|
|
• Weighing range up to max. 500 mg
• Additive dead load up to max. 2.5 g
• Protection class IP 44
• Housing material stainless steel
• Several interfaces available
|
|
Precision measurement of web tension is essential to ensure consistant product quality and to maximise productivity. Re spa load cells and strain gauges have been successfully applied to many thousands of applications across the world and have provided cost effective solutions to the demands of our customers.
The range of cells produced by Re spa satisfy all demanding applications and can be used for measuring the tension value of all materials including paper, cardboard, plastic film, foil, rubber and wire.
|
|
|
We suggests for all the load cells a particular kind of mounting accessories in order to obtain a correct application of the cell and guarantees top performances and precision according to the mechanical, electrical and pneumatical connections present on the structure which has to be weighed.
|
|
Order Code Z-SG
Input: analog sensor (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
Output via:
- analog signal (0/4..20mA, 0/2..10V, 0/1..5V)
- RS485 / RS232 Modbus RTU
Converter for load cells, mounting guide Din 46277, isolated to 1500 V (input-output-power supply). The transducer acquire signals from load cells (6-wire) and transmits the value with analogue standard (mA / V) and serial (ModBUS Rtu) output. It accepts up to N. 4 load cells (350 ohms) and also has a contact that can be configured as alarm or weighing stable (weighing in motion).
Extremely fast (sampling frequency set by 12.53 Hz at 151.71 Hz), it measures with sensibility from 1 to 128mV / V, and also has remote reset tare via serial or digital input.
Ideal to be used for weight complex measures, result of the action of multiple cells in parallel or with moving loads.
|
|
The LCT-01 is the world's most popular portable Load Cell Tester.
It is a stand-alone portable hand-held device that was especially designed to help technical people immediately analyze the condition of strain-gage based load-cells.
The LCT fits all common types of load-cells available in the market today: four wires, 6 wires (with sense) and all rated gain outputs.
It provides the user with the essential data needed about the conditions of the tested load-cell, such as physical distortion (possibly caused by overload, shock load or metal fatigue), and electrical conditions (bridge resistance, shielding and resistance to ground).
The LCT allows the user to test the load-cell whether it is installed or removed. The unit is fully computerized and battery operated. A 16 x 2 alphanumeric LCD display guides the operator through all test stages and clearly displays the results.
|
|
Output: 0/4-20 mA (±20 mA)
Accuracy class: 0,1 %
Input Range: 0,25-3,0 mV/V
Loadcell excitation: 10 VDC
Loadcell current: Max 200 mA
Nonlinearity: Max 0.02 %
Power Supply: 24 VDC
Case: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
Output: 0/4-20 mA (±20 mA)
Accuracy class: 0,1 %
Input Range: 0,25-3,0 mV/V
Loadcell excitation: 10 VDC
Loadcell current: Max 200 mA
Nonlinearity: Max 0.02 %
Power Supply: 24 VDC
Case: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
Output: RS232, RS485
Accuracy class: 0,01 %
Insignal range: 0-±2.5 mV/V
(0-±1.25, 0-±5.0 mV/V)
Loadcell excitation: 10 VDC
Lastcellsström: Max 200 mA
Nonlinearity: Max 15 ppm
Internal counts: 0 - 65535
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
Output: RS232, RS485
Accuracy class: 0,01 %
Insignal range: 0-±2.5 mV/V
(0-±1.25, 0-±5.0 mV/V)
Loadcell excitation: 10 VDC
Lastcellsström: Max 200 mA
Nonlinearity: Max 15 ppm
Internal counts: 0 - 65535
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
The RON series includes Crane Scales, Dynamometers and Tension Load Cells.
The RON 4000 is a loadcell with a built-in analog amplifier. This loadcell is specially designed to transmit load or force information to a controller/computer, as part of controlled tensioning and tension measurement.
For example, RON 4000 electronic Load Cells serve as tension
Load Cells for tension measurement and controlled tensioning of rubber belt conveyors or continuous weighing of steam piping in a power station to detect water condensation in pipes and drain them when the max. permitted level is reached.
The unique perpendicular hole structure of the loadcells neutralizes external moments and thus improves safety and accuracy.
The small and light loadcells ensure portability and low headroom loss for any application.
RON Crane Scales, Dynamometers and electronic Load cells
are used for weighing during lifting, overload prevention and tension, force and load measurement.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
Eilersen Electric also offers its expertise to customers with special requests where the capacitive technology can often be the solution to challenging applications.
Examples of customized solutions are: Stress measurements in roller bearings, Web tension measurements in paper and plastic foil manufacturing equipment, Monitoring of construction equipment, Load measurements in commercial vehicles etc.
* Classes OIML C1 to C6
* Atex versions
* Uncomplicated mechanical installation without protecting devices
* High overload and sideload capacity up to 1000 %
* Patented high reliability sensor - stainless steel, laser welded to IP68
* Uncomplicated electrical installation - coax cable only
* RS485, Profibus, Devicenet, CAN bus to PLC's, PC's, etc. and EE instrumentation
* 32 bit data word does away with dead weight compensation
* Withstands welding voltages and ESD to IEC 1000-4-4
|
|
When a FANUC Robot is fi tted with the FANUC „Force Sensor”, it enables the robot to perform High Precision assembly operations such as meshing of gears and close tolerance insertion of parts.
The Force Sensor can also be utilised when the robot is used to perform precision grinding and polishing applications.
FORCE GUIDED INSERTION
Force Control allows the insertion of shafts and pins into matching holes using the force sensor.
FORCE GUIDED PHASE MATCHING
The Force Control enables the assembly of gears and other mechanical components via phase matching.
FORCE CONTOURING
This function controls the force so that the robot constantly pushes the surface along the taught trajectories.
|
|
BZA made of aluminum
The radial force sensors of the BZA series are suitable for the direct measurement of web tension forces which occur in the manufacturing and further processing of webs.
The sensors are used like any common flange house bearings for the measurement of tension forces. Depending on the flow of the web and the distribution of the load, the sensors can be used single sidedly or as a pair of sensors.
Features
Tenfold overloading
Light weight design made of special aircraft aluminium
Very cost effective solution
|
|
FemtoTools sensors are highly precise and highly productive force sensing tools, which can measure forces down to nanonewton (10-9).
Conventional force sensors are usually based on strain gauges and can only measure forces down to milli-Newton (10-3). Our FT-S270 and FT-S540 are produced in a special manner, which is already successfully used in the IC industry, and allows to operate (work) in a unique (an unreached) force sensing range between the atomic force microscope (AFM) and conventional force sensors.
The individual calibration of the FT-S270 and the FT-S540 force sensors guarantees a high measurement accuracy and readout speed. A calibration data sheet is delivered for each individual sensor.
|
|
|
The ATI Multi-Axis Force/Torque Sensor system measures all six components of force and torque. It consists of a transducer, shielded high-flex cable, and intelligent data acquisition system, Ethernet/DeviceNet interface or F/T controller. Force/Torque sensors are used throughout industry for product testing, robotic assembly, grinding and polishing.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
|
|
|
|
FUTEK Advanced Sensor Technologies Multi Axis Load Cell are designed to measure a multiple of forces and moments simultaneously with a single Load Cell.
Multi Axis Load Cells can accurately measure up to six components (3 forces and 3 moments) of load. For example, Independent strain gauge bridges are used to measure three directions of force: Longitude, Latitude, and Vertical, as well as, the moments about each force direction. Separate receptacles or cables are provided for each axis of measurement. A careful structural analysis has been done to isolate the forces and moments, which results in a reduction of cross-talk sensitivities.
All designs are one piece flexures, machined and gauged to give optimum output, stiffness and durability. For example, one of our more innovative designs, the Stick Shift/Gear Shift Knob Transducer offers a lightweight, robust feature comprised of Anodized Aluminum and weighing as little as 9 oz. Its special ergonomically designed cover contains anti-slip notches for proper handling coupled with less hand strain on the user.
|
|
Multi-component force measurement places high demands on the measuring device. The characteristics of the force vector to be measured largely determine the result. The size and direction of the force application point, as well as the dynamics, should have as little effect as possible on the process.
With the new Kistler Type 9327, 9347, 9367 and 9377 sensors, our company's established experience and know-how is now available even for multi-component force measurements carried out by the customer. The precisely preloaded measuring elements are easy to fit and, as they come ready calibrated from the factory, they can be used immediately for multi-component force measurements.
|
|
Series 261A
Triaxial 3-component dynamic force link, ICP®
- Automotive Chassis and Other Vehicle Dynamic Measurements
- Monitor Cutting Tool Forces and Detect Tool Wear
- Provide Feedback for Force Limited Vibration Testing
- Measure Input Forces for Modal and Structural Testing
- Measure Impact Forces During Drop Testing and Crash Testing
|
|
|
|
|
|
For over a decade, FUTEK Advanced Sensor Technology has been supporting the Automotive Industries’ sensor requirements in endurance testing, validation, verification and qualification. Our Automotive Load Cells are designed to fit a wide range of applications from component testing to full assembly. Specialty products such as our Low Profile Spike Resistant Pedal Force Sensor, Bi-Axial Stick Shift Sensor, and Compact Seat Belt Sensor are selected and fully trusted product throughout the Automotive Industry.
Any of our Automotive Load Cells can be easily modified or customized to meet your requirements. The standard models are often available in our stock making it available for 24 hour shipping. All Load cells and Force Transducers are manufactured in the US. All Sensors are available with in-line signal conditioned amplifier and or TEDS / IEEE1451.4 option.
• Custom Strain Relief
• One piece construction suitable for endurance testing
• Low Profile Height
• Light Weight
• Available in Tension, Compression, and Multi-Component Loads
• Removable Mounting Plate
• Spike Resistant
• Excellent Off Center Loading
• Operating Temperature of -60° F - 200° F
• Capacity ranging from 10 lb to 100,000 lbs
• Utilizes Metal Foil Strain Gauge Technology
|
|
|
Sensors of industrial weighing in shearing, entirely welded stainless and seals IP68. Sensor 3510 is especially used for applications of weighing on hoppers, plates of weighing, and applications of measure of force. Exist of 300 kg to 5000 kg with homologation IOLM in 3000 divisions
|
|
If you have special requirements for your measurements, why not rely on transducers and sensors that optimally match your specific application? We develop and manufacture customized transducers for you that meet your specifications. Benefit from the market leader's experience and competence to get your custom-designed sensor.
Measure force using customized transducers from HBM - also available as multi-component transducers!
Benefit from the proven high quality, delivery reliability and global availability you already know from our standard range of products.
- Flexible design and quantity - be it small or large quantities. With or without amplifier - it's your choice
- Quick development and manufacturing - Rapid engineering and rapid prototyping make it possible
- Reliable through our competent After Sales service, two-year warranty, DKD calibration and ISO9001 certification
...at an excellent price/performance ratio!
|
|
Responding to specific projects is a part of our strength.
Are you looking for a solution for which no available component is to be found on the market? We will help you solving your problem by means of one of the special load cells we already realized or by developing a custom made model. Our design team will assist you in your project, from its very beginning till its complete realisation. Designing and realizing new solutions are our specialties; it belongs to our company's culture. During the last years, we have developed more than 1500 models and applications, from single part till medium and great serial production. We can present you a documented proposal including quotation within short time.
Even a part of an existing machine can, under certain conditions, become a force transducer measuring tension or compression. Transducers that will respond to your need at particularly competitive prices.
|
|
If you have special requirements for your measurements, why not rely on transducers and sensors that optimally match your specific application? We develop and manufacture customized transducers for you that meet your specifications. Benefit from the market leader's experience and competence to get your custom-designed sensor.
Measure weight using customized transducers from HBM - also available as multi-component transducers!
Benefit from the proven high quality, delivery reliability and global availability you already know from our standard range of products.
- Flexible design and quantity - be it small or large quantities. With or without amplifier - it's your choice
- Quick development and manufacturing - Rapid engineering and rapid prototyping make it possible
- Reliable through our competent After Sales service, two-year warranty, DKD calibration and ISO9001 certification
...at an excellent price/performance ratio!
|
|
Responding to specific projects is a part of our strength.
Are you looking for a solution for which no available component is to be found on the market? We will help you solving your problem by means of one of the special load cells we already realized or by developing a custom made model. Our design team will assist you in your project, from its very beginning till its complete realisation. Designing and realizing new solutions are our specialties; it belongs to our company's culture. During the last years, we have developed more than 1500 models and applications, from single part till medium and great serial production. We can present you a documented proposal including quotation within short time.
Even a part of an existing machine can, under certain conditions, become a force transducer measuring tension or compression. Transducers that will respond to your need at particularly competitive prices.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ KR1000 Robot Welder Force Monitor (For measuring electrode force on resistance welding guns)
ADVANTAGES:
• Robot checking of Electrode Force
• No need to stop robot cells for force checking
• Very fast payback
• Alerts operators to immediate faults & variations
• Can eliminate scrap due to weld deterioration
• Reduces equipment damage and wear
• Keeps force within preset limits
• Gives early warning of equipment deterioration
• Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000’s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn seals.
This self contained instrument uses a cell with a force sensor to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged.
|
|
|
|
