|
|
The STA DPS system is a plate phase separator for static separation of two fluid phases which differ in density by at least 5% (e.g. coolant lubricant emulsion and hydraulic oil). Using gravitation (sinking of the heavy phase) and coalescence (merging of droplets), the light phase is made to float when flowing through the unit, and continually runs off.
Plate phase industrial separators are used more and more frequently on account of increasing requirements regarding purity of industrial fluids, e.g. the separation of mineral oils from waste water, emulsions and degreasing baths. They can be operated with very low operating costs and can be used universally.
|
|
The oil seperator effectively removes oil from the discharge gas in the strainer elements and returns the oil through a high precision float cock to the crankcase or oil control system. The efficiency of oil recovery is dependent on the reduction of gas velocity in the separator itself. Providing the oil separator is correctly applied, this will be in will be about 97 % to 99 %.
The use of ESK oil separators protects the suppliers of compressor from defects cause by lack from lubrication and improves the heat transfer in the evaporator.
Oil industrial separators should be installed whenever the following applications are considered:
• Evap. temp. below <-10 °C
• Blast professional freezers
• Capacity control
• Two stage plants
• Parallel systems
• Cascade plant
• Flooded systems
• Booster
|
|
The Parker oil separator removes oil from system refrigerant by means of a highly efficient coalescing filtration. The professional filter is 98.5% efficient, filtering oil and particles down to 1/10 of a micron while leaving a trace amount of oil necessary for adequate system lubrication. The separator is ideal for recovery and reclaim operations.
|
|
- Separates insoluble oils that migrate from machining fluids.
- Recovers the original characteristics of the machining fluid.
- Speeds up the oil coalescence process.
- Prevents the development of bacteria owing to a programmable oxygenation system.
Standard capacities: 600 - 1200 - 2000 - 3000 Litres
Options: Swarf/chip separation basket - fine filtration - treatment of bacteria by ultra-violet process |
|
reduction of set-up times by quick work-piece positoning on
all conventional work tables with T-grooves.
(drilling-, milling-, erosion- and measuring-machines)
-polished sliding blocks are used to fit the M-Fix positioning-system
on milling units with 10, 12, 14, 16, 18 mm grooves.
-The selection of the positioning angel ist flexible, thanks to
positioning pins (they can be used separately; 0°, 90°, 180° or 45°)
-The retractable tenons are manufactured with a precise positoning
towards the T-groove, with a precision of only 0,015mm.
-For the clamping of the work piece you can use
conventional clamping-tools.
-Scope of supply:
4 it set base inclusive nuts and screws
alternatively adapter borders T-groove accommodation 10-18mm |
|
Professional filters industrial separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the industrial protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets suppliers |
|
| The MASTER is a range of high head and high-efficiency gravity industrial filters which use non-woven professional fabric filters. The MASTER range is able to treat between 200 and 1000 litres of neat oil per minute and from 400 to 2000 litres of water-based emulsions per minute containing both metallic and non-metallic particles. The entire filtration process is completely automatic. |
|
| ... products without technical information |
| |
Molykote® dispersions are finely dispersed
solids or other lubricants suspended in
lubricating fluids. They are preferred where
it is necessary to apply solid lubricants in
liquid form to units in operation or to
otherwise inaccessible points. Some
dispersions serve as antiwear and extreme
pressure additives for lubricating oils like
gear and engine oils. |
|
| ... products without technical information |
| |
Ganter has for many years been a well-known supplier of oil sight glasses made of plastic and aluminium. The range of products has now been enlarged to include oil sight glasses made of stainless steel and brass. In addition, an “ATEX” sight glass made of aluminium has been developed
for use in explosion hazard atmospheres which is available in three sizes with different threads, complying with the directives of the European Union for explosion protection. |
|
"Level switching NS OM
The level switch NS OM-64ej-KS series has been designed for systems that require visual and electrical control of the liquid level. The magnet is placed in the visual indicator to avoid a magnet field close to the liquid hence the unit is perfectly suitable for the control of coolants contanimated with ferrous chips.
The new Bühler “easyjust” system simplifies the adjustment of level contacts. The system consists of level contact cardridges that clip onto a gold plated contact board. This board can accomodate up to four contact cartridges without wiring. Also the function of the contacts (normally closed or normally open) is to changeable easy.
The interface with the tank top is by a flange according to DIN 24557 part 2.
applicatively for cooling lubricant
visual and electrical monitoring
adjustable level contacts
bistable level contacts = only one float
high float sensitivity
international standard flange dimensions
easy installation
maintenance free" |
|
SLV/SLVT :
- Vertical oil level calibre
- Vertical oil level gauge with professional thermometer
SNLS/SLNT :
- Threaded oil level gage
- Threaded oil level indicator with contrast screen
SLP :
- Press-Fit oil level indicator with contrast screen
LSB :
- Oil level indicator in transparent thermo plastic
CF/GF :
- Dome shaped threaded level indicator
- Steel mounting flange |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|