|
|
Analyze Up To 2 Samples A Minute
Today, there are numerous requirements for the analysis of oil based materials. Some of the more frequently employed include: the measurement of wear metals in lubricating oils, the measurement of additive packages in lubricating oils and the measurement of the elemental content of edible oils. Although the specific requirements of each of these analysis are quite different, the analytical approach used is very similar.
Typically, laboratories interested in measuring the elemental constituents of edible oils have fairly conservative sample analysis requirements; perhaps only 10 to 100 samples per day. Most of these labs chose the Profile Plus Oil Analyzer for this application.
Laboratories for which the primary application is the analysis of wear metals often have extreme sample throughput demands; often in excess of 1,000 samples per day. High throughput wear metals labs typically chose one of our simultaneous oil industrial analyzers, such as the Profile HT or Prodigy HT for this task. A system like the Profile HT is capable of analyzing in excess of 2 samples per minute.
|
|
Leakwise Oil on Water Monitor
Leakwise Oil on Water MonitorLeakwise Oil-on-Water Monitoring and Detection Systems from GE Analytical Instruments provide early, reliable, low maintenance warning of hydrocarbon leaks and spills 24/7 without false alarms. A Leakwise system consists of a wire or wireless signal processor and one of more detection, depending on the application.
Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. Advantages include:
%u2022 Provides reliable coverage 24/7 with no false alarms
%u2022 Operates virtually maintenance free for years
%u2022 Detects oil layer thickness (as little as 0.3 mm)
%u2022 Offers an affordable solution for oil leakage detection
Applications include oil leak monitoring at refineries, petrochemical plants, pipelines, gas stations, power plants manufacturers, underground transmission, remote substations, transformer switchyards, marine ports, airports, steel and aluminum manufacturing plants, offshore rigs, groundwater and stormwater runoff, industrial wastewater treatment plants and more.
Leakwise is also an ideal tool for strengthening Spill Prevention Control and Countermeasure (SPCC) plans, as required by the USEPA. |
|
| Oleotrol is an automatic alarm system for water streams which operates continuously so as to prevent damages from oil leaks. It uses a physical property-light reflection from a film of oil on the water surface - to signal small amounts of oil in water streams which are normally oil-free. |
|
Model 6600 Oil-in-Water analyzer System
Teledyne's Model 660/661 was the industry standard in oil-in-water analysis for 30 years. The microprocessor based 6600 / 6610 improves upon our proven analog circuitry and the sample handling center. The new, compact modern design incorporates many new features at a significantly reduced cost. Critical features include:
Folded optical system optimized for excellent signal-to-noise ratio and stability
Increased reliability by eliminating many moving parts
New sonicator homogenizes oil (in-line) in water instantly (less than one second)
Improved auto-zero professional filter system prepares zero fluid for calibration and zeroing without long sparging cycle
Specially developed software with auto calibration features
Automatic self-cleaning sample cell suitable for high pressure and temperature
Manual calibrations done easily with collected zero fluid from sample system using the gravity fed reservoir
Manual or automatic span sensitivity easily checked with internal span flag once field calibrated
Faster response time
Modular design configured to meet specific application requirements |
|
| ... products without technical information |
| |
SCOTC Oil tank to control
Description:
- Controller level/temperature.
- Tanks including opening of filling and industrial air filter.
Advantages:
- Reduction of the obstruction of the tanks: 4 functions in 1!
- A simple adjustment of the points of commutation via the menu
- An analogical exit
- A protected control
- Reduction of the logistic costs, assembly and maintenance
Applications:
- Control of level/temperature of hydraulic reservoirs.
|
|
| ... products without technical information |
| |
The strong point of the threephase model OIL 440 is that it can separate the vacuumed swarf and liquid and return the filtered liquid to the line tool where it can be used again.
The machine is equipped with an ejection pump , so the liquid can be expelled during the vacuuming operations, in this way using the vacuum is fast and efficient ("E" version) in the same time.
|
|
Thanks to the 40-years of experience in this specific industry, RIBO designs and manufactures reliable and robust industrial vacuum cleaning machines, partcularly fit for all the cleaning and maintenace operations of metal working/cutting machines.
In fact, RIBO industrial vacuum professional cleaners can vacuum solid and liquid materials, also simultaneously, allowing to pre-separate materials inside the professional container, in order to facilitate wasting/recovering operations of vacuumed materials.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to its machines 3 YEARS WARRANTY for single-phase machines and 5 YEARS WARRANTY for three-phase machines. |
|
| The Tecnoil range is especially designed to suck up, clean and recycle the oil and coolant on line tools. Single and three-phase models from 3 to 15 HP, capacities from 150 to 700 litres. |
|
- Power: between 6 and 11 kW
- Air flow: 660 to 1220 m3/h
- Vacuum: 5700 to 6500 mm/CE
- Filtering surface: 12 to 32m²
- Capacity: 100L |
|
| ... products without technical information |
| |
Application
Diaphragm pumps manufacturer of the NT-series are oilfree dry running pumps for the generation of vacuum as well as the delivery and evacuation of gases and vapours. In chemical laboratories they are the more powerfull and modern alternative to water jet pumps, because they are more friendly to the environment at minimized operation and maintenance costs. Typical applications: on vacuum drying chambers, for distillation, drying, and vacuum filtering but also as backing pump for turbo-molecular pumps, gas transfer and the like. The pumps produce little noise and vibrations and are therefore ideal for installation in sensitive devices (e.g. chemical analysis).
Advantages
There are one-, two- three- and four-stage pumps available. The vacuum performance has been increased considerably, which expands the application field for both laboratory and industrial use. The one-stage pumps are designed for an ultimate vacuum of 70 mbar, the two-stage pumps for 7 mbar, the three-stage pumps for down to 1 mbar and the four-stage pumps for 0.5 mbar. International Protection code for all NT models is IP 42 (except those with switchable dual-voltage motors). The NT pumps are designed very compact and are exceptionally quiet and smooth-running. Smooth housing surfaces (except for the two-cylinder aluminium version) make the NT diaphragm pumps easy to clean. On the whole the pumps work almost maintenance-free. All models have easily changeable cocks and diaphragms. |
|
For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.
Smooth air flow makes these models ideally suited for applications requiring consistent air flow
Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation
Oilless operation means exhausted air is always clean and particle-free
Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction |
|
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Industrial wastewater treatment
* Aquaculture Aeration
|
|
Oil Tank
Sunfab offers its own range of hydraulic oil tanks ST 250 with a number of functional improvements necessary for high performance hydraulic systems.
Sunfab ST 250 radically reduces the air mixture in the hydraulic oil with an oil pipe around the return filter and a tried and tested baffle plate design. Air mixture is the main reason behind noise and cavitation of the pump.
Sunfab ST 250 features an external breathing professional filter, which is fitted in a protected position to reduce the risk of clogging. The filter is connected to the tank via a professional hose.
Sunfab ST 250 is supplied complete with correctly dimensioned connections, filter and brackets.
The oil tank is available in two different materials:
- ST 250 A in aluminium
- ST 250 S in stainless steel
|
|
In the oil reservoir all coming from oil separator is stored and cooled down. Any refrigerant trept with in the oil is boild of.
The size of oil reservoirs required is determined by the number of compressors manufacturer connected, compressor lubricant charge, system refrigeration charge and operating conditions.
|
|
Range supplements from 100 to 3300 liters, on industrial casters, feet, sleeves, with lid.
Containers out of polyester very solid and light, easy of maintenance thanks to the smooth walls and to the corners rounded, being able to contain foodstuffs like many chemicals. |
|
| ... products without technical information |
| |
| Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan manufacturers for cooling. UVD manufacturers of vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar. |
|
Made to complete the Panther range for trasnferring diesel fuel, these pumps are of the rotary blade type, self priming, with high flow rate and easy operation and installation.
Besides featuring an integrated bypass cock and suction filtration, they are aslo equipped with a suppliers of mechanical seal that ensures an high standard of reliability even at low temperatures.
Comapct , safe and reliable , they can be fitted to earthmoving machines, mobile industrial dispensers on motor vehicles and fixed dispensers in case only battery power is available. |
|
High speed delivery system
Direct current motors 12 V and 24 V
Maintenance free
Self priming Simple to install
Can also be used for pumping water
|
|
|
|
see the results for the following category
