|
|
Each filter houses bag type elements mounted onto a division plate and held positively in position by means of snap rings.
The elements are manufactured from man-made cotton fibre and offer high dirt holding capacity combined with a low maintenance costs and quick change out of filter bags, making this a cost effective means of filtration.
The filter bags are fully supported in robust stainless steel support housings, and will meet the levels of efficiency corresponding to your requirements.
|
|
|
|
|
|
Simplex Bag Filters PVC / CPVC
Simplex Bag Filters PPL / PVDF
Duplex Bag Filters
Filter Bags
Accept Most Standard Filter Bags:
For application versatility these all plastic housings will accept most standard 7" diameter filter bags. The single length vessel uses Size 01 bags, 7" x 16", while the double length vessel uses Size 02 bags, 7" x 32". This permits the vessel to be used with thousands of different types of filter bags to exactly match the applications requirements. With a Hayward PVC or CPVC bag filter you are not limited to just a few "non-standard" size filter bags.
Advanced Design:
This all plastic housing is designed to stand up to the most demanding industrial and commercial applications around. Rugged, thick wall construction ensures years of trouble free service and the housing is rated at a full 150 PSI. The built-in true union piping and drain connections makes installation and operation quick and easy. With this feature the filter housing can be removed from the piping system without having to break down the piping system. Just unscrew the assembly nut and remove the connecting pipe. The integral mounting base also makes for an easy installation and eliminates the need for extra cost support legs. The housing has two bottom outlet connections so that either can be used as a drain connection. This makes possible both in-line or loop piping installations. The one-piece, corrosion resistant plastic body has an extremely smooth interior surface that is very easy to clean. The housing comes standard with a plastic cover vent valve.
Easy Bag Change:
The hand-removable, no tools required, spin-off cover makes filter bag changing quick and easy. There are no swing bolts to deal with as on a metal filter housing. Just a few turns of the built in 15" cover handle opens and closes the housing with little effort.
Corrosion is Never a Problem:
A metal filter housing will ultimately rust or corrode and contaminate the process media. This can never happen with a Hayward PVC or CPVC all plastic bag filter housing, it will never rust, corrode or contaminate the process media and the housings light weight makes installation easy.
|
|
Maxi-System
- Available with 4 bags, 8 or 12 on demand
- User friendly eye-bolt closure mechanism with spring assisted cover lifter
- Recuction of bypasses due to filterbag safety-lock
- Version in 1.4301 and 1.4571
- Surface glass beaded
- Optional with tangential inlet/outlet
Specifications
Max. Flow-rate: 160 m³/h
Filter area: 2 m²
No. of baskets: 4
Volume housing: 210 Liter
Weight housing: appr. 220 Kg
Installation height: appr. 226 cm
Installation: 4 Legs
|
|
Mini-System
Features:
- Cover with quick lock system
- Compact design, high efficiency
- Special connections on demand available
- Surface glass beaded, all housings inclusive mesh basket & filterbag
Specifications
- Max. Flow-rate: 6 m³/h
- Filter area: 0,09
- Volume housing: 3 Liter
- Weight housing: appr. 3,5 Kg
- Installation height: appr. 59 cm
|
|
Eco-System
Features
- Quickly and easy to open due to star handle
- Solid Cover, opening direction changeable in the field
- Solid bag holder, resists pressure surge
- Different gaskets available
- Material 1.4301 or 1.4571
- Surface glass beaded
- All Housings inclusive Mesh Basket & Filterbag
- Available as 10, 16 or 25 bar-version
- Excellent value for money
Specifications
- Max. Flow-rate: 20 m³/h
- Filter area: 0,25
- Volume housing: 16 Liter
- Weight housing: appr. 18 Kg
- Installation height: appr. 100 cm
|
|
- Large surface area at an economical cost
- Integral Sensor Switch for automatic filter monitoring
- Media is easily and quickly replaced
- DF is duplexed for continous-run applications
|
|
The Electric H2O BF Series Bag Filter remove suspended particulate from water and
other process applications. Contaminants such as pipe scale, grit, waxes, metal chips, rust and airborne debris from many sources are removed in a consistent, proven manner. Electric H2O offers a variety of bags designed to remove particles from 0.35 to 800 microns. Optional features include a system-matched pump, motor, PLC control, bag change out alarm, instrumentation and piping.
|
|
Bag filters have many uses in coolant filtration. They are often used as a pre-filter to remove large solid contaminants that might cause pump problems. They are well suited applications with modest solids loading. Chips and swarf that are porous can fill the bag, providing very efficient filter media use. Bags are a good pick on applications that require the contaminants to be packed in drums for disposal, as the bags collapse and pack easily.
Bag filters have a relatively small surface area, about 4 – 5 sq. ft. in the largest standard housings. Therefore, we do not recommend them where the solids form a thin impervious layer, blinding off coolant flow.
|
|
|
Bypass-free filtration and optimized capacity utilization. The cleaned solids remain in the filter bag and can be disposed of with it.
|
|
The bag filter is an advanced filter system with a basket strainer. An unfiltered liquid enters the housing above the bag or basket and passes down through them. Solids are contained inside the bag or basket, where they are easily and completely removed when the unit is serviced.
The bag filter's characteristics are high-precision, high-efficient and stability and it is designed and constructed in compliance with three major filtration principles: superb filtration , surface filtration and adsorption filtration.
|
|
| ... products without technical information |
| |
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
|
If an ECO-Jack toe jack can not be operated, the load can be lifted with an ECO-Jack AIR lifting bag ranging from 1.000kgs (2,200lbs) to 42.000kgs (92,800lbs). Fitting into the tightest areas with a collapsed height of 30mm (1.1-1.2inches), all models are light weighted and equipped with serrated lifting surfaces, markes centers, reinforced edges and safety instructions.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
INFLATABLE JACK
1-74 Ton
Highly flexible and lightweight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.
Uninflated jacks are only 25,4 mm thick, making seemingly impossible lifting tasks routine.
Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 8 bar.
In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 12 bar.
Large surface area and material flexibility allow jacks to lift loads on soft or ompressible surfaces without support cribbing being necessary.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
Big Bag for dangerous waste with UV inhibitors.
Reinforced by polyethylene liner, airtight.
Four lifting straps, 30 cm long, breaking load kg 1500.
Duffle top and plain base without discharge spout.
BIG BAGS UN APPROVED
UN 3/Y approved Big Bag with max. load 1000 kg.
Breaking point 6/1 with identity labelling, approval number "R" on yellow bottom as foreseen by D.l. 52 dated 03.02.1997.
Complete with liner.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
Big Bag with apron on top and sealed base
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with apron on top and ssealed base.
Size: 90 x 90 x 110 cm
SWL 1000 kg; SW 5:1.
Big Bag with run-in and run-out channel
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with run-in and run-out channel, 35 x 50 cm.
Size 90 x 90 x 110 cm
SWL 1000 kg; SF 5:1
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
