|
|
The GHT 4x4 is the total traction filter press with high productivity. The filter plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter press opening and closing sequence to the minimum. Four hydraulic cylinders placed on the plate pack corners ensure perfect operation and limited structural stress, even in the most unfavourable working conditions. Different from the traditional push-type systems, the “total traction” system does not transmit any stress to the upper beam, which is only subjected to weight of plates supported from it. In fact, the forces applied by the closing device are subjecting the tie beams to tension, which avoids stress on the frame and consequently, the risk of structural deformation. Effectively guarded moving parts and the use of state-of-the-art electronic interlock systems mean that the GHT 4x4 conforms to the highest operator health and safety regulations. Routine maintenance operations are simple, thanks to easy access to the filter plates, both for inspection and for filter cloth replacement.
|
|
AUTOMAT is a side-beam filter press, characterised by functional design and extraordinary versatility.
Thanks to its strong structure and wide range of models the AUTOMAT filter is able to meet any requirement of solid-liquid separation.
AUTOMAT filters offer the highest level of flexibility and production capacity according to the specific requirements of their required applications.
By means of a PLC (programmable logic controller), the AUTOMAT filter can work fully-automatically, with the operator supervising only the cake-discharging phase.
|
|
Star Plate and Frame Filter Presses are designed and built to provide you with years of dependable service. Filters are sturdily built, with a rugged carbon steel stand coated in durable epoxy paint. Standard heads, plates, frames, and their components are fabricated from solid bars, plates, and forgings of 304 stainless steel. Heavily reinforced for maximum life, the precision-machined plates, frames, and heads warrant a tight seal and near-zero leakage without gaskets.
Star Filter Presses can be fabricated in 316 and 316L stainless steel, as well as other special alloys upon request.
Applications include:
• Food and Beverage Processing
• Mining and Metalworking
• Pharmaceuticals, Cosmetics, Biotech Processing
• Chemical and Petrochemical Processing
Benefits:
• High sludge capacity
• Low maintenance
• Large filtration surface area
• No gaskets to maintain
• Excellent corrosion resistance
• Withstands temperatures of up to 375ºF (190ºC)
• Easy to operate, simple to clean
• Expandable by adding plates and frames
• Low filter media replacement costs
• Easy to sanitize
• Minimal plate stack drip
• High liquid flow rates
• Portable
New Star PolyPresses are also available for efficient dewatering with high corrosion resistance.
|
|
KE is a side beam filter press with reduced dimensions, suitable to be installed even in very small spaces. Thanks to its solid structure and simple design, this type of filter is an extremely functional machine.
KE filter presses, exactly like the other bigger machines manufactured by DIEMME, have been designed to also work at high feed pressure values: 12,15, and 30 bar.
|
|
DIEMME Filtration develops special customised designs of mobile filtration plants with filter presses, in order to meet any customer's requirements.
The advantages of DIEMME mobile filtration units:
- Compact
- Complete plants for all applications
- Easy personnel access to the plant, for both operation and maintenance
- Capable of wide range of applications with the employment of different
sludge conditioning methods
|
|
ME is a lateral beam filter press, extremely versatile, which can be customized in function of the applicative process and clients' needs. The filter press ME is full automatic, with short cycles and minimum idle times. Thanks to the simultaneous opening system of the plates pack the cake's release is the extremely quick. ME series offers both big and small models. The latter ones are the smallest filters in the world equipped with an integral automation.
|
|
| ... products without technical information |
| |
|
The pneumatic press EP15 was built for semplifying and automating the hot mounting process. The operator has only to select, from the digital display, the appropriate mounting cycle for the resin type which is going to be used. Preset mounting cycle parameters (temperature and timing of heating and cooling), optimised for each type of resin, are stored in the control panel, and can then be selected for starting the embedding cycle. At the end of each cycle, the cooled sample can be pulled out from the heating chamber and passed onto the grinding/polishing process.
|
|
Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. With the PP 40, RETSCH offers a pellet press which presses a wide range of materials such as slag, ores, minerals and cement to strong pellets with a smooth surface.
The PP 40 features an individual pressure force regulation in the range of 10 to 400 kN. Besides controlling the pressure force, it also determines build-up, maintenance and release of force during pressing. This reduces the inner tensions of the sample and ensures that even difficult materials are pressed perfectly.
Advantages:
- individual pressure force regulation 10 – 400 kN
- 1-button operation with graphic display
- 32 parameter combinations can be stored
- pressing tools for various diameters and aluminium cups
- suitable for very hard materials
- pressure plate made from tungsten carbide
- easy and safe operation
- maintenance-free, CE-conforming design
- 2 year warranty
|
|
* type LBR uses mechanical, type LBH hydraulic lifting
* balls allow movements at any angle
* moderate rolling friction
* especially useful for dies that have to be accurately positioned by hand
|
|
* for die weights above 10 tons
* low rolling friction
* hydraulic lifting
* underside can be used to move rolling bolsters
|
|
The PPS can be mounted to the back or side of the press. In many cases it is fixed permanently, but swing-aside and even mobile versions are also available. Configuration and layout are flexible, allowing the system to be adapted to virtually any environment
* die Xchange time 15mn
* accurate, repeatable positioning
* stroke up to 2,40 m
* built-in safety mechanism using sensors to monitor movements
* ready for full electric control, optionally with appropriate switching module
|
|
* easy snap-in lock
* one pair is suitable for up to 3 tons per metre
* light-weight construction
* low rolling friction
* optional height-and-leve-adjustable mounting brackets allow use with different presses
|
|
Bespoke 'T' & 'B' Block Systems for Rapid Tool
Change. Roll on - Roll off facility dramatically reduces
tool changeover times.
Advantages:
Roll on - Roll off facility:
- Dramatically reduces tool changeover times.
- Eliminates tool and press bed damage.
- Allows accurate tool positioning.
The Omnitrack 'T' & 'B' Block systems are designed to facilitate
rapid tool change on any type of press / machine.
The standard format consists of housed spring-loaded Ball Units
which are inserted into the tenon slots of the press. When in the
raised position, the balls protrude above the bed level allowing
the tool to be rolled onto the bed and positioned accurately.
When clamping is carried out the balls retract, lowering the tool
onto the press bed. When clamping is released the balls lift the
tool, allowing it to be rolled from the press.
Standard slot dimensions for 'T' & 'B' bars are shown. We also
manufacture these systems for non-standard slots. Ball pitch,
deflection, load and clamping are application specific. Contact
us for a bespoke solution.
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Types of loads :
- Coils,
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Bars or pipes bundles …
- …
|
|
Precise tension control is essential in maintaining accurate register and reducing paper waste during make- ready and production.
MEGTEC infeeds deliver maximum productivity by providing stable web tension over wide operating ranges.
MEGTEC infeeds are available as independent units or integrated into MEGTEC pasters.
Shafted and shaftless technology is available to suit all applications from book printing, newspaper printing, to high-volume offset printing.
|
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output.
|
|
Cattaneo s.r.l. will expose in the International Fair Euro Blech 2008 at Hannover in date October 21-25, Hall 27 Stand B20. It will exhibite a new Compact Coil Line DSF-8-800, with Decoiler 5 Tons and Straightener/Feeder 800x8 mm.
It projected to obtain the maximum flexibility and the best performances four our Swedish Customer, in the motor vehicles sector.
The Compact Coil Line is engineered according with the most modern technologies; it will utilise a latest generation control system Siemens.
|
|
| ... products without technical information |
| |
FLEXIBLE AND AUTOMATIC BENDING PRODUCTS
ASTRO CELL it is designed to be the perfect automatic bending system. Long running scheduled automatic operations are possible, with the automatic tools layout changer, automatic handling-jig changer, automatic work-piece gripper changer, even if they are small quantity batches. Coping with different kinds of small quantity products offers a vast improvement in productivity, and shortens delivery time. The bending process times can be reduced, and an improvement in the quality can be obtained.
|
|
Nowdays the request for bending cells is growing, nonetheless had GASPARINI picked up, since several years, the philosophy for creating an automated bending isle, responding ahead of time both to safety rules and productivity requirements.
The suppleness own of GASPARINI robotized bending isles makes them convenient not only for medium – large production but also for repeated small allotments.
All models can be integrated in a bending cell
|
|
| ... products without technical information |
| |
Precise tension control is essential in maintaining accurate register and reducing paper waste during make- ready and production.
MEGTEC infeeds deliver maximum productivity by providing stable web tension over wide operating ranges.
MEGTEC infeeds are available as independent units or integrated into MEGTEC pasters.
Shafted and shaftless technology is available to suit all applications from book printing, newspaper printing, to high-volume offset printing.
|
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category