|
|
|
The BHS-Belt Filter can be used for separating sedimenting and abrasive solids from suspensions with little wear. The various filtrates are separated exactly and without intermixing. If required, the filter cake can undergo further treatment in the form of multiple reverseflow washing, suction drying or pressing.
|
|
Dual Belt Filters
These are sludge dewatering devices that apply mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned belts, by passing those belts through a serpentine of decreasing diameter rolls. The machine can actually be divided into three zones: gravity zone, where free draining water is drained by gravity through a porous belt; wedge zone, where the solids are prepared for pressure application; and pressure zone, where medium, then high pressure is applied to the conditioned solids.
Typically, a belt filter press receives a slurry ranging from 1 - 4 % feed solids and produces a final product of 12 - 35 % cake solids. Performance depends on the nature of the solids being processed.
Typical Applications:
- Food processing wastes
- Pulp & Paper wastes
- Chemical sludges
- Pharmaceutical wastes
- Industrial waste processing sludges
- Petrochemical wastes
|
|
Continuous belt filters Vacuum belt filters
Continuous belt filters are filters without auxiliary filter materials. Various filter fabrics are available for selection depending on the application.
|
|
PACT WGM have been engaged in the research and manufacturing of seperation equipment for 30 years and have supplied more than 3000 filter press units for more than 30 industries, including, chemical, metallurgy , and environmental protection industries. .PACT WGM makes and produces the frame, box , belt , and concentrating dewatering filter press. We can supply singular and entire equipment systems to customers.
CDYA and CDYC are advanced separating systems, which can operate continuously. They include, a driving system, a gravity dewatering system, belts, a washing belts system, guide rollers, an automatic protection system, a filter cake removal system, a pneumatic control tank, and an electric control panel
|
|
Working:
Dirty fluid is fed under pressure in to inlet manifold. It is distributed equally in 4 different plates. Filter papers clamped & supported between plates separate the dirt & form a layer (cake). This effects finer filtration. The same filter with pre-coating can add further to fineness of filtration.
Applications:
Suitable as centralized fine coolant filtration for finish grinding, filtration of high viscosity grinding fluids & filtration of honing oil with pre-coat arrangement.
Features:
Very large filtration area is accommodated relatively small dimensions. The unit shown is having 10 m2 filtration area.
Totally automatic pneumatically actuated operation.
Dirt is purged with compressed air to recover fluid.
Low initial & operational costs.
|
|
General description
HOFFMANN belt filters operate on the gravity filtration principle. Depending on the level of filtering required, filter paper with differing degrees of porosity are used.
These filters cleanse emulsions and low-viscosity oils used in machining of steel, castings, aluminum and other nonferrous metals. We recommend using stainless steel models when handling aggressive fluids, such as wastewater and chemicals.
|
|
|
We manufacture vacuum filters which use consumable filter paper for filtration. These vacuum filters can effectively handle viscous fluids up to 40 Cst. They require lesser space as dirty fluid tank and filter are together. They can easily be designed to handle much larger flows & dirt quantities. They use pump suction vacuum for filtration in addition to gravity head available. Pressure drop used is about 4 m of fluid column. Hence gathers more dirt layer to perform much better than all types of gravity filters.
|
|
| ... products without technical information |
| |
ESX 53
The perfect Sorter: In combination with the ESPERA Checkweigher ES 600 C the ideal solution for controlled price labeling.
|
|
|
Transver belt conveyors set new standards concerning hygienic aspects and convenient servicing. Fast and easy belt change, open frames for easy cleaning access and a sturdy construction for a maximum of availability in multi shift operation have been considered in the developement.
|
|
|
|
|
|
Cross-Belt Sorter
Advanced Automated Order Distribution System,
Returns Processing,
Mail Sorting System
BIs New Cross-Belt sorter incorporates many of the latest innovations together with GBI's proven programming and controls to provide a reliable, high capacity and flexible system. GBI's new Cross-Belt sorter features contactless induction motors to drive the cars and wireless infrared communications to transmit on-the-fly instructions reducing wear and maintenance requirements.
Each "smart car" is equipped with a central processing unit that is programmed to perform a myriad of dynamic functions such as belt acceleration, turn rate, distance and timing in a multitude of combinations as dictated by circumstances. Among our many features are automatic induction, full tracking, weigh-in-motion and dynamic deployment.
GBIs cross-belt sorter is capable of sorting products weighing up to 100 pounds, and is a perfect supplement to GBI's line of Tilt Tray, Bomb Bay (Carrier-Based), Hanging Garment, and Pick to Light sortation systems.
Cross-Belt Feature Rich System
- Sorts a wide range of items or packages with weights up to 100 pounds (46 kg)
-Fast Sort Rates: custom configurations
-Automatic Loading, allows for a high loading efficiency
-Propelled by contactless induction motors
-Smart Car Technology, uses infrared communications
- support and rapid expansion
- Dynamic on-the-fly car programming dictated by individual and unique requirements
- Custom Chute Configurations
- Custom Logic & Controls
- Flexible Sorter Layout & Configurations
- Fully Intgegrated with Host Systems
- 24 / 7 / 365 Technical Support
|
|
Compact Cross-Belt Sorter
Ideal for sorting small, fragile, or delicate items with any type of surface friction
Features:
Available horizontal or multi-level layout configurations
Non-contact inductive power transfer system
Open standard industrial network control design
Modular frame and cart design
Benefits:
Gentle handling of items being sorted
Discharge from a carrier is more accurate
Allows closer chute centers or selective positioning of sorted items
Less time required for commissioning
|
|
This system sorts individual materials to a designated place according to its own information specified by the bar-code or RFID attached to them by automatically distributing and collecting with the conveyor and sorter.
Those products are used for : Baggage Handling System ; Automated Postal Processing System and Logistics Processing System.
|
|
The cross belt sorter in vertical configuration features sorter carriers that are linked together. The carriers are returned underneath the sorter.
Advantages
* space-saving construction
* central take-away conveyor may be mounted inside the sorter
* all destinations are easily accessible
* safe infeed by linear induction (top-loader)
* safe transport as there is no cornering
|
|
Features
- Handles a wide range of different types of luggage
- Gentle and reliable sorting
- Non-contact drive, non-contact power supply maintenance-free
- Low noise
- Outstanding toughness and durability
Specifications
- Sorting capacity MAX 4000 cases/h
- Speed MAX 120 m/min
- Frame length No limitations
- Belt size 1000(W) X 1500(L) mm
- Cargo dimensions MAX 500(W) X 1350(L) X 700(H) mm
- Cargo weight MAX 45 kg/piece
|
|
MODEL RBT3
3-STRAND 90° ROUND BELT TRANSFER
Model
RBT3 provides an excellent method of transferring up to 100# product at
90° intervals. And, no drive is necessary when mounted into Roach line shaft driven conveyor. Each unit shown mounted in optional line shaft driven conveyor. Model at right includes optional frame cut-outs and blue paint.
NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.
|
|
| ... products without technical information |
| |
three heads wide belt sander for wood,calibrating+calibrating+polishing
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 3~100
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.08
5 Motor of Abrasive Belt (KW) 22+22+15
6 Speed of Abrasive Belt (m/s) 20¡¢20¡¢12
7 Abrasive Belt size L¡ÁD (mm) 2265¡Á1300
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.9
10 Feeding Speed (m/min) 5~30
11 Motor for Auto-feeding System (KW) 4
|
|
wide belt sander
R-P=contact roller+polishing pad
calibrating and fine pollishing to achieve better surface effect
heavy duty machine body guarantee stablity and durability
main parts are from German,Japan,USA to make good performance
customize furniture wide belt sander (furniture sanding machine),especially sanders other's manufacture can not manufacture
Parameter Data:MMH529R-P
1 Working Width (mm) 100~900
2 Working Thickness (mm) 3~100
3 Working Length (mm) more than500
4 Working Precision (mm) about 0.08
5 Motor of Abrasive Belt (KW) 22+15
6 Speed of Abrasive Belt (m/s) 18.5, 12
7 Abrasive Belt size LXD (mm) 2200X930
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation ) (m/min) 3~14
11 Motor for Auto-feeding System (KW) 2.2
12 Elevator System for Work-table (KW) 0.37
We product wide belt sander with working width from 600mm to 2000mm
|
|
|
THE MACHINE FRAME IS MANUFACTURED OF HEAVY DUTY STEEL PLATE TO MINIMIZE VIBRATION AND DEFLECTION. ALL PARTS OF THE MACHINE CAN BE EASILY OBTAINED FOR MAINTENANCE AND SERVICE. UNDER THE SANDING AGGREGATE AND THE PRESSUREROLLERS, IT’S THE STABLE FEED TABLE. AROUND THE TABLE, IT RUNS AN ENDLESS ANTI-SLIP CONVEYOR BELT. THE DRIVE IS POWERED BY A STRONG FEED MOTOR AND A VARIABLE SPEED CONTROL FROM 4 TO 16 METERS PER MINUTE. THE CONVEYOR BELT IS ADJUSTABLE WITH AN AUTO TRACKING UNIT. THE SANDING BELT RUNS AROUND THE CONTACT DRUM AND THE TENSION (OR IDLE) ROLLER. THE TRACKING OF THE SANDING BELT IS ACHIEVED BY AN ELECTRIC-EYE.
|
|
two sides,two heads,calibrating and polishing wide belt sander
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ¡Ý860
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (kw) 55¡Á2
6 Speed of Abrasive Belt (m/s) 20
7 Abrasive Belt size: L¡ÁD (mm) 2800¡Á1360
8 Motor for Upper-body Elevator (kw) 2.2
9 Feeding Speed (stepless speed variation) m/min 6~35
10 Motor for Auto-feeding System (kw) 7.5
11 Working Pressure (Mpa) 0.5~0.8
12 Compressed Air Consumption(m3/min) 1.1
|
|
Wide Belt Sander,Wood Sanding Machine,Heavy duty double sides four heads wide belt sander
MMH5813DR-RP
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ≥100
4 Working Precision (mm) ±0.1
5 Motor of Abrasive Belt (kw) 90×2+75×2
6 Speed of Abrasive Belt (m/s) 30
7 1st Abrasive Belt size: L×D(mm) 2800×1360
8 2nd Abrasive Belt size: L×D (mm) 3080×1360
9 Motor for Body-Elevator System (kw) 3
10 Feeding Speed (frequency conversion) m/min 6~35
11 Motor for Auto-feeding System (kw) 18.5
12 Working Pressure (Mpa) 0.6~0.8
13 Compressed Air Consumption (m3/min) 2.5
We product Wide Belt Sander,Wood Sanding Machine with working width from 600mm to 2000mm
www.bonasun.com
|
|
Heavy duty wide belt sander,double sides,four heads
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ¡Ý860
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (kw) 75¡Á2+55¡Á2
6 Speed of Abrasive Belt (m/s) 25
7 1st Abrasive Belt size: L¡ÁD(mm) 2560¡Á1360
8 2nd Abrasive Belt size: L¡ÁD (mm) 2800¡Á1360
9 Motor For Upper Body Elevator (kw) 2.2
10 Feeding Speed (stepless speed variation) m/min 6~35
11 Motor for Auto-feeding System (kw) 15
12 Working Pressure (Mpa) 0.5~0.8
13 Compressed Air Consumption(m3/min) 2
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
