|
|
Maxflow combines filtration without filter aids - or, if they are required, with considerably reduced quantities of filter aids - and briquetting in a single unit. The main fields of application for Maxflow are particle filtration, the retrieval of recyclable materials and the purification of aqueous solutions.
Maxflow is available in three variants:
- The plug&play solution is a fast and effective solution to a great number of typical process requirements.
- Adaption of the individual components, for example by adding another filter disc to the unit.
- Implementation of a complete system, which can be custom adjusted to meet both known or as yet unencountered customer requirements.
GKD-CompactFiltration's Maxflow concept is a tried and tested serial product with the flexibility needed to be integrated into any customer-specific process. It has proven its efficiency in terms of meeting established standards and as a made-to-measure individual solution. Thanks to worldwide standardized parts and the global presence of GKD through six production facilities, the Maxflow system can be deployed anywhere in the world with equal efficiency. Comprehensive solutions competence, covering all stages from initial layout and dimensioning through to commissioning of the equipment and later expansion or modification to adapt it to changing production conditions, qualifies GKD-CompactFiltration as an efficient systems supplier and reliable technology partner in all stages of the process. |
|
PMPO filters operating on the market for many years and now are produced with an innovative system, which is the synthesis of the large experience acquired resolving a great variety of filtration problems of the cooling oils used in machine-tools.
Thanks to the fine degree of filtration obtained (up to 5 microns) the potential of machine-tools is enhanced.
With the NEW ECO GRINDING environment-friendly plants, we have succeeded in maintaining all the advantages of a cartridge filtering system, eliminating the disadvantages. |
|
Our bath maintenance systems combine sludge separation by centrifugal separators with foreign oil separation by DPS systems. Variable possibilities of fluid guidance allow the flexible use of these mobile systems.
According to intended use, you can choose between our separators S-15 and NZ-50 in combination with the different sizes of the DPS series. Different materials and control versions make possible the optimum integration into your system
|
|
| Filter Modules are smaller, more compact units than large central systems. They offer all the same capabilities described above but are designed to handle a single machine or typically a grouping of 2 to 6 machines. |
|
Transor Systems can be specified for and interface with all major manufacturers machines.
Central systems are offered after carefully reviewing the requirement of the application and include dirty and clean oil storage, all pumps required for filtration and delivery of clean oil to the machine and a refrigerant system.
Central systems such as those shown in the photos, are designed with a modular concept that provides extensive back-up to address any downtime and serviceability concerns. |
|
Hydrocyclone Cooling Lubricant %u2013 cleaning systems operate in all applications where heavy dirt particles are to be separated from low viscous liquids %u2013 e.g. on machine tools (especially grinding machines), but also on machining stations, transfer lines and parts washing plants.
|
|
| ... products without technical information |
| |
Used in a large range of application, total loss oil lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
|
|
The ML50-CW-R-OEM is a compact CW Fibre Laser delivering up to 50W of output power, through a near diffraction limited beam (M²<1.1). The excellent beam quality and power stability make the Manlight Fibre Laser a multi-purpose tool. Our patented “Injection Technology” allows the use of highly reliable broad area laser diode pumps, for a cost effective and maintenance-free operation. The all-fibre design guarantees the robustness of the laser, without any optical parts to align or to stabilize. The simple integration of the system requires no after-installation service. The ML50-CW-R-OEM is the ideal solution for a broad range of industrial and scientific applications.
It also exists in 5, 10 or 20W version or in a 19", 3U Tunrkey version. |
|
StarShape
The new StarShape series from Rofin/Baasel Lasertech provides a large number of different lasers for micro-material processing. All StarShape series applications have one thing in common: the precise, local, selective ablation of areas of the surface of a component or tool by vaporization or vaporization-induced displacement of the molten mass.
The lasers in the series can be used to structure surfaces, drill through-going or blind holes, or remove selected layers of substrates precisely to the micrometer. The materials that can be processed range from metals through ceramics and diamonds to plastics.
To cover most of ablating micro-material processing, the StarShape series includes both Nd:YAG lasers in cw or Q-switched versions, and CO2 lasers. The available wavelengths thus range from green to within the infra-red end of the spectrum. Interaction times from the few nanoseconds of end-pumped solid state lasers up to the continuous-wave range, offer suitable laser solutions for all of the above-mentioned applications. |
|
| ... products without technical information |
| |
Metalworking Lubricants, a specialist business unit within ROCOL Lubricants Group, develop and manufacture a range of innovative fluids and lubricants whose performance is designed to meet the increasing demands placed upon today's production processes.
Commitment to new product development is unrivalled with experienced chemists dedicated in formulating cutting edge technology.
ROCOL Metalworking Lubricants products benefit machine shops, precision engineers, and fabricators throughout the world in many different industries.
|
|
TG-250
Through its' years of experience, Transor has evaluated many coolants and has listened to requests and suggestions of companies in the grinding and superfinishing industry. The result is TransoGrind TG-250, a product that offers the best of both European and North American technologies.
Specifications
Viscosity: 39 SUS at 100°F
Flash Point 275°F
EXP Synthetic
This product is fully synthetic, being comprised of identically bonded molecules, adding lubricity that helps in the dissipation of heat, resulting in maximum stock removal.
Specifications
Viscosity: 43 SUS at 100°F
Flash Point 312 °F |
|
ETERNA 2000 is a high performances machining fluid which can be
recycled. It is general-purpose (all raw materials, all types of machining), ISO classification: MAH. Soluble fluid of machining, standard true
solution, of particularly advanced design and technology. Product
answering the Eco-design label. Guaranteed without nitrites,
borated derivatives, organochlorinated, sulphur derivatives and heavy
metals. ETERNA 2000 is chemically and biologically stable,
ultrafiltrable, reusable. The very high cooling capacity of ETERNA 2000 allows to obtain state surface of high quality in the roughing or finishing operations. Its stability and its weak retention on pieces and chips allow an important reduction of machining fluids consumption. Not foaming,
anti-corrosive, not gumming, ETERNA 2000 also makes it possible to
obtain an environment of clean working station (produced without
mineral, vegetable or synthetic oil). |
|
US1, US2 & US3
Transor Filter has achieved a high level of recognition as a leader in EDM filtration. Working with builders and end users we have had significant exposure to various oils and how they affect performance. Through this experience, the family of US dielectric fluids came into being.
Irvin Kaage, Transor Filter USA President:
"Our primary business is filtration, but because we are filtering oil you can't help but accumulate information over the years that makes a person knowledgeable about oils. We took this information and formulated a dielectric that works extremely well in the EDM process and our ONE MICRON filtration system. Most important is that it is available at an affordable price. A major aerospace company employing over 100 EDM was using many different oils and wanted to standardize. We were working with them on a filtration project and suggested they try US dielectric. To our surprise, they chose US-1 as the preferred product for performance and value."
Whether you EDM small parts or large forging dies, US-1 is a product you can rely on. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
