|
|
| ... products without technical information |
| |
Richmond Technology engineers developed the CAV-40 product in response to the market demand for a high barrier clear film with excellent cleanliness characteristics. The proprietary outer layer delivers extraordinary moisture vapor barrier properties while the inner sealant layer offers outstanding cleanliness characteristics. None of the harmful process aids (i.e. slip, anti-block, etc.) used in traditional polyethylene sealant layers are present.
CAV-40 is the choice for clean transparent moisture barrier protection of sensitive product during transport and/or storage. |
|
ROM emulation is a powerful and versatile method of microprocessor testing. ROM emulation has emerged as the technique of choice for microprocessor test and diagnostic applications. A microprocessor-based board is tested by replacing the boot ROMs on the Unit Under Test (UUT) with memory emulation pods. Each pod handles eight bits of the data bus. Processors from 8 to 32 bits can be controlled with one to four pods (even the most advanced CPUs such as the Intel Pentium generally use only an eight-bit boot path). The emulator takes control of the UUT by resetting the processor and, under the test program's control (monitor program), exercises all functions on the board. Synchronization with the UUT is automatic and requires no additional hardware or connections.
|
|
Geotest's offers a large selection of PC, 3U and 6U PXI instrumentation chassis allowing test engineers to design system configurations specifically for automatic test equipment (ATE) systems, data acquisition, process control applications, and other industrial applications that require PC-based and PXI-based instrumentation.
|
|
Geotest offers a wide selection of digital I/O products that meet the demanding requirements of any functional test application. With test rates up to 200 MHz, pin counts that range from 32 to 512 pins per system, vector memory that ranges from 256K to 128MB per pin, and I/O levels that include TTL, PECL, LVDS, and programmable, Geotest has the right products for your custom application.
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
CTS Connect - Air Actuated & Manual Connectors
Manual Connectors
The CTS ConnectTM line of manual connectors are designed for durability and superior wear. These rugged connectors are designed with the operator in mind, featuring ergonomic actuating levers and optional comfort grip handles.
Air Actuated Connectors
CTS ConnectTM air actuated internal or external connectors effectively seal on smooth, rough or threaded circular features of a part. The connectors consist of an air-driven internal piston that compresses the durable proprietary seal material against the surface of the part. This creates a tight seal that meets all test pressure requirements, regardless of surface shape or finish |
|
PART # SBS-IBEX
BATTERY DIAGNOSTIC TESTER
The new SBS-IBEX is a cutting edge digital battery diagnostic tester meeting all IEEE Standard Recommendations for all stationary applications such as telecommunication's back up power, utility switching power, uninterruptible power systems (UPS) and more. The new IBEX can measure the accurate internal resistance (R), voltage (V), temperature (ºC) with the world's first ripple-removing algorithm (KR PAT No. 0494489) within a short time (3 seconds or less) during flotation charge. The new IBEX has been in use worldwide with the utmost in satisfaction and reliability by end users.
The SBS-IBEX comes complete with Exmons Battery Management Software that allows the user to trend battery measurement data, export data to excel and/or create a full report with the click of a button. Note: Trended battery measurement data can detect impeding battery failures before a power backup is affected and with enough advance notice to replace the failing batteries.
ADDITONAL PARTS:
SBS-IBEX 4-PIN SET
SBS-IBEX ARM ROD
SBS-IBEX 4-POINT PIN PROBE
SBS-IBEX 2-POINT PIN PROBE
SBS-IBEX CLIP PROBE
SBS-IBEX DC CLAMP
SBS-IBEX POLY BAG
SBS-IBEX LI-ON BATTERY
SBS-IBEX SHUNT
SBS-IBEX CHARGER
SBS-IBEX CASE |
|
|
|
