|
|
Application
In the high pressure circuits of hydraulic and lubricating oil systems.
Performance features
Protection
against wear: By means of ultra-fine filter elements that meet even
the highest demands regarding cleanliness classes and
dirt-holding capacity.
Protection against
malfunction: By means of permanent filtration in the off-line circuits
excellent cleanliness classes can be achieved.
Special design features
Cover: The cover can be opened without special auxiliary tools.
Because of the cover design the filter element can be
changed almost without losing any oil.
Flow control valve: Over the flow control valve the FNS off-line filters are
connected directly to the high pressure pipe. The surplus
volume (e. g. in circuits with fixed displacement pumps)
from the high-pressure circuit is cleaned by the ultra
fine filter element.
Dirt
retention valve: Ensures that dirt accumulated in the filter is removed
together with the element. Settled dirt cannot return
into the system.
|
|
Off-line filtration is in many cases the only feasible principle to achieve the required system cleanliness in fluid power systems. Off-line or kidney loop filter units consist of a circulation pump coupled to an appropriately sized and selected oil filter. The oil is circulated through this external filter system independent from the existing or non existing flow in the main system.
The programme comprises small compact standard units as well as customised subsystems of variable sizes.
Off - Line filter BNF series
Interchangeable DIN filter elements
Low noise emissions
Easy installation
May also be used for filling and draining the reservoir
Compact dimensions and easy to install either on the tank top or side. DIN elements provide qualified system cleanliness.
|
|
The DUO3 off-line oil filter increases the availability and reliability of hydraulic and lubricant oil systems. For optimum oil filtration performance, more often than not filtering takes place in off-line circuits, where the oil filter can operate 24 hours a day independently of the main system, avoiding any changes in pressure and flow.
Fields of application
Typical fields of application include hydraulic systems, lubricating systems, hydraulic presses, injection moulding machines and machine tools. When rebuilding a system we recommend installation of an off line oil filter.
Design
Its low noise level and compact size make the DUO3 ideal for use in many different machines and working environments. For uniform and good circulation and oil filtration, the DUO3 has been fitted with a low pressure pump from our QPM range. This pump has few moving parts and is designed to have a long service life and consume little power.
|
|
CJC™ Fine Filters are offline oil filtration systems with integrated circulating pumps for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
CJC™ Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish).
The CJC™ Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
CJC™ Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil.
The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
|
|
Parker's Tanktopper Series features:
• Flows to 18 gpm
• 3 micron to 120 micron absolute
• Disposable or recleanable elements
• Visual and electrical indicators
• Microglass long life elements
• Inside-to-outside flow through the element
• Complete contamination removal during element service
• Optional magnetic prefiltration
• Optional dipstick
• Optional airbreather
• No tools required for servicing elements
|
|
Contaminated oil is drawn into the Parker Portable Purification System (PVS) by a vacuum of 25 In/Hg. The oil passes through the in-line low watt density heater where the oil is heated to an optimum temperature of 150° F (66°C).
The oil then enters the distillation column where it is exposed to the vacuum through the use of special dispersal elements. This increases the exposed surface area of the oil and converts the water to vapor form, which is then drawn through the condenser by the vacuum pump.
The water-free oil falls to the bottom of the column and is removed by a heavy duty lube oil pump. This pump forces the dry oil through a final particulate removal filter. Clean oil passes out of the unit, back to the reservoir — and into the system.
|
|
| ... products without technical information |
| |
|
this pump is suitable to carry oils,such as thick oill, diesel fuel and lubricator,animal and vegetable oil etc,also it is available to transport the fluidities with low flashing point by equipped with copper,gear such as gasolene and benzene,etc,take care that the media temperature shouldn it surpass 70 ℃ and the available temperature of oilpump against hitemperature shouldn it more than 300℃.the pump has safety valve itself when the pump works under the high pressure,shaft seal has skeleton oil seal,mechanical seal and stuffing seal,please it should be indicuted when placing order.
|
|
| ... products without technical information |
| |
Ganter has for many years been a well-known supplier of oil sight glasses made of plastic and aluminium. The range of products has now been enlarged to include oil sight glasses made of stainless steel and brass. In addition, an “ATEX” sight glass made of aluminium has been developed
for use in explosion hazard atmospheres which is available in three sizes with different threads, complying with the directives of the European Union for explosion protection.
|
|
|
Systems of assembly for tubes EMILE MAURIN the systems of assembly are elements of tightening which make it possible to build gauges, installations and operating systems at the same time easily and quickly by using sections of standard tubes, round or square. The very broad nut range of tightening cast solid or made up of several elements offers almost unlimited possibilities. The nuts of cast solid tightening allow very robust tubular constructions. In this case, one will use tubes of precision with an external diameter which remains in tight tolerances. The nuts of tightening made up of several elements are not indicated for tight tolerances because they can also be used with tubes of square section, which allows integration already existing systems.
|
|
The Liquid Level Gauge has been introduced to complement our range of liquid level sensors. The gauge is available for most liquid types (fuel, oil, water...) and can be etched with other data labels if necessary. The gauge has been designed with special features including fully configurable scaling, adjustable electronic damping and a fully adjustable low level warning indicator. Additional features include auto-dimming control and multi-coloured LEDs ensuring this device can be seen in all lighting conditions.
- Fully Configurable
- High Accuracy
- Low Level Warning
- Low Height and Recess Profile
-Simple Installation
- Lightweight
- Light Sensitive Auto-Dimming
- Available in Fuel, Oil, Water variants (plus others)
|
|
| ... products without technical information |
| |
Ganter has for many years been a well-known supplier of oil sight glasses made of plastic and aluminium. The range of products has now been enlarged to include oil sight glasses made of stainless steel and brass. In addition, an “ATEX” sight glass made of aluminium has been developed
for use in explosion hazard atmospheres which is available in three sizes with different threads, complying with the directives of the European Union for explosion protection.
|
|
|
Systems of assembly for tubes EMILE MAURIN the systems of assembly are elements of tightening which make it possible to build gauges, installations and operating systems at the same time easily and quickly by using sections of standard tubes, round or square. The very broad nut range of tightening cast solid or made up of several elements offers almost unlimited possibilities. The nuts of cast solid tightening allow very robust tubular constructions. In this case, one will use tubes of precision with an external diameter which remains in tight tolerances. The nuts of tightening made up of several elements are not indicated for tight tolerances because they can also be used with tubes of square section, which allows integration already existing systems.
|
|
The Liquid Level Gauge has been introduced to complement our range of liquid level sensors. The gauge is available for most liquid types (fuel, oil, water...) and can be etched with other data labels if necessary. The gauge has been designed with special features including fully configurable scaling, adjustable electronic damping and a fully adjustable low level warning indicator. Additional features include auto-dimming control and multi-coloured LEDs ensuring this device can be seen in all lighting conditions.
- Fully Configurable
- High Accuracy
- Low Level Warning
- Low Height and Recess Profile
-Simple Installation
- Lightweight
- Light Sensitive Auto-Dimming
- Available in Fuel, Oil, Water variants (plus others)
|
|
| ... products without technical information |
| |
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLA RLE and RLH range : 6-175 KW cooling power.
|
|
| ... products without technical information |
| |
The frying oil sensor CapSens5000 allows you to determine the quality of the frying oil reliably and precisely. Based on the dielectric constant, the polar compounds in the oil are measured. This method is well established and officially accepted as a screening method. By using the CapSens5000 instrument, you can change the oil at the right moment, saving procurement costs and ensuring best quality for your products.
CapSens5000 is equipped with state-of-the-art electronics and allows the data-transfer to a PC.
|
|
|
|
see the results for the following category : 
