|
|
FS 2500
The ILPRA Fill Seal 2500 is a filling/sealing machine equipped with a turntable, conceived to meet the market request of a machine for automatic filling and packaging of liquid and doughy products at a price that even the manufacturer that has to start with a limited pruduction can afford.
It is particularly suitable for a small and medium productions, it is entirely made of stainless steel and anodized aluminium. All the main drive is mechanical, thus granting an high precision in working and a remarkable easiness of use and maintenance.
The functions of the machine are mechanically controlled by a cam system and a microprocessor that enables the machine to perform all the operations with the higest precision.
|
|
Operation
Filling and Closing of pre-manufactured cups/pots with sealing- and/or Snap-on-lid. Highest Flexibility at very short format change over times.
Products
Very liquid to pasty products in cups/pots. With special fillers, also bulk solids are possible.
Design
Model in balcony design. All drives are at the back side of the machine frame. All movements are linked by rotating shafts to the production units. Extreme compact and almost format free cup/pot magazine and denesting. Magazine accessibility without any platforms or steps even for small persons.
|
|
Technical DetailsNominal working width [mm] 480
Nominal draw-off length [mm] 120
Max. drawing depth [mm] 40
Max. reel diameters:
Bottom material [mm] 1.200
Lid material [mm] 400
|
|
Rychiger takes extreme care to meet the high standards required of baby food production machines. The modular machine concept with its hygienic design can be precisely configured to your unique product and material specifications.
The most important characteristics of our dedicated baby food machines are safe and clean product handling, quick format changeover, production reliability, easy cleanability and highest efficiency.
Innovative solutions combined with extensive knowledge of packaging materials ensure the highest seal integrity, easy peelability and a reduction of packaging costs without compromising quality.
Baby food packaging sealed on a Rychiger filling & sealing machine meets the highest demands for extended shelf life, seal integrity, easy peelability and consumer convenience.
|
|
|
|
|
|
FS 6000
The FILL SEAL 6000 TRONIC is a filling/sealing machine with an 8-station rotary table. It is completely automatic and conceived to package a wide range of liquid and doughy products (such as yogurt, sauces, jams, etc…)
In spite of its compactness, this machine can package 2 cups per cycle thus satisfying both medium and high production requirements (up to 6000 pieces per hour).
The machine can run containers made of several materials such as PP, PET, APET, aluminium, couplet cardboard.
Strongly versatile, the FS 6000 is available in two versions: the STANDARD version that seals pre-cut lids and the FILM version that seals and cuts film coming from a reel.
The cutting edge technology of this model puts it at the top range of our products.
- The totally mechanical main motions grant a quick and precise working cycle and reduce the maintenance operations a lot.
- The exclusive TRONIC filling system assures high precision in filling thanks to the electronic control of the two volumetric fillers.
- A Mitsubishi PLC together with a friendly use control panel allows setting all mechanical functions of the machine.
- The noble materials (stainless steel and anodized aluminum) the machine is constructed of, together with IP 65 protection class, CIP facilities (option), industrial design make the sanitization operations simple and grant the max. hygiene of the machine.
|
|
Easy peelable packaging is beginning to increase its share in the market for long shelf life products, originally dominated by the tin can. Consequently, Rychiger’s innovative machine concepts take into consideration packaging requirements such as a good barrier against oxygen, moisture and light, puncture resistance, color printed multi-layer lidding material, modern container shapes and consumer friendly functionality.
Important features for producers of peelable sterilised packaging are our:
Flexible and market proven machine technology
Safe & clean product handling
Quick format changeover
Production reliability
Easy cleanability
Innovative solutions combined with extensive knowledge of packaging materials ensure the highest seal integrity, easy peelability and a reduction of packaging costs without compromising quality.
|
|
Tube Filling Machines TFS 80-1/-2
Smooth, efficient and trouble-free loading of empty tubes into the filling machine and the discharge of filled and closed tubes from the filler into the downstream cartoner at output rates between 100 and 180 tubes / min. is guaranteed by innovative tube conveying systems.
|
|
|
|
|
|
Scope of use
For packing into cups such products as: cream, yogurt, cheese, butter, jam, honey, pate, salad etc. It is possible to pack different combinations of products (at two different products or the ones with compound consistency) e.g. instant soups with noodles, goulash with pieces of meet, yogurts with pieces of fruit. The packed products can have the temperature up to 75° C. The cups or other containers of various shapes and dimensions can be locked with caps made of aluminium thermally sealable foil or latch caps made of plastics.
Working principle
Cups are fed from a drum, placed in seats and moved further to the so-called packing round carousel. Process of filling the appropriate number of products is carried out with the use of cylindrical volume batcher or with the use of the selected set of batchers, depending on the kind of the packed product. Than the cap is put onto the cup and heated by a head. Date printer prints the date or short trade information on the cap surface. Ready packages are fed to receiving conveyor.
|
|
The machine for the volume filling of cups type APK
Automatic filling machine APK is appointed for volumetric filling of liquids and pasts (fluids, jams, honey, diary products, spreads, pasty, mayonnaise salad) – foodstuffs and non-foodstuffs character.
The machine is mechano-pneumatic and it is made of stainless steel. The control system SIEMENS is used and all pneumatic components are from FESTO. As a packing material can be used paper, plastic and aluminium foil. Lids are welding, impressing or covering. The machine may be adapted for various forms of covers and for filling of several components to one cover.
|
|
FILL-LOCK 15
Automatic filling and sealing machine for injected unit-dose strips, suitable for pharmaceutical and cosmetics.
Formats: from 0.25 to 10ml.
Max production rate: 4.500 unit-doses /hour.
|
|
innova 10-20K
High rate filling and sealing machine for injected unit-dose strips, for aseptic environments.
Formats: from 0,25 to 5ml
Max production rate: 10.000 – 20.000 unit-doses /hour.
|
|
innova 30K
High rate filling and sealing machine for injected unit-dose strips, for aseptic environments.
Formats: from 0,25 to 2ml
Max production rate: 30.000 unit-doses /hour
|
|
Automatic tube filling and closing machine for metal, plastic, polyfoil and laminate tubes with cassette infeed system.
Designed and constructed according to the highest technological standards to guarantee the maximum productivity and quality.
Designed according to G.M.P. standards and therefore suitable for sterile rooms and laminar flows.
Fast size changeover without tools.
Mechanical dose adjustment or servo motor drived (upon request).
The type of filling nozzle supplied depends on the product to be filled : available nozzle types are shut-off and blow-off for an easy cleaning. Cut-off, combination of blow-off and cut-off or valve-nozzle.
Tube Bottom-up filling . A mechanical lifting mechanism or run by a servo motor (upon request) controls the lifting and descending of the tube according to the fill product characteristics.
Excellent access for cleaning and maintenance.
|
|
Semiautomatic tube filler for pharmaceutical, cosmetic, chemical and foodstuff products.
Output:
Up to 30 tubes/minute for aluminium, laminate, polythene and polyfoil tubes, depending on product viscosity, filling volume and operator ability in the manual feeding and orientation of the empty tubes.
The dosing unit can be positioned outside the machine frame by turning the hinged support 90° and, using the foot pedal, can fill jars, bottles and various containers.
Closing unit for aluminium tubes performing both normal and double fold – fold finishing smooth or knurled.
Hot jaws or hot air sealing unit for polythene or laminate and polyfoil tubes. Seal finishing smooth or knurled.
|
|
AUTOMATIC TUBE FILLER MOD. CD150/CD180
Automatic tube filler for pharmaceutical, cosmetic, chemical and foodstuff products.
Output:
CD150: up to 150 tubes/minute CD180: up to 180 tubes/minutefor aluminium, laminate, polythene and polyfoil tubes, depending on product viscosity and filling volume Electrical controls by PLC. Colour touch screen operator interface. CD150: fixed dosing nozzle with tube lifting during filling. CD180: adopting servo motor technology Closing unit for aluminium tubes performing both normal, double and saddle fold fold finishing smooth or knurled. Hot jaws or hot air sealing unit for polythene or laminate and polyfoil tubes. Seal finishing smooth or knurled.
|
|
| ... products without technical information |
| |
|
Ranging from simple quench fluid tanks to highly complex buffer fluid set-ups, our systems generally have a modular structure and are tailored to individual requirements. Depending on their design, these systems cool or lubricate, circulate, apply pressure, protect against icing and ensure that mechanical seals work reliably, last longer and do not allow any leakages to escape into the environment.
|
|
Patented FoamMix systems produce foamed material from a variety of flowable sealants, incuding silicones, urethanes and plastisols at elevated or ambient temperatures.
|
|
| ... products without technical information |
| |
A sealing hose system was developed in cooperation with the Industrial Fire Brigade of Henkel KGaA Düsseldorf. This system enables sealing of positions which are difficult to access and which have operating pressures of up to a maximum of 10 bar (145 psi).
There are two set variations supplied: Premium Set and Base Set. Both sets are contained in a practical transport case and are easy to use.
|
|
CLOSED END HIGH PRESSURE BOOT SEAL
The new Poly II CE boot is watertight and airtight. This is the ideal boot for applications requiring vacuum testing. The boot fits any 2” pipe. Made of durable EPDM rubber, this flexible pipe-to-concrete connector meets or exceeds all ASTM 1227 and 923 requirements as well as Grease Interceptor specifications. Using this boot ensures watertight connections. This connector casts into concrete simply by using our Polylok plastic mandrel or any existing two-inch open-end boot mandrel. Complete with an external stainless steel hose clamp, when installed correctly this two-inch closed-end boot will perform up to 10 psi. The boot accepts 2” Schedule 40 or SDR 35 pipe. It can be cast into walls from 2.5” - 4” thickness.
FEATURES:
- Watertight and airtight
- Meets ASTM C-923, ASTM 1227, ASTM C 1644-06
- Fits any 2” pipe
- Made with flexible EPDM rubber
- Ideal for easy vacuum testing
- Comes with a stainless steel clamp
|
|
| ... products without technical information |
| |
|
Fives FCB kiln seals are for sure the best ones on the market. The newest experience with bricks lining demonstrates that the kiln outlet seal refractories can withstand severe conditions more than one year without repair (CALCIA Plant). The moulded end parts can last several years. All seals can be supplied separately.
|
|
for drying, calcination, combustion and pyrolysis. Optimized sealing in and around your plants: no incalculable emissions, no secondary air %u2013 and therefore more accurate process control with noticeably lower primary energy consumption.
|
|
| ... products without technical information |
| |
|
|