|
|
The CJC™ Blue Baleen OilAbsorb System are polishing systems, used to absorb oil from bilge water to below 5 ppm.
Based on a unique absorption principle with the specially developed and patent pending CJC™ Blue Baleen CJC™ OilAbsorb Inserts, the systems absorb oil from bilge water, process and waste water, ensuring environmentally friendly operations and constant and compliance with environmental regulations or internal ISO 14001 Objectives and Targets.
Typical applications are marine bilge water systems, wastewater treatment, rinse water and process water for recycling purposes.
With low operational costs, and practically no maintenance requirements, the CJC™ Blue Baleen OilAbsorb Systems are cost-effective solutions to bilge- and wastewater problems within industry and marine applications.
|
|
Oil/water separating filter.
The delivery filter is a waterabsorbing cartridge. This provides extra protection for engines that are refuelled at the station.
These filters separate and absorb any water that may be found in the diesel fuel. The absorption of water gradually reduces the filtering capacity and increases the head loss caused by the filter.
The filter must be replaced when it becomes saturated.
Characteristics:
Filtering capacity 30 μm / 10 μ
Flow rate 60 - 100 l/min
Operating pressure 3.5 bar
Bursting pressure 10 bar
|
|
Filters separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets
|
|
| ... products without technical information |
| |
DW
Dimension-
14.7 X 5.4 X 12 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
SW
Dimension-
19.8 X 6.4 X 15.15 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
The sealed sub-miniature MP420 microswitch is a simple snap-action
changeover switch, which is connected by means of a cable directly, overmoulded into the housing.
|
|
- Connector industry PCB, solder terminal lugs or PVC cable
- Conforms to standard IP 67
- Silver or gold-plated contacts
- Wide choice of levers
- Operating temperature up to 130°C / 266 °F
|
|
saia subminiature waterproof micro-switch
Caractéristiques :
• div. chevilles de fixation
• bornes à souder
• raccordement rapide de 2,8 mm
• bornes pour CI
• div. formes de levier possibles
• étanchéité IP67
Pouvoirs de coupure : 250 V/CA, 5 A
Dimensions (mm) : 20 x 17,5 x 6,4
Organe de commande :
• poussoir
• levier plat
• levier à galet
Homologations : UL, CSA, ENEC
|
|
Features
- Silicon-free version available
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted)
- Various contact materials available, depending on application
- Mechanical life: min. 1 x 106 operations
- Wide variety of connection options
|
|
DW
Dimension-
14.7 X 5.4 X 12 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
SW
Dimension-
19.8 X 6.4 X 15.15 (mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Automotives, White goods,
Security System, Electric Devices
|
|
The sealed sub-miniature MP420 microswitch is a simple snap-action
changeover switch, which is connected by means of a cable directly, overmoulded into the housing.
|
|
- Connector industry PCB, solder terminal lugs or PVC cable
- Conforms to standard IP 67
- Silver or gold-plated contacts
- Wide choice of levers
- Operating temperature up to 130°C / 266 °F
|
|
saia subminiature waterproof micro-switch
Caractéristiques :
• div. chevilles de fixation
• bornes à souder
• raccordement rapide de 2,8 mm
• bornes pour CI
• div. formes de levier possibles
• étanchéité IP67
Pouvoirs de coupure : 250 V/CA, 5 A
Dimensions (mm) : 20 x 17,5 x 6,4
Organe de commande :
• poussoir
• levier plat
• levier à galet
Homologations : UL, CSA, ENEC
|
|
Features
- Silicon-free version available
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted)
- Various contact materials available, depending on application
- Mechanical life: min. 1 x 106 operations
- Wide variety of connection options
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLB RLBE and RLBH range : 400 - 6000 KW cooling power.
|
|
* Synoptic of operation on LCD screen
-Display of the exit water temperature
-Status of the Chiller : on/off
-Status of the pump : on /off
* Synoptic of alarm on LCD screen
-Therma alarm of the compressor
-Alarm of low water level in the tank
-High and low alarm of the refrigerant pressure
Ø allow to know and repair the breakdown very quickly and thus reduce at the maximum the downtime.
|
|
Chilly: Cooling water - Industrial compact water chiller
Standard equipment
Waterlevel control outside
Stainless steel coil evaporator
High tech. scroll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved high pressure switch
Chiller IP 44
Operating temperature max. 42° C ambient
Plastic water tank
Draining through water level control
Environment friendly refrigerant R 407 c
Internal by-pass for pump protection
Non ferrous water circuit
CE-Standard / ISO 9001 / EN 60204
Grundfos/Speck pumps
Water connection quick cuppling
Options:
Water outlet manometer
Waterlevel switch for pump-protection
Common alarm (potetial free)
2 x water inlet / outlet
Special voltage
Flow switch
Autom. fresh water supply
|
|
|
The gwk compact chiller weco with air or watercooled condensers of up to 250 kW cooling capacity are developed in various technical designs and with more than 20 different performance gradings.
|
|
| ... products without technical information |
| |
Feed Water Deaeratores
Packaged Deaerator systems, 5,000 to 200,000 PPH. Conditions feedwater to 0% CO2 and .005cc/liter of oxygen.
imageThe HURST "OXY-MISER" deaerating boiler feedwater system eliminates the need of expensive oxygen scavenger chemicals and also offers the following advantages:
* Removes carbon dioxide as well as oxygen.
* Raises the boiler feedwater temperature, eliminating thermal shock in boilers.
* Improves overall boiler room efficiency.
* Feedwater pumps are sized for each individual application - assuring total compatibility and optimum operation.
* Vessels are ASME Code constructed for 50 psig.
* Compact design means smaller boiler room requirements.
|
|
|
|
|
|
Dissolved gases such as oxygen and carbon dioxide must be reduced in Boiler Feed Water in order to prevent boilers and steam circuits from corrosion. The thermo-physical deaeration process is by far the most applied technology when a reduction of oxygen to only a few parts per billion is required. While part of the BONO Group, ARTES Ingegneria is in the business of Deaerators since 1958.
The degassing process is achieved in the deaerating tower where make-up water is atomised on a set of special packing that increases the contact surface between water and steam. Oxygen and carbon dioxide are stripped by the steam flow and vented through a calibrated orifice. Deaerated water is collected in the storage tank so as to assure an adequate “Hold-up” time for the boiler downstream.
According to the design capacity and steam flow, the deaerating tower may be arranged on a vertical or horizontal geometry so that, in the latter case, a larger surface of mass and heat transfer is implemented.
Deaerators are manufactured and marketed on BONO Artes’ own proprietary design in order to assure the complete responsibility of the concerned unit.
|
|
Features:
- Low level Indicator light
- Pressure regulator with water removal for incoming air
- Single valve operation to pressurize and discharge pot
- Abrasive rated discharge valving
- Cover and Screen
|
|
|
|
|
|
Abrasive storage hopper
TSA I
Application in all the systems:
The TSA I was conceived to adapt on all new systems LDSA or already in service Its implementation does not require any adaptation and can be installed without overcost on a system already in production.
The TSA can also adapt to the other systems of the market, and for the majority without modification.
A tested technology:
The TSA was conceived by using principles simple and known, it integrates a valve into guillotine planned for an operation in an abrasive and corrosive environment.
One long period of in situ tests enabled us to validate one exceptional lifespan without any maintenance operation.
Safety:
The TSA respects all the security standards in force and is delivered with an integrated scale.
The opening of the big-bag requires cutting tool, therefore no risk that the operator cuts himself.
A strong point: facility of use:
The operation of the machines of cutting by abrasive water jet, requires an increased availability of the operator and an important autonomy for a work without operator.
With the TSA you can directly store a big bag of 1 ton or 2 tons and to have a very great autonomy.
The big bag is in charge with a means of handling (overhead travelling crane or lifting truck), it is then open via a trap door of access envisaged for this purpose. The big bag provided by LDSA does not require a cutting tool to open them on the lower part, a system "sock" is envisaged.
The big bag once opened, it is enough to open the guillotine valve and the system automatically filled SAEB ERAKAT.
|
|
|
|
see the results for the following category : 
