|
|
Oil/water separating filter.
The delivery filter is a waterabsorbing cartridge. This provides extra protection for engines that are refuelled at the station.
These filters separate and absorb any water that may be found in the diesel fuel. The absorption of water gradually reduces the filtering capacity and increases the head loss caused by the filter.
The filter must be replaced when it becomes saturated.
Characteristics:
Filtering capacity 30 μm / 10 μ
Flow rate 60 - 100 l/min
Operating pressure 3.5 bar
Bursting pressure 10 bar
|
|
The CJC™ Blue Baleen OilAbsorb System are polishing systems, used to absorb oil from bilge water to below 5 ppm.
Based on a unique absorption principle with the specially developed and patent pending CJC™ Blue Baleen CJC™ OilAbsorb Inserts, the systems absorb oil from bilge water, process and waste water, ensuring environmentally friendly operations and constant and compliance with environmental regulations or internal ISO 14001 Objectives and Targets.
Typical applications are marine bilge water systems, wastewater treatment, rinse water and process water for recycling purposes.
With low operational costs, and practically no maintenance requirements, the CJC™ Blue Baleen OilAbsorb Systems are cost-effective solutions to bilge- and wastewater problems within industry and marine applications.
|
|
Filters separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets
|
|
| ... products without technical information |
| |
The MonoScour filter is a heavy duty, high rate gravity filter designed for treating high turbidity loads and difficult particulates such as those typically encountered following chemical treatment with polymers and coagulants. It is particularly useful following clarifiers, lime softeners, in wastewater applications, cooling tower side stream filtration and all other gravity filter applications where high filtering rates are required.
The MonoScour filter is fully automatic and incorporates a self-contained backwash compartment that eliminates the need for backwash pumps and tanks. It also includes a vigorous air scour step to efficiently clean the filter media while minimizing the volume of backwash water consumed.
The Monovalve gravity filter is the predecessor to our Monoscour Filter product line.
|
|
97FB-CI: Cast Iron, Simplex, Basket Strainers
Description:
Series 97FB-CI Cast Iron, Simplex, Basket Strainers feature an angle-designed basket, cast iron body with flanged connections, stainless steel screen, bolted retainer cap (Model 97FB-CIB) or clamped retainer cap (Model 97FB-CIC) and cast-iron blow-off plug. Sizes 8 to 12 in. (200 to 300mm) have a side drain facing outlet of the strainer. Model 97FB-CIB - Maximum Pressure (non-shock): 200psi (14 bar) @ 150°F (66°C) WOG, 125psi (9 bar) @ 353°F (178°C) WSP. Model 97FB-CIC - Maximum Pressure (non-shock): 50psi (3 bar) @ 150°F (66°C) WOG.
|
|
| ... products without technical information |
| |
Graver Pressure Filters have proven their ability to meet any water filtration problem efficiently and economically in hundreds of installations worldwide, and in a wide range of industrial plants, municipalities and utilities.
Graver Pressure Filters are available in vertical and horizontal designs, in any convenient size, and with valve arrangements to meet any custom or special requirements.
For individual bed areas of 100 square feet or less, the vertical pressure filters are usually furnished. For greater areas, a horizontal pressure filter is more practical. In applications where a large quantity of water is to be filtered, a battery of filters is installed in parallel to provide the necessary throughput.
|
|
Remove bulk water from your compressed air or gas system
Bulk water, which exists in air or compressed gas systems, causes corrosion of piping, damage to valves, cylinders, pneumatic tools and machinery, and reduces the effectiveness of aftercoolers/heat exchangers. Over 99% of bulk water can be easily and economically removed by installing a type XWS Water Separator. Your compressed air and gas system will operate much more efficiently with reduced downtime and maintenance costs. This upgrade will also improve the effectiveness of aftercoolers, refrigerant dryers, filters and other downstream equipment.
Options:
* Automatic float drain
* External electronic drain
* High pressure versions
* Stainless steel construction
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
