromatics (correlation to ASTM D 5186)
* FAME (Biodiesel) content in Diesel Fuel
* Polynuclear Aromatics (correlation to ASTM D 5186)
* Distillation Properties: T85, T90, T95 (correlation to ASTM D 86)
* Built-in Density Meter
* Temperature control
* Fully automated
* No sample preparation: just press RUN
* No complex technical training required
* Small sample volume: 7ml
* Measuring time: 3 minutes
* Fast and easy on-site calibration of the correlation library
* Optional 6-position sampler
* Portable for field applications
* PC/printer interface
* MINIWIN IROX-PC software
|
|
|
|
|
|
IROX 2000 Fuel Analyzer
Portable Gasoline Analysis with MID-FTIR
IROX 2000 is an extremely compact, robust and user friendly Mid-FTIR spectrometer for the automatic measurement of the concentration of the most important components of gasoline. Thanks to an improved mathematical model and the use of a built-in density meter the instrument additionally provides most reliable results for key properties such as Octane Numbers, Distillation Properties and Vapor Pressure. A large number of country specific calibration samples is stored. Outlier fuels can be easily added even without a PC.
The portability and vehicle battery options are ideal for on-site field use.
Features
* 9 Specific Oxygenates (ASTM D5845)
* 14 Specific Aromatics and Benzene (ASTM D6277, EN238)
* Total Parameters: Aromatics, Oxygen, Olefins (incl. Di-Olefins) & Saturates (correlation to ASTM D 1319)
* Octane numbers: RON, MON (correlation to ASTM D2699, D2700)
* Calculation of AKI and Drivability Index
* Distillation properties: IBP, T10, T50, T90, FBP, E200, E300
* Vapor Pressure (correlation to ASTM D5191 and D6378)
* Optional 6-position sampler
* Built-In Density Meter
* Automatic Sample Introduction
* Small sample volume: 7ml
* Fast & easy on-site calibration
* Laboratory and Field Applications
* MINIWIN IROX-PC software
|
|
|
|
|
|
Sievers 900 Portable TOC
The Sievers 900 Portable TOC Analyzer, weighing only 12.5 kg and measuring 35.6 x 22.3 x 46.5 cm, is the first portable TOC analyzer of its kind, bringing the lab to the field. It can be hand-carried anywhere for on-line measurement, used for grab samples, or connected to an autosampler for high volume applications in a laboratory. It requires no external reagents or gas supplies and boasts a four-minute analysis time and a 0.03 to 50 ppb measurement range.
The 900 Portable’s color touch-screen display provides an intuitive menu to quickly establish operating parameters, such as setup and automated calibration procedures, and to graph historical or real-time data. A USB drive enables easy data transfer.The Analyzer was engineered for ease of use and cost-effective operation, requiring no external reagents or gas supplies. It typically needs only a few hours of preventive maintenance annually.
The Sievers 900 Portable won Instrument Business Outlook’s 2005 Gold Award for Best Portable Analytical Instrument Industrial Design.
|
|
The 8930 Includes:
* 900 MAX Portable Sampler Controller (P/N 8972)
* Center Section (P/N 8922)
* Cover (P/N 8890)
Components to complete the system:
* Power Source/Battery Chargers
* Intake Tubing and Strainer
Optional Components:
* Base/Bottle Tray, Composite/Multiple Bottle Accessories
* Pump Tubing
* Factory Installed Options
* Support Software and Data Transfer Unit
* Cables and Interfaces
* Accessories
For pricing, part numbers, and assistance in configuring your Sigma Portable Sampler to fit your application please call Hach: 1-800-227-4224
Sampling for regulatory compliance, monitoring or combined sewer overflows, storm water outfalls, and water quality research may demand a sampler with greater sophistication and capability. If so than the Sigma 900 MAX Controller is what you need.
|
|
| ... products without technical information |
| |
|
|
|
|
FastTracer
• Vibration triaxial analyzer
By positioning the FastTracer directly on the test point it is possible to acquire immediately the required information on the three axes allowing the operator to save time.
•USB portable
Plug and Play device with USB connection or wireless. Thanks to MEMS technology the sensor is highly miniaturized and it can be mounted on the most critical test points.
•Powerful and cheap
The acquired acceleration data are sent to the PC that then performs the data processing through the supplied software.This solution allows the full exploitation of the computation capacity of the PC by obtaining some advantages as fare as velocity,precision and costs of the product are concerned
•Real-time analysis in time and in frequency
The included software allows the operator to do real-time analysis both in time and frequency domain (acceleration, velocity, displacement, RMS). The user-friendly interface permits the analysis viewing in the most proper and flexible way
•Off-line and remote analysis
The data acquisition can be recorded in the PC and then investigated with the same interactivity of an online viewing or it can be easily transmitted via internet both in real time or through automatic reports in Microsoft EXCEL
•Accuracy and precision of measurements
An internal autodiagnosis system always ensures the correct working of the instrument by guaranteeing at the same time the precision of the effected measurements
•High flexibility with other software
The high adaptability of FastTracer in different fields has permitted a high grade of integration with the most common control systems (LabView, CVI, etc)
|
|
Type 107B - A, V, S vibration meter, spectrum analyzer
800 lines FFT, logarithmic/linear view.
Charge amplifier with programmable sensitivity
(use any piezoelectric accelerometer with known sensitivity).
Frequency range 2...10000Hz.
Firmware update by user. Free Windows software ConSpect.
USB interface ("Mass storage device"). FAT16 file system. 2MB memory.
NiMH accumulator, charger. Aluminum casing.
Size- 110x60x30mm.
|
|
COUGAR Portable Dynamic Signal Analyzer
* 4 to 28 input channels with ICP
* Up to 51.2 kHz sample rate per channel
* Powerful distributed Digital Signal Processors
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
|
|
|
|
VL 8000 is a high-end field balancing instrument with advanced vibration measurement, vibration analysis and machine diagnosis features.
* Features
o Intuitive operation with Windows interface
o Clear presentation of results on very large colour LCDo Very wide speed range up to 300,000 RPM
o Systematic detection of damage through envelope analysis
* Functions
o Unbalance measurement in one or two planes
o Conversion of unbalance correction into practical balancing methods (e.g. drilling)
o Frequency analysis to determine the spectral components of a vibration
o Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
o Envelope analysis to detect damage of rolling bearings or gears
o USB port to transmit the measurement values to a PC
o Offline PC software
* Applications
o Measuring vibrations on bearings and machine housings
o Field balancing on site
o Recording the condition of rolling bearings
o Observing and recording vibration levels
o Identifying frequencies in a vibration
o Detecting resonance points and identifying transfer functions
o Detecting machine damage
|
|
|
|
|
|
FastTracer
• Vibration triaxial analyzer
By positioning the FastTracer directly on the test point it is possible to acquire immediately the required information on the three axes allowing the operator to save time.
•USB portable
Plug and Play device with USB connection or wireless. Thanks to MEMS technology the sensor is highly miniaturized and it can be mounted on the most critical test points.
•Powerful and cheap
The acquired acceleration data are sent to the PC that then performs the data processing through the supplied software.This solution allows the full exploitation of the computation capacity of the PC by obtaining some advantages as fare as velocity,precision and costs of the product are concerned
•Real-time analysis in time and in frequency
The included software allows the operator to do real-time analysis both in time and frequency domain (acceleration, velocity, displacement, RMS). The user-friendly interface permits the analysis viewing in the most proper and flexible way
•Off-line and remote analysis
The data acquisition can be recorded in the PC and then investigated with the same interactivity of an online viewing or it can be easily transmitted via internet both in real time or through automatic reports in Microsoft EXCEL
•Accuracy and precision of measurements
An internal autodiagnosis system always ensures the correct working of the instrument by guaranteeing at the same time the precision of the effected measurements
•High flexibility with other software
The high adaptability of FastTracer in different fields has permitted a high grade of integration with the most common control systems (LabView, CVI, etc)
|
|
Type 107B - A, V, S vibration meter, spectrum analyzer
800 lines FFT, logarithmic/linear view.
Charge amplifier with programmable sensitivity
(use any piezoelectric accelerometer with known sensitivity).
Frequency range 2...10000Hz.
Firmware update by user. Free Windows software ConSpect.
USB interface ("Mass storage device"). FAT16 file system. 2MB memory.
NiMH accumulator, charger. Aluminum casing.
Size- 110x60x30mm.
|
|
COUGAR Portable Dynamic Signal Analyzer
* 4 to 28 input channels with ICP
* Up to 51.2 kHz sample rate per channel
* Powerful distributed Digital Signal Processors
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
|
|
|
|
VL 8000 is a high-end field balancing instrument with advanced vibration measurement, vibration analysis and machine diagnosis features.
* Features
o Intuitive operation with Windows interface
o Clear presentation of results on very large colour LCDo Very wide speed range up to 300,000 RPM
o Systematic detection of damage through envelope analysis
* Functions
o Unbalance measurement in one or two planes
o Conversion of unbalance correction into practical balancing methods (e.g. drilling)
o Frequency analysis to determine the spectral components of a vibration
o Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
o Envelope analysis to detect damage of rolling bearings or gears
o USB port to transmit the measurement values to a PC
o Offline PC software
* Applications
o Measuring vibrations on bearings and machine housings
o Field balancing on site
o Recording the condition of rolling bearings
o Observing and recording vibration levels
o Identifying frequencies in a vibration
o Detecting resonance points and identifying transfer functions
o Detecting machine damage
|
|
CIR-e3 PORTABLE ENERGY AUDIT ANALYZER
Most portable analyzers in the market require highly complex parameter establishing processes and start-up procedures.
CIR-e3 has been designed to facilitate the configuration and execution of electrical parameter measurements and, as a consequence, the analysis of energy audit studies.
Applications:
•Energy audits in installations.
•Preventive control and maintenance of transformer substations.
•Subcontracting energy audits.
|
|
The UPM6100 is a portable analyser suitable for electrical parameters measurement on single- and three-phase systems, as well as on direct current systems.
Main features:
- 4 MB Removable Memory Card for Data Logging
- Integrated Printer (Option)
- Large Graphic LCD Display with Excellent Visibility
- Graphic Representation of Voltage and Current Waveforms, Harmonic Spectrum and Phasor Diagrams
- FFT Harmonic Analysis up to 50th Order
- Sags and Swells Detection
- Power and Current Demand Calculation
- Compact and Rugged Case Carrying Accessories
- UL Listed Under UL61010B-1 and CAN/CSAC22.2 No.1010.1-92, File #E231725
- Dedalo Software Included
|
|
|
Portable network analyzer PNA 760 is used for field measuring of different electrical quantities. Using PNA 760 you can easily and quickly find out if electrical voltage complies with EN 50160 standard. It is equipped with numerous accessories for voltage, current measurement and data transfer through various interfaces.
|
|
| ... products without technical information |
| |
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
|
|
|
|
SIDEPAK™ AM510 PERSONAL AEROSOL MONITOR
The SIDEPAK™ AM510 Personal Aerosol Monitor is a rugged, lightweight, belt mounted laser photometer, weighing as little as 16 oz. It is compact and quiet, minimizing interference and worker discomfort. The built-in sampling pump lets you attach a wide variety of size-selective inlet conditioners for worker breathing zone or area measurements with a respirable cyclone or one of the three integrated impactors. The AM510 comes with TSI's Smart Battery Management System™, which includes long-running NiMH or alkaline battery packs and provides precise run time information in minutes remaining.
The AM510 personal aerosol monitor's easy-to-read display shows your data in both real-time aerosol mass concentration and 8-hour time-weighted average (TWA). With its convenient data logging and long battery life, the monitor is also ideal for extended sampling. Easy-to-use TRAKPRO™ Data Analysis Software lets you pre-program sampling events and create effective graphs and reports. Available in single- and 3-unit kits.
Applications:
- Personal exposure monitoring/IH studies
- Ambient/work area monitoring
- Trending/screening
- Engineering studies
- Epidemiology health studies
- Environmental sampling
|
|
|
Orion AQUAfast® II colorimeters offer the ultimate in ease of use and have many features such as a simple three-button user interface which ensures error free readings. They are designed for simple-to-use single parameters methods and are ideal for field or laboratory use.
|
|
| ... products without technical information |
| |
|
|
|
|
Years of development and attention to customer needs have made Thermo Scientific Niton alloy analyzers the first choice in XRF technology, bringing lab-quality elemental analysis wherever it is needed in a field-hardened package. Now, in addition to superior positive grade identification and composition analysis of alloy/metal coatings and substrates, the Niton® XL3t offers the benefit of our coating thickness/coating weight measurement technology - providing an "out-of-the-box" nondestructive solution for gauging the effectiveness of coating and plating systems.
Fast and easy-to-use, the Niton XL3t 800 not only performs at line and plating bath solution analysis, but provides more accurate measurements than non-XRF technologies such as eddy current, magnetic induction, and Beta backscatter. You get precise, nondestructive multilayer coating thickness results in seconds. Testing at the plating line both increases productivity and improves process efficiency - no more over-coating or under-coating. What's more, the Niton XL3t is your answer to measuring large or irregularly shaped samples, as well as small-diameter wiring or tubing. Cutting samples for benchtop analysis are a thing of the past.
Typical applications are:
-Galvanized zinc over steel
-Zinc or zinc alloy over steel
-Hard chrome over steel
-Electroless nickel over steel
-Chrome/nickel/copper over steel, Zamak™ or plastic
-DACROMET™ coating over steel
|
|
|
|
see the results for the following category : 
