|
|
Gas filter with polypropylene fleece filter pad (standard 50 µm) for cleaning gas and air, EC type tested and certified.
DN: 15 to 250,
connection: thread or flange,
pe: max. 1, 4 or 6 bar.
|
|
Vokes E228F & E229F - up to 1.8m³/hr (30 l/min)
Simplex drop sump Microfelt filters for low flow distillate fuel oil systems, for example medium speed diesel engines.
* Compact simplex filter
* Vokes Microfelt disposable filter cartridges
* Suitable for engine mounting
* Easy to service
Outline Specification
Flow Capacity up to 1.8m³/hr (30 l/min)
Design Pressure 6.9 barg
Max Operating Temp 60°C
Design Drop sump type. Simplex with cast head and drain bowl, suitable for engine mounting.
Closure Centre bolt
Materials
Filter Case - Carbon Steel
Filter Head - Aluminium
Seal - Nitrile Rubber
Connection Sizes E228F - ½ in (13mm)
E229F - 1 in (25mm)
Inlet/Oulet Type Tapped 'G' (BSP)
External Finish Vokes blue enamel
Internal Finish Lightly oiled
Filter Cartridge
Type Microfelt
Quantity Single cartridge
Efficiency 1 to 20µm (nominal)
|
|
The emulsions used in mechanical workings and the liquids used in washing machines, accumulate light products which do not mix with water on the surface.
This veil, which can reach considerable sizes, from 0,1 to 2 mm, creates a barrier and prevents air from entering into contact with the emulsion.
This allows for the formation of anaerobic flora bacteria, which are the main causes of the decay and the putrefaction of the emulsions.
The SKIM eliminator of superficial oils, thanks to its particular shape, to the materials used and to its installation and utilization facility, is adaptable to being used in any kind of basin or tank.
Due to its great supply of accessories it is possible to position the SKIM either on the basin edge, or on the cover, or encased, or on an internal structure.
Functioning: the disc, immersed into the liquid, due to its rotation, pushes outside the polluting agents that stick to it.. The disc, whilst rotating, meets two scrapers fitted with a rubber edge which remove everything that gets stuck to the disc and through the appropriate off-let directs them outside.
It has been proved that the use of SKIM maintains the quality of the refrigeration for a long time whilst eliminating bad odours that generate in the presence of anaerobic flora bacteria.
|
|
| ... products without technical information |
| |
The Teddington SOV, Solenoid Gas Valve, is designed for use on appliances such as cookers, hob units, grills, hotplates etc., and acts as an on/off control (with or without by-pass) or safety shutoff, thus making it ideal for electronic cooking.
The SOV can also be used on weep lines on gas servo valves controlling larger installations and on fuel oil lines on domestic oil fired appliances.
This unique product utilises the well-proven Teddington solenoid coil, with a lightweight aluminium body. Its compact size adds a new dimension – SMALL – thus allowing freedom to use the valve where space is at a premium.
|
|
| ... products without technical information |
| |
|
Use : this cable is suitable for signaling and control systems, connection of industrial equipments, machine tools, etc…specially xhen a high degree of iol resistance is required.
|
|
Realization cables details, ANTIOLIO, immersion.
Cut, sguainatura, spelatura from 0,12 to 200 mmq
Seam finishes them and capocorda to knots or preblocks, nastrati or melted.
Labelling to warmth or jet or with labels.
Working cables plates step 1,27 and 3,96
Supply Harmonized, special cables, UL, AFUMEX, TEFLON, TEFZEL
Resinatura cables with I rendered some epoxy
Sovrastampaggio cables
Visual tests and work them
Test of rigidity, isolation, short circuit, continuity.
Fatigue tests
Tests of traction
|
|
DTSYB Boilers With Thermal Heat Exchangers
DTSYB and DTSYB-X Series is a single serpentine boiler that prepares hot water by the circulation of Thermal Red Hot Oil or Steam through its serpentine. The serpentine material in this Series is selected accordingly to the fluid, since the fluid to be circulated is oil based or steam. In X series it has an electrical command panel too. It produces hot water by the circulation of Thermal Red Hot Oil/ Steam or by the use of electric energy.
Floor Standing Type
Installation Way; Vertical
Avaliable to connect thermal line(red hot oil, steam, water)
Avaliable to Connect Solar Panel, Central Heating System, Central Heater Tank
Economically, High Efficient
200 - 2000 Liters Capacity Range
Bimetal Thermometer
Pressure Relief P Valve
Temperature Sensor Connection Hole
(Avaliable For Re-Circulation And Closed Line Pump Control)
Glass Wool / Polyurethane (Cfc Free) Insulation
Electrostatic Epoxy Coated Main Body
Drain Tap
Smart Apperance
2 Years Whole Warranty
10 Years Supplying Spare Parts Warranty
Optional Features
Avaliable Additional Heating Elements
Available Additional Electrical Command Panel
Temperature and Pressure T&P Valve
|
|
MILL-RIGHT® N, ES and V Oil Seals
Benefits
* Breakthrough anti-abrasion and anti-wear properties for extended service life
* Improved chemical resistance through the entire range of elastomers
* Available in all elastomeric KLOZURE® Oil Seal designs
Industries Served
* Mining
* Primary Metals
* Pulp & Paper
* Original Equipment Manufacturers
* Chemical Processing
* Food & Pharmaceutical
* Hydrocarbon Processing
* General Industry
* Aggregate
|
|
| ... products without technical information |
| |
HyFlex® 11-920
A revolutionary combination of excellent grip and strong oil-repellence.
Combining a sure grip on lightly oiled parts with keeping hands clean and protected from oil contamination has been a real challenge. Now Ansell introduces the uncompromising HyFlex® 11-920. Designed with patented Ansell Grip TechnologyTM, the glove provides an excellent grip on lightly oiled parts while protecting skin from oil contamination. The 11-920 also offers all the essential features of the HyFlex® range of gloves, including durability, comfort and dexterity.
|
|
Oil resistant Nitrile Gloves, light flexible and a great alternative to cotton and leather gloves.
Designed for wet or dry in light general purpose conditions
|
|
The oil management system controls the oil level in the compressor crankcase. The system consists of the following ESK-components:
• ESK – Oil Separators
• ESK – Reservoir
• ESK – Oil Level regulators
• ESK – Pressure Valve
• ESK – Strainers
The oil carried over by a compressor in parallel systems has to be returned in the same quantity under all operating conditions. ESK-Oil management systems provide this control and work reliable.
Oil management systems are essential to control oil level if different compressor models are equipped in one a refrigeration system.
|
|
| ... products without technical information |
| |
TCAZ/TCASZ :
- Knurled plugs with dipstick
- Knurled plugs with dipstick and breather hole
TCA/TCAS :
- Hex plugs with dipstick
- Hex plugs with dipstick an breather hole
TMDA/TMDFA/TMDFA-BR :
- Filler breather with large breather hole and dipstick
- Filler breather with large breather hole, dipstick and filter
- Filler breather with large breather hole, dipstick and filter in sintered bronz
TMDFA/AL :
- Filler breathers with dipstick, anti-splash disc
TMDAV :
- Filler plug with one way air vent valve and dipstick
TPA/TPFA/TPAV :
- Press-fit filler breather with large breather hole and dipstick
TPBA/TPBAS/TPBAF :
- Low profile press-fit plug with dipstick
- Low profile press-fit plug with breather and dipstick
- Low profile press-fit plug with breather, filter and dipstick
TFA :
- Filler breather caps with internal thread and dipstick
AL/1 - AL/2 - ALS/1 - ALS/2 :
- Dipstick, press-fit with one seal
- Dipstick, press-fit with 2 seals
- Dipstick, press-fit with one seal and breather hole
- Dipstick, press-fit with 2 seals and breather hole
|
|
The HMP228 is a fast, reliable and accurate on-line detection system for water in oil.
Moisture measurements from lubrication oil can significantly cut maintenance costs and prolong machine lifetime. The HMP228 measures water activity and temperature from oil. In connection with oil, water activity measurement offers several advantages compared to the traditionally measured variable, parts per million (ppm). Water activity indicates directly whether there is risk for free water formation. The measurement is independent of the type, aging or temperature of the oil.
|
|
| ... products without technical information |
| |
Technical data :
Max. temperature : 90°C
Frequency : 50Hz
Votage : 3x400V
Power : 3,5 kW
Capacity of the tank : 90 l
Inside dimensions : L 280mm, H 300mm, P 320mm
External dimensions (±10%): L 525mm, H 750mm, P 760mm
Equipment :
- Isolated metallic casing.
- Agitator at the rear of the tank to obtain a good uniform oil temperature.
- 2 immerged heaters with integrated temperature control.
- Tank cover.
- Oil drain cock.
- Basket with handles for the quenching of parts and their draining off.
- Filling and working oil level indicators.
- Nominal power of the fan: 1500 m3/h.
|
|
Multipurpose oil and gas quenching furnace with two chambers
Compact system for minimum space requirement
Gas quenching possibility allowing the treatment of huge grade of steel
Heating chamber held in temperature for important energy saving
Fully automatic handling system by deformable parallelogram and telescope
|
|
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x
The robust housing of the OMNIPORT 20 allows usage in harsh industrial environments.The readability of the large illuminated display is excellent. The easy to understand menu and the practical thumbwheel navigation offer outstanding comfort.
An optional carrying case can accommodate the display unit, up to 5 sensing probes as well as accessories such as cables and calibration kits.
|
|
Vaisala HUMICAP® Hand-Held Moisture and Temperature Meter for Oil MM70 enables reliable detection of moisture in oil. It is ideal for the preventive maintenance of oil-filled systems. The brobe can be inserted directly into the process pipe through a ball valve - without draining the system. The measurement is independent of oil type, age and temperature.
The MM70 features the Vaisala HUMICAP® Sensor which is known for its excellent pressure, temperature and chemical tolerance.
|
|
|
