|
|
Each filter houses bag type elements mounted onto a division plate and held positively in position by means of snap rings.
The elements are manufactured from man-made cotton fibre and offer high dirt holding capacity combined with a low maintenance costs and quick change out of filter bags, making this a cost effective means of filtration.
The filter bags are fully supported in robust stainless steel support housings, and will meet the levels of efficiency corresponding to your requirements.
|
|
|
|
|
|
Simplex Bag Filters PVC / CPVC
Simplex Bag Filters PPL / PVDF
Duplex Bag Filters
Filter Bags
Accept Most Standard Filter Bags:
For application versatility these all plastic housings will accept most standard 7" diameter filter bags. The single length vessel uses Size 01 bags, 7" x 16", while the double length vessel uses Size 02 bags, 7" x 32". This permits the vessel to be used with thousands of different types of filter bags to exactly match the applications requirements. With a Hayward PVC or CPVC bag filter you are not limited to just a few "non-standard" size filter bags.
Advanced Design:
This all plastic housing is designed to stand up to the most demanding industrial and commercial applications around. Rugged, thick wall construction ensures years of trouble free service and the housing is rated at a full 150 PSI. The built-in true union piping and drain connections makes installation and operation quick and easy. With this feature the filter housing can be removed from the piping system without having to break down the piping system. Just unscrew the assembly nut and remove the connecting pipe. The integral mounting base also makes for an easy installation and eliminates the need for extra cost support legs. The housing has two bottom outlet connections so that either can be used as a drain connection. This makes possible both in-line or loop piping installations. The one-piece, corrosion resistant plastic body has an extremely smooth interior surface that is very easy to clean. The housing comes standard with a plastic cover vent valve.
Easy Bag Change:
The hand-removable, no tools required, spin-off cover makes filter bag changing quick and easy. There are no swing bolts to deal with as on a metal filter housing. Just a few turns of the built in 15" cover handle opens and closes the housing with little effort.
Corrosion is Never a Problem:
A metal filter housing will ultimately rust or corrode and contaminate the process media. This can never happen with a Hayward PVC or CPVC all plastic bag filter housing, it will never rust, corrode or contaminate the process media and the housings light weight makes installation easy.
|
|
Mini-System
Features:
- Cover with quick lock system
- Compact design, high efficiency
- Special connections on demand available
- Surface glass beaded, all housings inclusive mesh basket & filterbag
Specifications
- Max. Flow-rate: 6 m³/h
- Filter area: 0,09
- Volume housing: 3 Liter
- Weight housing: appr. 3,5 Kg
- Installation height: appr. 59 cm
|
|
Maxi-System
- Available with 4 bags, 8 or 12 on demand
- User friendly eye-bolt closure mechanism with spring assisted cover lifter
- Recuction of bypasses due to filterbag safety-lock
- Version in 1.4301 and 1.4571
- Surface glass beaded
- Optional with tangential inlet/outlet
Specifications
Max. Flow-rate: 160 m³/h
Filter area: 2 m²
No. of baskets: 4
Volume housing: 210 Liter
Weight housing: appr. 220 Kg
Installation height: appr. 226 cm
Installation: 4 Legs
|
|
Eco-System
Features
- Quickly and easy to open due to star handle
- Solid Cover, opening direction changeable in the field
- Solid bag holder, resists pressure surge
- Different gaskets available
- Material 1.4301 or 1.4571
- Surface glass beaded
- All Housings inclusive Mesh Basket & Filterbag
- Available as 10, 16 or 25 bar-version
- Excellent value for money
Specifications
- Max. Flow-rate: 20 m³/h
- Filter area: 0,25
- Volume housing: 16 Liter
- Weight housing: appr. 18 Kg
- Installation height: appr. 100 cm
|
|
- Large surface area at an economical cost
- Integral Sensor Switch for automatic filter monitoring
- Media is easily and quickly replaced
- DF is duplexed for continous-run applications
|
|
The Electric H2O BF Series Bag Filter remove suspended particulate from water and
other process applications. Contaminants such as pipe scale, grit, waxes, metal chips, rust and airborne debris from many sources are removed in a consistent, proven manner. Electric H2O offers a variety of bags designed to remove particles from 0.35 to 800 microns. Optional features include a system-matched pump, motor, PLC control, bag change out alarm, instrumentation and piping.
|
|
Bag filters have many uses in coolant filtration. They are often used as a pre-filter to remove large solid contaminants that might cause pump problems. They are well suited applications with modest solids loading. Chips and swarf that are porous can fill the bag, providing very efficient filter media use. Bags are a good pick on applications that require the contaminants to be packed in drums for disposal, as the bags collapse and pack easily.
Bag filters have a relatively small surface area, about 4 – 5 sq. ft. in the largest standard housings. Therefore, we do not recommend them where the solids form a thin impervious layer, blinding off coolant flow.
|
|
|
Bypass-free filtration and optimized capacity utilization. The cleaned solids remain in the filter bag and can be disposed of with it.
|
|
The bag filter is an advanced filter system with a basket strainer. An unfiltered liquid enters the housing above the bag or basket and passes down through them. Solids are contained inside the bag or basket, where they are easily and completely removed when the unit is serviced.
The bag filter's characteristics are high-precision, high-efficient and stability and it is designed and constructed in compliance with three major filtration principles: superb filtration , surface filtration and adsorption filtration.
|
|
| ... products without technical information |
| |
Filter Collar Bonder™
Designed for attaching plastic circular collars to nonwoven filter bags
Suited for low-production assembly of bag filters for chemical and industrial liquid applications
Can assemble between 50 and 80 bags per hour*
Six-step welding process takes as little as 45 seconds to produce a reliable 360-degree bond
Speeds production by eliminating need for adhesives
Easy and quick tooling changes to accommodate collars from four to seven inches in diameter
Minimal training required
*For assembly of up to 200 bags per hour, Sonobnd's RingMaster™ is the machine of choice
|
|
|
|
|
|
AMERICAN FABRIC FILTER's technical sales staff gets to choose from dozens of fabrics when they're designing your filters, connectors or other custom products. First, we will talk to you about your requirements. Next, we will make suggestions for materials and designs. Finally, with your input and approval, we will custom manufacture the products quickly and cost-effectively.
In addition to common woven and non-woven textiles, we stock vinyl / rubber-coated fabrics, synthetic / stainless steel screening and a range of snap bands, webbing and hardware. We also work with an extensive range of special order fabrics for applications needing high temperature, chemical resistance, extra strength or air permeability. Many unique fabrics are, or can be treated to shed sticky dust, bleed static electricity or resist burning.
To determine exactly how much fabric you need to attain your desired level of filtration, use our handy air flow to cloth calculator. Remember that your manufacturer's reccomended bag size is most likely smaller than necessary to achieve proper filtration.
|
|
CONEX® /NOMEX® FELT/ (Aramid)
- Recommended continuous operation temperature: 400 F
- Maximum (short time) operation temperature: 425 F
- Resistance to alkalies: Good
- Resistance to mineral acids: Fair
P84® FELT/POLYIMIDE
- Recommended continuous operation temperature: 475 F
- Maximum (short time) operation temperature: 500 F
- Resistance to alkalies: Fair
- Resistance to mineral acids: Good
- Resistance to organic acids: Good
TORCON®/PROCON® FELT/PPS (fka RYTON®)
- Recommended continuous operation temperature: 375 F
- Maximum (short time) operation temperature: 400 F
- Resistance to alkalies: Excellent
- Resistance to mineral acids: Excellent
- Resistance to organic acids: Excellent
|
|
Synthetic fiber-based non woven filter products ensure uniform depth loading with optimal low pressure drop performance.
* 100% saturation with a special adhesive “tackifier” prevents migration of particles down to 5 microns
* Gradient density structure ensures uniform laminar air flow throughout the spray booth
* Non-discoloring High Temperature scrim backing
* F5 and F6 efficiencies as per EN 779:2002
* DIN-CERTCO Certification and Paint compatibility “Lacquer Test Certificates” are available on part of the product range
* Approved by major automotive manufacturers
|
|
3M produces advanced textiles for manufacturing high temperature filter bags which can be used at temperatures up to 700°F (371°C). This advanced fabric is used successfully in hot gas filtration baghouses.
Features
- Efficient particulate filtration
- High temperature capability
- Resistance to thermal excursions
- Abrasion resistance
- Retrofit existing baghouses
Applications
- Cement manufacturing
- Incineration
- Chemical Processing
- Metal Processing
- Petrochemical processing
- Product collection
- Coal combustion
|
|
|
|
|
|
Heavy-Duty Dust Collection
The continuous duty bag dust collector for those applications where cartridges will not work. The Bagtron comes in a full range of sizes, from 67 sq. ft. to 1750 sq. ft. of filter, thus giving CFM's of air moved from as low as 500 CFM and as high as 25,000 CFM. In addition custom / larger sizes are available.
Self Cleaning While Running
Online cleaning is accomplished by a solid state control board which sequentially energenizes solenoids, allowing diaphragm valves to dump compressed air from the storage header into the blow-down pipe. The blow-down pipes have orifices over the inlets of each bag. The primary air is then joined by secondary air in the clean chamber both to flex the bag, cracking the dust cake, and also to blow off the loosened dust. The large agglomerated dust particles will then fall to the hopper for discarge from the collector. The compressed air jet is processed through a Venturi before passing to the fabric of the bag.
Specifications
- 14 Gauge with ribs
- Magnehelic gauge
- 16 oz. singed polyester felt
- Internal Venturi
- Galvanized bag cages
- Nitro blue enamel
- 4.75" Dia bags - 6, 8, or 10 ft. long
Options
- Direct mounted blower/motor
- Volume control damper
- Fan silencer
- Bin vent design
- Rotary air lock
- Platform & ladder packs
- Explosion vents
- Photohelic gauge
|
|
Auto M shaker filter
The Auto M Z-Series is the latest generation of robust simple mechanically cleaned dust collectors suitable for non-continuous duty for industrial, commercial and educational locations.
Key features
• Neat, compact, unobtrusive, easy to clean exterior
• Robust weatherproof welded steel construction
• Electric shake cleaning, perfected by 30 years' experience
• No need for compressed air
• ATEX certified Baseefa 03 ATEX0225 for explosive dusts
• Simple maintenance, access from clean air side
• Many options including secondary filters to increase versatility.
Typical applications
• Metalwork, grinding, fettling, sanding, polishing
• Woodwork, dust extraction from small and medium workshops
• Bulk powders, chemicals, sack tipping, weighing, bagging
• Educational workshops – ceramics, metal work, crafts, woodwork,
|
|
U.S. Air Filtration baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications:
- Woodworking
- Powder processing
- Material handling
- Primary metals, including steel-making
- Metals fabrication: grinding, sawing, sanding, polishing
- Papermaking
- Ceramics manufacturing
- Mixing and blending options
- Mining
- Foundries
- Glass Plants
- Battery Plants
- Universities
|
|
FMK25 cassette filter
The FMK25 range of reverse jet cassette filters was developed for continuous operation in industrial process filtration and dust collection applications – incorporating the long established easily maintained Dantherm pocket fabric filter cassette.
Key features
• Tough galvanised steel construction
• Weatherproof for exposed locations
• Integral pre-separation chamber
• All maintenance from unit front
• Independently tested (FMKZ) with ATEX compliant features for explosive dusts
• Efficient cross flow / down flow inlet air pattern
• Wide range of integral or remote fans
Typical dust control and process applications
• Bulk materials handling – conveying, screening, sieving, mixing, bin/silo venting
• Building materials manufacture and distribution
• Chemical, plastics and pharmaceutical powders
• Processes with light or medium dust loading
|
|
TP type bag filters
The TRIPULS bag filter is a space-saving filter that still provides optimum performance.The complete filter element (filter medium plus frame), specially designed for the TRIPULS filter, allows optimum deformation of the filtering medium during the cleaning of the filter, comparable that undergone by a TP.
Each filter element includes three injection tubes. Their design and the resulting features (high flow and a big difference in cleaning pressure), combined with the special TRIPULS filter element, guarantee maximum filtration for low compressed air consumption.
These qualities, added to the compact construction, with the possibility of the horizontal or vertical assembly of the filtering elements, make the TRIPULS an ideal solution for many dust extraction problems, when the space available is restricted.
|
|
Venturis
Venturis add to the cleaning efficiency of pulse-jet baghouses. Standard Filter offers a wide variety of styles and sizes for both top and bottom removal cages. We can supply either spun or cast venturis manufactured from carbon steel, stainless steel, aluminum or galvanized steel.
|
|
S-Series tubular bag filter
The Dantherm S-Series budget dust collector range is a simplified version of the long established and respected Dantherm NF wood waste filter family. Quick to install and easy to operate, it is the ideal solution for the smaller workshop. It is designed for indoor locations and can be readily re-located as required
Key features
• Neat, compact, unobtrusive
• Quick and easy to install
• Bag or steel bin dust collection options
• Standard units in three sizes
• One bag size fits all
• Quiet running efficient 1450 RPM fans
• Simple maintenance
• Dantherm QF versatile clip together duct connections
Typical applications
• Woodwork, dust extraction from small and medium workshops
• Mixed workshop applications
• Educational workshops – ceramics, crafts, woodwork,
|
|
|
|
