|
|
|
|
|
|
MINIFLASH - The new Age of Flashpoint Testing
MINIFLASH is the only series of instruments for the automatic determination of the flashpoint of liquids and solid samples according to the advanced ASTM D7094 standard. This procedure describes the “Standard Test Method for Flash-Point by Modified Continuously Closed Cup (MCCCFP)”, which offers the highest repeatability and reproducibility and an excellent correlation to the D93 Pensky-Martens method: "there is no statistically significant bias observed between ASTM D7094 and ASTM D93 Procedure A” as concluded during the last Round Robin.
Test results are equivalent to other well known standards such as Abel and TAG, and thanks to its unique design MINIFLASH can be used for more difficult applications such as flash-point testing of contaminated samples like diesel fuel in lube oil or gasoline in diesel fuel and for biodiesel testing.
Its continuously closed cup design and small sample volume of only 2 mL offers maximum safety, avoids offensive fumes in the testing area and reduces sample waste.
Due to the true portability and rugged housing, the MINIFLASH is also the perfect solution for mobile labs and military applications.
Features
* Complies exclusively to ASTM D 7094 and ASTM D6450 (Flash-Point by Continuously Closed Cup)
* Maximum Safety: only 2ml sample, no open flame, continuously closed cup, no offensive vapors
* Excellent Correlation to ASTM D93, D56, ISO2719 (EN/DIN 22719), ISO13736, IP170
* Approved by: US D.O.T., RCRA, NATO and the US NAVY
* Approved for the ASTM specifications of recycled fuel and biodiesel
* The world wide standard in the flavors and fragrances industry
|
|
CLA 4
Automatic Flash- and Fire-Point with Open Cup according Cleveland Method
This flash-point and fire-point test method measures the tendency of a test specimen to form a flammable mixture with air.
Suitable for viscous materials having a flash-point between +79 °C (175 °F) and +400 °C (752 °F) except fuel oils.
Used to define the hazards of flammable and combustible materials used in shipping and safety regulations.
|
|
PM 4
Semi-Automatic Flash-Point Test with Closed Cup according Pensky-Martens Method
Method A:
for distillate fuels (diesel, kerosene, heating oil, turbine fuels), new lubricating oils, paints, vanishes and other homogeneous liquids.
Method B:
for residual fuel oils, cutback residual, used lubricating oils, non-homogeneous materials like mixtures of petroleum liquids & solids, surface-film building petroleum liquids or liquids with a viscosity above 5.5 cSt at +40°C. Used in shipping & safety regulations to define flammable and combustible materials.
|
|
PMA 4
Automatic Flash-Point Test with Closed Cup according Pensky-Martens Method
Method A:
for distillate fuels (diesel, kerosene, heating oil, turbine fuels), new lubricating oils, paints, vanishes and other homogeneous liquids.
Method B:
for residual fuel oils, cutback residual, used lubricating oils, non-homogeneous materials like mixtures of petroleum liquids & solids, surface-film building petroleum liquids or liquids with a viscosity above 5.5 cSt at +40°C. Used in shipping & safety regulations to define flammable and combustible materials.
|
|
ABA 4
(air or liquid cooled)
Automatic Flash-Point Test with Closed Cup according Abel Method
The Abel-Method
describes the determination of the closed-cup flash-point of petroleum products and other liquids having flash-points between -30 °C and +70 °C.
Further possible:
- the Equilibrium-Method
- the Abel-Pensky-Method
Suitable for: Biofuel, Fuel, Paint, Solvent, Varnish
|
|
|
|
|
|
Latest generation of Herzog Flash Point with proven reliability, superior design for Pensky-Martens automated closed cup testing
Designed to save time, money and bench space, HFP 339 Pensky Martens analyzer automatically determines flash point in strict compliance with the appropriate test method. In addition to standard test methods, the HFP 339 may be programmed with user-defined test protocols and test for samples with an unknown flash point. An alphanumeric solvent-proof keypad, large easy-to-read VF-Display and intuitive menu flow provide an exceptionally user-friendly interface.
To increase test productivity on products having an elevated flash point, the HFP 339 begins with an accelerated heating rate and automatically switches to the standard heating rate at the appropriate temperature to assure accurate results. Results are automatically corrected for barometric pressure and displayed on an easy to read HFP VF-Display. The last 9 results are memorized in the unit and can automatically output to an optional printer or computer system (LIM).
|
|
Semi-Automatic Gum Content Determination by Jet Evaporation up to 280 °C
Gum content is the residue of substances mainly aircraft fuels and motor gasoline) under investigation which can not be evaporated under test conditions. The gum content is measured in units of mg/100 ml.
Suitable for: Aviation Fuel, Fuel, Gas Oil, Gasoline, Jet Fuel, Motor Gasoline, Turbine Fuel
|
|
| ... products without technical information |
| |
OMICRON's CT Analyzer is a unique lightweight electronic multifunctional instrument designed to meet the highest standards for performing excitation, ratio, polarity and winding resistance tests on current transformers (CTs) as well as burden-impedance measurement.
Applications
- Burden measurement
- CT Winding resistance measurement
- CT Excitation characteristic recording
- CT transient behavior measurement (IEC60044-6)
- CT ratio measurement with consideration of connected burden
- CT phase and polarity measurement
- Determination of accuracy limiting factor (ALF), instrument security factor (FS), secondary time constant (Ts), remanence factor (Kr), transient dimensioning factor (Ktd), knee point voltage/current, class, saturated and non saturated inductance
- Assessment according to defined standards: IEC60044-1, IEC60044-6, IEEE C57.13-1993
|
|
The manual desktop operating terminal OT 276 allows manual, easy control of an AC test system.
The device is primarily intended as low cost, stand-alone solution for small AC source, which do not require an embedded control.
|
|
he DCT ReporteR instrument automatically tests Current Transformers reducing testing time from hours to minutes. Results can be printed out by the 40-character-wide built-in printer, or easily transferred to a PC via RS-232 and USB ports or memory-stick.
Digital Current Transformer ReporteR Features
* Tests turns ratio, polarity and phase angle
* Measures excitation values and presents results in a table or as a graph
* Calculates saturation voltage
* Tests winding resistance
* Tests insulation resistance
* Provides option to design and save customized Test Plans
* Features a built-in current source for secondary injection testing
* Outputs up to 2,000 Vac
* Easily transfer stored data to memory stick or PC via USB port
* ReporteR Software (included) makes report preparation fast and easy
* A large, color multi-language LCD screen and a keyboard
* Extensive memory for test results
* A 40-character-wide built-in printer
* Compatible with Microsoft Excel® and Microsoft Word®
|
|
Conventional AC test transformers are especially designed for testing objects of medium capacitance. These systems are particularly suited for tests requiring stable voltage even if the load changes under voltage (corona, wet & pollution tests) or when the load is inductive (inductive voltage transformers).
The possibility of stacking several of these transformer modules allows reaching very high voltage levels by keeping reasonable floor space.
|
|
For exponential current impulse ECI 1/20us, 4/10us, 8/20us and rectangular current impulses (RCI) and operating duty testing with current amplitudes up to 100kA.
Used in R&D testing of metal oxide surge arrestors and arrestor sections according to IEC 60099-4 and ANSI/IEEE C 62.11.
|
|
The Leakage Current Tester TOS3200 is designed to perform leakage current (touch current and protective conductor current) tests on general electrical equipment but not medical electrical equipment.
It enables you to conduct tests that conform to the requirements of the applicable IEC, UL, JIS, and other standards, as well as the Electrical Appliance and Material Safety Law. The memory in the main unit stores the 51 types of test conditions laid down in the IEC/JIS standards for information technology equipment, household electrical appliances, audio, video electronic apparatus, luminaires, motor-operated electric tools, and electrical equipment for measurement and control and in the Electrical Appliance and Material Safety Law, thereby enabling you to conduct standard tests with simple panel operation.
|
|
Leakage Current Measurement Essential for Electrical Safety
Automatically compatible with Networks stipulated by IEC/UL/JIS standards
Automatic measurement function (Measuring power supply polarity switching as well as the normal state / single failure state)
Stores data for 100 units
Power supply separation
|
|
| ... products without technical information |
| |
BPA 5
Ready-to-Go-Set to determine the temperature at which a bitumen tends to break rather than to flow when stressed.
The Fraass-Breaking-Point is the temperature at which the first cracks appear in the coating.
It can be applied for any homogeneous road or industrial bitumen.
|
|
|
|
|
|
The ETA-GT II geometrical tester is a compact measurement system for all stages of disc manufacture - including stamper verification, half-disc and bonded discs.
It enables all relevant geometrical data to be determined, including the inner hole and the lead-in and lead-out diameter. The disc tray permits measurement of disc eccentricity relative to the inner groove (lead-in) as well as to the outer groove (leadout). With its easy-to-use, intuitive user interface, it provides a graphic representation of accuracy for measured geometrical data such as eccentricity, unroundness and layer shift of optical
discs or stampers.
While the ETA GT II serves CD as well as DVD, the ETAGT II / Blue provides one measurement system for all formats CD/DVD/BD.
KEY BENEFITS
- Geometrical tester for all stages of disc manufacture,
from stamper verification to molded CD or half discs to
bonded DVD and BD (optional)
- Measuring all cases: Prerecorded, recordable and
rewritable
- Ready for Blu-Ray single and dual layer discs (ETA-GT II
/ Blue)
- ETA-GT II (CD/DVD) upgradable to ETA-GT II / Blue
(CD/DVD/BD)
- Evaluation of eccentricity and unroundness
- Layer shift evaluation for dual-layer DVDs and BDs
- Evaluation of inner hole, plus inner and outer groove
diameter
- Indicator axes for adjustements to compensate eccentricity
|
|
|
|
|
|
Rigid Pendulum Type Physical Properties Testing Instrument, RPT-3000W
This instrument allows measurement of visco-elastic physical properties under a curing process and the surface layer physical properties of the material being measured and other materials such as inorganic materials like concrete, cosmetics, paper and foods. This means that the test method does not depend on the substrate. Therefore, this instrument has applications for the development/improvement, quality evaluation, designing, trouble-shooting, and the production line and life evaluation of materials.
All materials transform from a liquid state to a solid state through certain actions (heat, light, time and others) and produce various physical properties. The change in phase from a liquid to a solid causes various problems. The most important item to evaluate from among the various material evaluations is the change in age of the chemical-physical performances in the process of curing and drying from a liquid state to a solid state.
Measurement
Fix the test piece coating plate on the cooling/heating block. Set the pendulum so that the knife-edge, the fulcrum of the swing, comes vertically into contact on the test piece coated surface. Apply free vibration to the pendulum. For measurement of physical properties, use a cylindrical edge. By analyzing this vibration, the curing process and surface's physical properties can be evaluated.
Features
-Coating Thickness Resolution: 0.01 ìm - 7mm
-Period of Vibration:0.05 to 2.000sec
-Logarithmic Damping Ratio: 0.001 to 6.000sec
-Test Temperature: -100 to +400 degree Celsius
-Measurement Time: 1 to 9999 minutes
|
|
|
This tester is suitable for measuring creep which occurs instantaneously and creep which increases with time when the material subjected to a constant load is left to stand under a specified temperature.
|
|
Go! BD S11 for BD-RE and BD-R
Go! BD S11 is a production control tester for BD-RE and BD-R, single- and double-layer. Go! helps manufacturers increase the number of tested discs and achieve better control of the production process.
Key features
• Support to analyze BD-R/RE SL/DL disc formats.
• SpeedScan measurement method.
• External Write support for most major drive brands:
- Set writing speed
- Set writing power
- Make automatic DOW cycles and power series
• Supports the use of A21 autoloader.
• Integrated database.
Key benefits
• Optimized for repeatable measurements in order to detect variations in
produced media.
• Cost effective tester optimized to work together with the CATS reference
tester.
• Based on a selected consumer drive for best analysis.
• Analyzes the discs’ recording quality through external recording drives.
• Easy, reliable operation using special user interface designed for production
|
|
|
Provides a safe and simple way to measure petroleum products tendency to thermally degrade and form coke under high temperature pyrolyzing conditions. Free up skilled expensive lab personnel by allowing operators to weigh the initial and final samples then start the test. It is that easy! The MCRT-160 automatically executes the factory programmed ASTM D 4530 test program. Plus, it can even be programmed to automate your own specialized time-temperature test profiles.
|
|
HFM 436 Lambda - Heat flow meter
With the HFM 436 Lambda, samples measuring 30 cm x 30 cm or 60 cm x 60 cm and of variable thicknesses ranging from a few millimeters to 10 (20) cm are tested between two heat flux sensors in fixed or adjustable temperature gradients. After a few minutes for the system to reach equilibrium, the built-in PC or external computer determines the thermal conductivity and thermal resistance of the sample.
Automatic plate movement and determination of the sample thickness simplify test preparation.
All test parameters as well as the calibration data are stored in the PC and documented.
Determination of thermal conductivity with the HFM 436 Lambda meets the industry standards ASTM C 518, ISO 8301, JIS A 1412, DIN EN 12939, DIN EN 13163 and DIN EN 12667.
|
|
|
|
|
|
The Dynamic Modulus Tester is a complete system that measures the velocity of the sonic pulses in materials such as fibers, films, tapes and papers. The test material is contacted by two transducers. The accurate measurement of the sound velocity between the transducers results in correct and repeatable dynamic modulus of elasticity.
APPLICATIONS
Fibers, Tapes, Nonwovens, Yarns, Polyester, Nylon, Spandex, Elastomeric, Monofilament, Carbon fiber and Glass fiber
ADVANTAGES
* Ensure product reliability and maintaining the manufacturer’s good name
* Quick information feedback
* Small, table-top instrument
* Controlling and lowering manufacturing costs
* Aiding in better product design
* Detect changes in polymer formula
* Maintaining a uniform quality level
FEATURES
* Digital display of the sonic velocity
* User friendly software program that calculates the dynamic modulus automatically
* Non-destructive testing for most materials
Operation
The Dynamic Modulus Tester is a complete system that measures the velocity of the sonic pulses in materials such as yarns, films, tapes, non-wovens, and papers. The test materials is contacted by two transducers. The DMT software calculates the sonic velocity, which is used to measure the physical and chemical structure of materials.
Properties Data
Strength, stiffness, elasticity, dyeability, resilience, fatigue, orientation and crystallinity.
Other uses
* Evaluation of experimental materials
* Production quality control
* Research, Assist in product development
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
